PL EN
Modelling of multi-bolted connections under operational conditions using a systems-based approach
 
 
Więcej
Ukryj
1
Faculty of Mechanical Engineering and Mechatronics, West Pomeranian University of Technology in Szczecin, ul. Piastow 19, 70-310 Szczecin, Poland
 
 
Data publikacji: 14-11-2026
 
 
Autor do korespondencji
Rafał Grzejda   

Faculty of Mechanical Engineering and Mechatronics, West Pomeranian University of Technology in Szczecin, ul. Piastow 19, 70-310 Szczecin, Poland
 
 
Adv. Sci. Technol. Res. J. 2027; 21(3)
 
SŁOWA KLUCZOWE
DZIEDZINY
STRESZCZENIE
Multi-bolted connections are complex structural assemblies characterised by non-linear contact interactions between joined components. To model these assemblies efficiently, a systems-based approach is proposed, in which the connection is decomposed into four interconnected subsystems: the bolt-nut sets, the joined components, and the contact layer between them. This paper presents the mathematical formulation and experimental validation of this approach applied to a preloaded asymmetrical multi-bolted connection subjected to an external operational force inducing combined normal and shear stresses. The global system equilibrium is derived via a partitioned block stiffness matrix capturing inter-subsystem elastic couplings. The preloading phase was simulated using a three-pass tightening sequence and solved via finite element analysis in ANSYS. Numerical predictions were validated against experimental measurements on a physical test rig. The results show that the model accurately captures the elastic interactions during preloading, underestimating final bolt forces by less than 1%. Under monotonic operational loading up to 40 kN, the maximum relative error between numerical and experimental working forces remained below 1%. The proposed systems-based approach significantly reduces computational complexity whilst maintaining high accuracy, demonstrating its suitability for analysing non-linear structural connections under complex loading conditions.
Journals System - logo
Scroll to top