PL EN
 
PL EN
Bieżące wydanie
O czasopiśmie
Zespół Redakcyjny
Redakcja i Wydawca
Opłaty za publikacje
Open Access

Słowo kluczowe mechanical properties

 

Characterization of the Structural and Physical Properties of the Thermoplastic Starch Film with Kaolinite and Beeswax Addition
Karolina Julia Beer-Lech, Anna Skic, Kamil Skic, Zbigniew Stropek
Adv. Sci. Technol. Res. J. 2022; 16(5):312-323
DOI: https://doi.org/10.12913/22998624/155188
 

Mechanical Properties of Polylactide Matrix Composite Reinforced with Long Maize Stalk Fibers
Daniel Łączny, Marek Macko, Krzysztof Moraczewski
Adv. Sci. Technol. Res. J. 2022; 16(1):104-112
DOI: https://doi.org/10.12913/22998624/143551
 

Comparative Analysis of Mechanical Properties of WC-based Cermet Coatings Sprayed by HVOF onto AZ31 Magnesium Alloy Substrates
Ewa Jonda, Leszek Łatka
Adv. Sci. Technol. Res. J. 2021; 15(2):57-64
DOI: https://doi.org/10.12913/22998624/135979
 

Effect of Mechanical Properties on Wear Resistance of Si3N4 – SiC Ceramic Composite
Zuzana Gábrišová, Pavol Švec, Alena Brusilová
Adv. Sci. Technol. Res. J. 2020; 14(4):156-167
DOI: https://doi.org/10.12913/22998624/127355
 

Impact of Accelerated Aging on the Performance Characteristics of "Green" Packaging Material of Polylactide
Krzysztof Moraczewski, Alona Pawłowska, Tomasz Karasiewicz, Piotr Rytlewski
Adv. Sci. Technol. Res. J. 2020; 14(4):1-10
DOI: https://doi.org/10.12913/22998624/127167
 

The Effect of the Aging Process on Selected Properties of Polypropylene Modified by Natural Fillers
Bronisław Andrzej Samujło
Adv. Sci. Technol. Res. J. 2020; 14(4):139-147
DOI: https://doi.org/10.12913/22998624/126971
 

Characteristics of Polymer Materials with New Smart Utilities
Karolina Głogowska, Tomasz Klepka, Ludmila Dulebova
Adv. Sci. Technol. Res. J. 2020; 14(4):96-103
DOI: https://doi.org/10.12913/22998624/125581
 

The Effect of Sintering Time on Wear Resistance of Silicon Nitride
Zuzana Gábrišová, Alena Brusilová, Pavol Švec
Adv. Sci. Technol. Res. J. 2020; 14(2):145-154
DOI: https://doi.org/10.12913/22998624/118944
 

The Effect of Artificial Ageing on the Mechanical Properties of the EN AW 2017 Alloy
Klara Jirounkova, Jan Vozka, Jaromir Cais
Adv. Sci. Technol. Res. J. 2020; 14(1):75-80
DOI: https://doi.org/10.12913/22998624/113614
 

FILMS LDPE/LLDPE MADE FROM POST - CONSUMER PLASTICS: PROCESSING, STRUCTURE, MECHANICAL PROPERTIES
Dorota Czarnecka-Komorowska, Karolina Wiszumirska, Tomasz Garbacz
Adv. Sci. Technol. Res. J. 2018; 12(3):134-142
DOI: https://doi.org/10.12913/22998624/92205
 

Effect of PVP and Polybond Compatibilizers on Dynamic Properties of Polymer Blends Analyzed with DMTA
Adam Gnatowski, Marcin Sosnowski
Adv. Sci. Technol. Res. J. 2018; 12(1):36-40
DOI: https://doi.org/10.12913/22998624/85628
 

The Properties of Regenerative Polymer Mass
Anna Rudawska, Albert Wierzchowski, Miroslav Müller, Jana Petrů, Nataša Náprstková
Adv. Sci. Technol. Res. J. 2017; 11(3):130-138
DOI: https://doi.org/10.12913/22998624/71149
 

MECHANICAL PROPERTIES OF PARTS OF MEDICAL PRODUCTS PRODUCED USING ADDITIVE MANUFACTURING TECHNOLOGIES
Filip Górski, Radosław Wichniarek, Wiesław Kuczko, Marta Burdzińska, Michalina Jankowska
Adv. Sci. Technol. Res. J. 2017; 11(2):166-171
DOI: https://doi.org/10.12913/22998624/70997
 

