Reducing Delay Time at Signal Controlled Junction with the Help of Actuated Control
Ľubomír Černický 1  
,   Jana Kupčuljaková 1  
,   Jozef Paľo 1  
,   Alica Kalašová 1  
 
More details
Hide details
1
University of Zilina, Univerzitná 8215/1, 010 26 Žilina, Slovakia
CORRESPONDING AUTHOR
Ľubomír Černický   

University of Zilina, Univerzitná 8215/1, 010 26 Žilina, Slovakia
Publication date: 2020-09-01
 
Adv. Sci. Technol. Res. J. 2020; 14(3):149–157
 
KEYWORDS
TOPICS
ABSTRACT
Nearly every town faces traffic problem caused by continuously increase of traffic. Traffic collapses, congestions, accidents and a further negative impact on the environment are gradually becoming a common part of our lives. Junctions are the most critical points of the road network, which usually determine the capacity of the roads. Therefore, proper traffic organization at junctions is a necessity. This paper analyses actuated control in comparison to fixed control at signal-controlled junction. There is also case study of one problematic junction in this paper. With the help of microscopic simulation in Aimsun there are assessed 2 solution of this problematic junction, one of which is fixed control and other is actuated control. Actuated traffic control gives better results than fixed control.