PL EN
 
PL EN
Bieżące wydanie
O czasopiśmie
Zespół Redakcyjny
Redakcja i Wydawca
Opłaty za publikacje
Open Access

vol. 12, 2, 2018
 
 

GRADIENT COMPOSITE COATINGS FOR WORKING SURFACES OF BRAKING DEVICES
Mykhaylo Pashechko, Myroslav Kindrachuk, Ihor Humeniuk, Taras Berezhanskyi
Adv. Sci. Technol. Res. J. 2018; 12(2):1-5
DOI: https://doi.org/10.12913/22998624/70759
 

INCREASING EFFICIENCY OF FLEXIBLE MANUFACTURING SYSTEMS BASED ON COMPUTER PRODUCT GROUPING
Bogdan Palchevskyi, Antoni Świć, Helena Krestyanpol
Adv. Sci. Technol. Res. J. 2018; 12(2):6-10
DOI: https://doi.org/10.12913/22998624/92093
 

APPLICATION OF SUPPLY CHAIN MANAGEMENT IN CONSTRUCTION INDUSTRY
Nguyen Thanh Phong
Adv. Sci. Technol. Res. J. 2018; 12(2):11-19
DOI: https://doi.org/10.12913/22998624/92112
 

GEOMETRIC STRUCTURE OF THE C45 STEEL SURFACE AFTER CENTRIFUGAL BURNISHING AND PERPENDICULAR SHOT PEENING
Agnieszka Skoczylas
Adv. Sci. Technol. Res. J. 2018; 12(2):20-28
DOI: https://doi.org/10.12913/22998624/86208
 

IMAGE CLASSIFICATION FOR JPEG COMPRESSION
Jevgenij Tichonov, Olga Kurasova, Ernestas Filatovas
Adv. Sci. Technol. Res. J. 2018; 12(2):29-34
DOI: https://doi.org/10.12913/22998624/87041
 

THE EFFECT OF RFSSW PARAMETERS ON THE LOAD BEARING CAPACITY OF ALUMINUM 7075-T6 SHEET METAL JOINTS
Rafał Kluz, Andrzej Kubit, Dawid Wydrzyński
Adv. Sci. Technol. Res. J. 2018; 12(2):35-41
DOI: https://doi.org/10.12913/22998624/78670
 

EXPERIMENTAL STUDY OF THERMAL EFFECTS IN COOLING OF CIRCULAR CYLINDER IN LOCK-ON CONDITIONS
Adam Gnatowski, Marcin Sosnowski, Anna Pajdak, Jacek Sobczyk
Adv. Sci. Technol. Res. J. 2018; 12(2):42-51
DOI: https://doi.org/10.12913/22998624/78517
 

NUMERICAL ANALYSIS OF THE POSTBUCKLING OF THIN-WALLED COMPOSITE STRUCTURE WITH Z-PROFILE CROSS SECTION
Patryk Różyło
Adv. Sci. Technol. Res. J. 2018; 12(2):52-58
DOI: https://doi.org/10.12913/22998624/79829
 

USE OF THE FINITE ELEMENT METHOD TO DESIGN THE PROPERTIES OF SHAPED JOINTS MADE OF COMPOSITE MATERIALS
Andrzej Tadeusz Dylewski, Waldemar Łogin
Adv. Sci. Technol. Res. J. 2018; 12(2):59-64
DOI: https://doi.org/10.12913/22998624/86209
 

INVESTIGATION ON FLEXURAL BEHAVIORS OF I-SHAPED JOINTED COMPOSITE PLATES
Gurkan Altan
Adv. Sci. Technol. Res. J. 2018; 12(2):65-70
DOI: https://doi.org/10.12913/22998624/89756
 

THE ANALYSIS OF THE TRAFFIC SIGNS VISIBILITY DURING NIGHT DRIVING
Radovan Madleňák, Lucia Madleňáková, Dominika Hoštáková, Pawel Drozdziel, Adam Török
Adv. Sci. Technol. Res. J. 2018; 12(2):71-76
DOI: https://doi.org/10.12913/22998624/92103
 

PRELIMINARY ANALYSIS OF A ROTARY COMPRESSION TEST
Zbigniew Pater, Patrycja Walczuk, Konrad Lis, Łukasz Wójcik
Adv. Sci. Technol. Res. J. 2018; 12(2):77-82
DOI: https://doi.org/10.12913/22998624/86812
 

EFFECT OF SMALL ADDITIVES OF POLYAMIDE MODIFIED BY POLYVINYLPYRROLIDONE AND MONTMORILLONITE ON POLYPROPYLENE TECHNOLOGICAL PROPERTIES AND HEAT RESISTANCE
Volodymyr Krasinskyi, Oleh Suberlyak, Viktoria Kochubei, Yurii Klym, Viktoria Zemke, Tomasz Jachowicz
Adv. Sci. Technol. Res. J. 2018; 12(2):83-88
DOI: https://doi.org/10.12913/22998624/90924
 

