PL EN
 
PL EN
Bieżące wydanie
O czasopiśmie
Zespół Redakcyjny
Redakcja i Wydawca
Opłaty za publikacje
Open Access
Słowo kluczowe surface topography
 

Investigation of the Surface Topography of Titanium Alloys Applied to Friction Components
Grzegorz Gawłowski, Magdalena Niemczewska-Wójcik
Adv. Sci. Technol. Res. J. 2022; 16(2):150–158
DOI: https://doi.org/10.12913/22998624/147070
 

Surface Topography of Inconel 718 Alloy in Finishing WEDM
Jarosław Buk
Adv. Sci. Technol. Res. J. 2022; 16(1):47–61
DOI: https://doi.org/10.12913/22998624/142962
 

Formation of Surface Topography During Turning of AISI 1045 Steel Considering the Type of Cutting Edge Coating
Natalia Szczotkarz, Radosław W. Maruda, Daniel Dębowski, Kamil Leksycki, Szymon Wojciechowski, Navneet Khanna, Grzegorz M. Królczyk
Adv. Sci. Technol. Res. J. 2021; 15(4):253–266
DOI: https://doi.org/10.12913/22998624/141991
 

Climatic Chamber for the Credibility Evaluation of Profilometric Measurements
Karol Grochalski, Michał Wieczorowski, Bartosz Jakubek, Paweł Pawlus
Adv. Sci. Technol. Res. J. 2020; 14(3):135–140
DOI: https://doi.org/10.12913/22998624/122298
 

The Effect of Valley Location in Two-Process Surface Topography Analysis
Przemysław Podulka
Adv. Sci. Technol. Res. J. 2018; 12(4):97–102
DOI: https://doi.org/10.12913/22998624/100343
 

GEOMETRIC STRUCTURE OF THE C45 STEEL SURFACE AFTER CENTRIFUGAL BURNISHING AND PERPENDICULAR SHOT PEENING
Agnieszka Skoczylas
Adv. Sci. Technol. Res. J. 2018; 12(2):20–28
DOI: https://doi.org/10.12913/22998624/86208
 

SELECTION OF REFERENCE PLANE BY THE LEAST SQUARES FITTING METHODS
Przemysław Podulka
Adv. Sci. Technol. Res. J. 2016; 10(30):164–175
DOI: https://doi.org/10.12913/22998624/62633
 

Surface Topography and Tribological Properties of Cutting Tool Coatings
Magdalena Niemczewska-Wójcik, Monika Madej
Adv. Sci. Technol. Res. J. 2023; 17(6):39–48
DOI: https://doi.org/10.12913/22998624/173214
 

The Effect of Vibratory Shot Peening on the Geometric Structure of the Surface of Elements Machined by Laser and Abrasive Water Jet Cutting
Agnieszka Skoczylas
Adv. Sci. Technol. Res. J. 2023; 17(5):1–11
DOI: https://doi.org/10.12913/22998624/170970
 

Evaluation of the Surface Topography of Ti6Al4V Alloy after the Finish Turning Process under Ecological Conditions
Radosław Maruda, Kamil Leksycki, Szymon Wojciechowski, Eugene Feldshtein, Andrzej Łukaszewicz
Adv. Sci. Technol. Res. J. 2023; 17(2):63–70
DOI: https://doi.org/10.12913/22998624/159801
 

Surface Texturing on a CNC Machine Tool Using a Laser
Jerzy Józwik, Krzysztof Dziedzic
Adv. Sci. Technol. Res. J. 2023; 17(1):160–172
DOI: https://doi.org/10.12913/22998624/157422
 

Strength Analysis of Lap Joints in Aerospace Structural Materials
Mariusz Kłonica, Rafał Chatys, Ilmars Blumbergs
Adv. Sci. Technol. Res. J. 2022; 16(6):147–155
DOI: https://doi.org/10.12913/22998624/156071
 
© 2006-2023 Journal hosting platform by Bentus