Scores:
10
MNiSW
92.2
ICV
 
 

Modelling of Conveyor Belt Passage by Driving Drum Using Finite Element Methods

Nikoleta Mikušová 1  ,  
 
1
Technical University of Košice, Letná 9, Košice, Slovak Republic
Adv. Sci. Technol. Res. J. 2017; 11(4)
Publish date: 2017-12-05
KEYWORDS:
TOPICS:
ABSTRACT:
The finite element methods are used in many disciplines by the development of products, typically in mechanical engineering (for example in automotive industry, biomechanics, etc.). Some modern programs of the finite element's methods have specific tools (electromagnetic, fluid and structural simulations). The finite elements methods allow detailed presentation of structures by bending or torsion, complete design, testing and optimization before the prototype production. The aims of this paper were to the model of conveyor belt passage by driving drum. The model was created by the program Abaqus CAE. The created model presented data about forces, pressures, and deformation of the belt conveyor.
CORRESPONDING AUTHOR:
Nikoleta Mikušová   
Technical University of Košice, Letná 9, 04200 Košice, Slovak Republic