Analysis of correlations between processes in the real driving emissions test
Więcej
Ukryj
1
Institute of Environmental Protection – National Research Institute, ul. Słowicza 32, 02-170 Warszawa, Poland
2
Poznan University of Technology, Poznan, Poland
3
Wrocław University of Science and Technology, Wroclaw, Poland
Autor do korespondencji
Paulina Luiza Grzelak
Institute of Environmental Protection – National Research Institute, ul. Słowicza 32, 02-170 Warszawa, Poland
SŁOWA KLUCZOWE
DZIEDZINY
STRESZCZENIE
The objective of this article is to investigate the processes occurring during the RDE (real driving emissions) test. Measurements were conducted on a spark-ignition engine passenger car, recording vehicle velocity, engine controlling, engine speed and relative engine torque, as well as exhaust emission intensity, particulate number intensity, and fuel mass consumption intensity. On the basis of the recorded engine speed and relative engine torque, the relative engine power was determined.
Moreover, a comprehensive statistical analysis of the investigated processes was performed. Original results concerning their statistical characteristics are presented, including the coefficient of variation, quartile coefficient of variation, kurtosis, and skewness. Furthermore, average vehicle velocity corresponding to urban, rural, expressways, and overall RDE driving conditions were determined. For each driving areas, average specific distance exhaust emission, average specific distance of particulate number and average specific distance of mass fuel consumption were assessed.
In addition, Pearson linear correlation analysis was conducted to assess relationships among the investigated processes. The analysis was performed using standardized variables, enabling the identification of the strength and direction of dependencies between the parameters characterizing vehicle operation, fuel consumption, and pollutant emission during the RDE test.