INFLUENCE OF REDM PARAMETERS ON SURFACE’S SHAPE
Zbigniew Gulbinowicz, Olgierd Janusz Goroch
Adv. Sci. Technol. Res. J. 2018; 12(2):89-96
DOI: https://doi.org/10.12913/22998624/87065
 

BUCKLING STABILITY ASSESSMENT OF PLATES UNDER UNIAXIAL COMPRESSION
Farhad Riahi, Tadeh Zirakian, Vahed Mam Ghaderi, Souran Arya
Adv. Sci. Technol. Res. J. 2018; 12(2):97-105
DOI: https://doi.org/10.12913/22998624/90789
 

ASSESSMENT OF THE POSSIBILITY OF USING AN UNMANNED AIRCRAFT CLASS MINI TO ILLUMINATE TARGETS BY LASER
Andrzej Rypulak
Adv. Sci. Technol. Res. J. 2018; 12(2):106-111
DOI: https://doi.org/10.12913/22998624/92111
 

MECHANICAL PROPERTIES OF HAND-MAKING POLYESTER COMPOSITES
Anna Rudawska, Mateusz Malczarski, Dana Stančeková, Magd Abdel Wahab, Vladimira Schindlerová
Adv. Sci. Technol. Res. J. 2018; 12(2):112-120
DOI: https://doi.org/10.12913/22998624/91891
 

THE AIR FLOW INFLUENCE ON THE DRAG FORCE OF A SPORTS CAR
Zbigniew Czyż, Paweł Karpiński, Michał Gęca, Jacobo Ulibarrena Diaz
Adv. Sci. Technol. Res. J. 2018; 12(2):121-127
DOI: https://doi.org/10.12913/22998624/86213
 

MODELING OF SELECTED DESIGN CHARACTERISTICS OF CAM AND HYPOCYCLOIDAL DRIVES OF HIGH-PRESSURE FUEL PUMPS
Mateusz Bor, Tomasz Borowczyk, Wojciech Karpiuk, Rafał Smolec
Adv. Sci. Technol. Res. J. 2018; 12(2):128-136
DOI: https://doi.org/10.12913/22998624/87064
 

EVALUATION CRITERIA OF THE BELT CONVEYOR USING THE AHP METHOD AND SELECTION THE RIGHT CONVEYOR BY HURWITZ METHOD
Petr Průša, Stefan Jovčic, Svetlana Nikolicic
Adv. Sci. Technol. Res. J. 2018; 12(2):137-143
DOI: https://doi.org/10.12913/22998624/92092
 

EFFECT OF TECHNOLOGICAL PARAMETERS ON THE SURFACE ROUGHNESS OF ALUMINIUM ALLOYS AFTER TURNING
Ireneusz Zagórski, Tomasz Warda
Adv. Sci. Technol. Res. J. 2018; 12(2):144-149
DOI: https://doi.org/10.12913/22998624/87136
 

VISION GUIDED PARALLEL ROBOT AND ITS APPLICATION FOR AUTOMATED ASSEMBLY TASK
Vladimír Bulej, Ján Stanček, Ivan Kuric
Adv. Sci. Technol. Res. J. 2018; 12(2):150-157
DOI: https://doi.org/10.12913/22998624/91887
 

DISCRETE MODEL SIMULATION OF A PASSENGER CABLE CAR OPERATION
Gabriel Fedorko, Hana Neradilová, Juraj Jackanin
Adv. Sci. Technol. Res. J. 2018; 12(2):170-179
DOI: https://doi.org/10.12913/22998624/92108
 

MODIFICATIONS AlSi7Mg0.3 ALLOYS TROUGH Ca, Sr AND Sb
Jaromír Cais, Pavel Kraus, Irena Lysoňková
Adv. Sci. Technol. Res. J. 2018; 12(2):180-187
DOI: https://doi.org/10.12913/22998624/91886
 

APPLICATION OF THE ELASTIC-PLASTIC MODEL IN THE ANALYSIS OF THE DISPLACEMENT IN A ROCK MASS
Halina Marczak
Adv. Sci. Technol. Res. J. 2018; 12(2):188-196
DOI: https://doi.org/10.12913/22998624/82514
 

THE EFFECTIVENESS OF STRATEGIES PRINTING PRINTER EASY 3D MAKER
Jiří Kratochvíl, Marek Sadílek, Václav Musil, Marek Pagáč, Dana Stančeková
Adv. Sci. Technol. Res. J. 2018; 12(2):197-205
DOI: https://doi.org/10.12913/22998624/91890
 

