PL EN
 
PL EN
Bieżące wydanie
O czasopiśmie
Rada Naukowa
Redakcja i Wydawcy
Opłaty za publikacje
Open Access

Autor Mirosław Szala

 

Effect of Water Absorption on Tribological Properties of Thermoplastics Matrix Composites Reinforced with Glass Fibres
Mariusz Walczak, Mirosław Szala, Daniel Pieniak
Adv. Sci. Technol. Res. J. 2022; 16(2):232-239
DOI: https://doi.org/10.12913/22998624/147515
 

Factors Influencing Cavitation Erosion of NiCrSiB Hardfacings Deposited by Oxy-Acetylene Powder Welding on Grey Cast Iron
Mirosław Szala, Mariusz Walczak, Tadeusz Hejwowski
Adv. Sci. Technol. Res. J. 2021; 15(4):376-386
DOI: https://doi.org/10.12913/22998624/143304
 

Wear-Fatigue Study of Carbon Steels
Tadeusz Hejwowski, Mirosław Szala
Adv. Sci. Technol. Res. J. 2021; 15(3):179-190
DOI: https://doi.org/10.12913/22998624/140200
 

Mechanical Properties and Sliding Wear Resistance of Suspension Plasma Sprayed YSZ Coatings
Leszek Łatka, Mirosław Szala, Wojciech Macek, Ricardo Branco
Adv. Sci. Technol. Res. J. 2020; 14(4):307-314
DOI: https://doi.org/10.12913/22998624/128574
 

A New Method of Flanges Extrusion in Hollow Products – Analysis of the Limiting Phenomena
Grzegorz Winiarski, Tomasz Adam Bulzak, Łukasz Wójcik, Mirosław Szala
Adv. Sci. Technol. Res. J. 2020; 14(4):78-85
DOI: https://doi.org/10.12913/22998624/125508
 

Numerical Analysis of a Six Stage Forging Process for Producing Hollow Flanged Parts from Tubular Blanks
Grzegorz Winiarski, Tomasz Adam Bulzak, Łukasz Wójcik, Mirosław Szala
Adv. Sci. Technol. Res. J. 2020; 14(1):201-208
DOI: https://doi.org/10.12913/22998624/116748
 

Abrasion Resistance of S235, S355, C45, AISI 304 and Hardox 500 Steels with Usage of Garnet, Corundum and Carborundum Abrasives
Mirosław Szala, Michał Szafran, Wojciech Macek, Stanislav Marchenko, Tadeusz Hejwowski
Adv. Sci. Technol. Res. J. 2019; 13(4):151-161
DOI: https://doi.org/10.12913/22998624/113244
 

Comparing of Microhardness of the Stellite 6 Cobalt Alloy Implanted with 175 keV Mn+ Ions and 120 keV N+ Ions
Mariusz Kamiński, Piotr Budzyński, Mirosław Szala, Marcin Turek
Adv. Sci. Technol. Res. J. 2019; 13(3):179-185
DOI: https://doi.org/10.12913/22998624/111965
 

Effect of Tool Kinematics on Tube Flanging by Extrusion with a Moving Sleeve
Grzegorz Winiarski, Tomasz Adam Bulzak, Łukasz Wójcik, Mirosław Szala
Adv. Sci. Technol. Res. J. 2019; 13(3):210-216
DOI: https://doi.org/10.12913/22998624/110741
 

Microstructural Characterisation of Co-Cr-Mo Casting Dental Alloys
Mirosław Szala, Karolina Beer-Lech, Kamil Gancarczyk, Onur Baran Kilic, Paweł Pędrak, Ali Özer, Anna Skic
Adv. Sci. Technol. Res. J. 2017; 11(4):76-82
DOI: https://doi.org/10.12913/22998624/80901
 

Research into Morphology and Properties of TiO2 – NiAl Atmospheric Plasma Sprayed Coating
Andrzej Maruszczyk, Agata Dudek, Mirosław Szala
Adv. Sci. Technol. Res. J. 2017; 11(3):204-210
DOI: https://doi.org/10.12913/22998624/76450
 

INFLUENCE OF REPAINTING ON THE MECHANICAL PROPERTIES, SURFACE TOPOGRAPHY AND MICROSTRUCTURE OF POLYESTER POWDER COATINGS
Mirosław Szala, Edyta Kot
Adv. Sci. Technol. Res. J. 2017; 11(2):159-165
DOI: https://doi.org/10.12913/22998624/69680
 

THE MICROSTRUCTURAL PROPERTIES OF EXPLOSION WELDED Ni/Ti JOINT
Kamila Zdrodowska, Kwiryn Wojsyk, Mirosław Szala
Adv. Sci. Technol. Res. J. 2014; 8(22):71-74
DOI: https://doi.org/10.12913/22998624.1105174
 

CAVITATION EROSION RESISTANCE OF Ni-Co BASED COATINGS
Mirosław Szala, Tadeusz Hejwowski, Iwona Lenart
Adv. Sci. Technol. Res. J. 2014; 8(21):36-42
DOI: https://doi.org/10.12913/22998624.1091876
 

A comprehensive case study to the implicit and explicit approach in finite element analysis
Umit Huner, Gürkan Irsel, Umut Bekar, Mirosław Szala
Adv. Sci. Technol. Res. J. 2025; 19(2):407-417
DOI: https://doi.org/10.12913/22998624/196987
 

The Effect of HVOF Spray Distance on Solid Particle Erosion Resistance of WC-based Cermets Bonded by Co, Co-Cr and Ni Deposited on Mg-alloy Substrate
Ewa Jonda, Leszek Łatka, Aleksandra Lont, Klaudiusz Gołombek, Mirosław Szala
Adv. Sci. Technol. Res. J. 2024; 18(2):115-128
DOI: https://doi.org/10.12913/22998624/184025
 

Abrasive Wear Mechanisms of S235JR, S355J2, C45, AISI 304, and Hardox 500 Steels Tested Using Garnet, Corundum and Carborundum Abrasives
Mirosław Szala, Michał Szafran, Jonas Matijošius, Kazimierz Drozd
Adv. Sci. Technol. Res. J. 2023; 17(2):147-160
DOI: https://doi.org/10.12913/22998624/161277
 

Microstructure and Hardness of Cold Forged 42CrMo4 Steel Hollow Component with the Outer Flange
Mirosław Szala, Grzegorz Winiarski, Tomasz Adam Bulzak, Łukasz Wójcik
Adv. Sci. Technol. Res. J. 2022; 16(4):201-210
DOI: https://doi.org/10.12913/22998624/152790
 
Journals System - logo
© 2006-2025 Journal hosting platform by Bentus
Scroll to top