ANALYSIS OF POSSIBILITIES TO IMPROVE ENVIRONMENTAL OPERATING PARAMETERS OF MODERN COMPRESSION – IGNITION ENGINES
Tomasz Osipowicz, Karol Franciszek Abramek, Dalibor Barta, Paweł Droździel, Maciej Lisowski
Adv. Sci. Technol. Res. J. 2018; 12(2):206-213
DOI: https://doi.org/10.12913/22998624/91892
 

MEASURING OF MECHANICAL RESISTANCES OF A HEAVY GOOD VEHICLE BY COASTDOWN TEST
Tomáš Skrúcaný, Štefánia Semanová, Martin Kendra, Tomasz Figlus, Ján Vrábel
Adv. Sci. Technol. Res. J. 2018; 12(2):214-221
DOI: https://doi.org/10.12913/22998624/91889
 

SURFACE MICROHARDENING STUDIES ON STEELS AFTER HIGH FEED MILLING
Jana Petrů, Tomáš Zlámal, František Špalek, Robert Čep
Adv. Sci. Technol. Res. J. 2018; 12(2):222-230
DOI: https://doi.org/10.12913/22998624/91888
 

THE CAUSES OF THE DAMAGE TO THE BEARING ROPE – THE FAILUREANALYSIS
Pavel Peterka, Jozef Krešák
Adv. Sci. Technol. Res. J. 2018; 12(2):231-236
DOI: https://doi.org/10.12913/22998624/92341
 

ASSESSMENT OF THE ECONOMIC EFFICIENCY OF THE MODERNIZATION OF CRUSHED STONE MANUFACTURING PROCESS: CASE STUDY
Jana Fabianová, Jaroslava Janeková, Michal Fabian
Adv. Sci. Technol. Res. J. 2018; 12(2):237-243
DOI: https://doi.org/10.12913/22998624/92299
 

REGRESSION MODEL CHANGE OF NORMAL CONTACT FORCES IN HEXAGONAL IDLER HOUSING FOR PIPE CONVEYOR LOADED WITH TRANSPORTED MATERIAL
Vieroslav Molnar, Beáta Stehlíková
Adv. Sci. Technol. Res. J. 2018; 12(2):244-251
DOI: https://doi.org/10.12913/22998624/92342
 

DETERMINATION OF CALIBRATION SPHERE PARAMETERS INFLUENCE ON THE RESULTS OF ARTICULATING PROBE HEAD QUALIFICATION
Maciej Gruza, Adam Gąska, Piotr Gąska, Wiktor Harmatys, Jerzy Sładek
Adv. Sci. Technol. Res. J. 2018; 12(2):252-259
DOI: https://doi.org/10.12913/22998624/92246
 

LOCKING THE MOVEMENT OF PERSONS ON THE BRIDGE CRANE
Jozef Kuľka, Martin Mantič, Melichar Kopas, Eva Faltinova
Adv. Sci. Technol. Res. J. 2018; 12(2):260-265
DOI: https://doi.org/10.12913/22998624/92459
 

SOLUTION APPROACHES TO DIFFERENTIAL EQUATIONS OF MECHANICAL SYSTEM DYNAMICS: A CASE STUDY OF CAR SUSPENSION SYSTEM
Tesfaye Olana Terefe, Hirpa G. Lemu
Adv. Sci. Technol. Res. J. 2018; 12(2):266-273
DOI: https://doi.org/10.12913/22998624/85662
 

RELIABILITY DETERMINATION AND DIAGNOSTICS OF A MECHATRONIC SYSTEM
Yuri Turygin, Pavol Bozek, Ivan Abaramov, Yury Nikitin
Adv. Sci. Technol. Res. J. 2018; 12(2):274-290
DOI: https://doi.org/10.12913/22998624/92298
 

STUDY OF THE EFFECT OF THE ELECTROLESS Ni-P COATING THICKNESS APPLIED ON AW-7075 ALUMINUM ALLOY ON ITS MECHANICAL PROPERTIES
Kazimierz Czapczyk, Piotr Siwak, Stanisław Legutko
Adv. Sci. Technol. Res. J. 2018; 12(2):291-297
DOI: https://doi.org/10.12913/22998624/92097
 

SELECTION OF AN APPROPRIATE DISTRIBUTION CHANNEL FOR HIGH-VALUE STONE
Nikoleta Mikušová, Eva Tomková, David Hrdlý, Petr Pruša, Rudolf Kampf
Adv. Sci. Technol. Res. J. 2018; 12(2):298-306
DOI: https://doi.org/10.12913/22998624/92354
 
Journals System - logo
© 2006-2024 Journal hosting platform by Bentus
Scroll to top