INFLUENCE OF REPAINTING ON THE MECHANICAL PROPERTIES, SURFACE TOPOGRAPHY AND MICROSTRUCTURE OF POLYESTER POWDER COATINGS
Mirosław Szala, Edyta Kot
Adv. Sci. Technol. Res. J. 2017; 11(2):159-165
DOI: https://doi.org/10.12913/22998624/69680
 

FACTORS AFFECTING THE MECHANICAL PROPERTIES OF COMPACT BONE AND MINIATURE SPECIMEN TEST TECHNIQUES: A REVIEW
Vandana Chittibabu, Korada Santa Rao, Potnuru Govinda Rao
Adv. Sci. Technol. Res. J. 2016; 10(32):169-183
DOI: https://doi.org/10.12913/22998624/65117
 

EFFECT OF SILICON CONTENT ON MACHINABILITY OF Al-Si ALLOYS
Birol Akyüz
Adv. Sci. Technol. Res. J. 2016; 10(31):51-57
DOI: https://doi.org/10.12913/22998624/64153
 

MODELLING AND CHARACTERIZATION OF LASER WELDED INCOLOY 800 HT JOINTS
Sathiya Paulraj, Arun Kumar Srirangan
Adv. Sci. Technol. Res. J. 2016; 10(30):115-126
DOI: https://doi.org/10.12913/22998624/62734
 

RESEARCH ON THE INFLUENCE OF BLOWING AGENT ON SELECTED PROPERTIES OF EXTRUDED CELLULAR PRODUCTS
Tomasz Garbacz, Tomasz Jachowicz, Ivan Gajdoš, Grzegorz Kijewski
Adv. Sci. Technol. Res. J. 2015; 9(28):81-88
DOI: https://doi.org/10.12913/22998624/60788
 

RESEARCH OF FATIGUE AND MECHANICAL PROPERTIES AlMg1SiCu ALUMINIUM ALLOYS
Mária Mihaliková, Anna Lišková, Marek Vojtko, Tibor Kvačkaj
Adv. Sci. Technol. Res. J. 2015; 9(28):56-60
DOI: https://doi.org/10.12913/22998624/60784
 

EFFECT OF INTERMETALLIC PHASES ON CORROSION BEHAVIOR AND MECHANICAL PROPERTIES OF DUPLEX STAINLESS STEEL AND SUPER-DUPLEX STAINLESS STEEL
Prabhu Paulraj, Rajnish Garg
Adv. Sci. Technol. Res. J. 2015; 9(27):87-105
DOI: https://doi.org/10.12913/22998624/59090
 

EFFECT OF WATER ABSORPTION ON THE MECHANICAL PROPERTIES \OF FLAX FIBER REINFORCED EPOXY COMPOSITES
Umit Huner
Adv. Sci. Technol. Res. J. 2015; 9(26):1-6
DOI: https://doi.org/10.12913/22998624/2357
 

Strength Analysis Aspects of Psyllium/Thermoplastic Starch Films under Impact Loading Conditions
Karolina Beer-Lech, Paweł Kołodziej, Anna Skic, Ricardo Branco
Adv. Sci. Technol. Res. J. 2024; 18(2):385-393
DOI: https://doi.org/10.12913/22998624/185393
 

Influence of Surface Laser Treatment on Mechanical Properties and Residual Stresses of Titanium and its Alloys
Magdalena Jażdżewska, Beata Majkowska-Marzec, Roman Ostrowski, Jean-Marc Olive
Adv. Sci. Technol. Res. J. 2023; 17(6):27-38
DOI: https://doi.org/10.12913/22998624/172981
 

Investigating the Effect of Hybrid Process: MPF/SPIF on the Microstructure and Mechanical Properties of Brass (65-35) Sheet
Aqeel Sabree Bedan, Samer Jasim Algodi, Emad Ali Hussain
Adv. Sci. Technol. Res. J. 2023; 17(3):302-308
DOI: https://doi.org/10.12913/22998624/167409
 

Limitations of Short Basalt Fibers Use as an Effective Reinforcement of Polyethylene Composites in Rotational Molding Technology
Joanna Aniśko, Dawid Bartczak, Mateusz Barczewski
Adv. Sci. Technol. Res. J. 2023; 17(3):110-123
DOI: https://doi.org/10.12913/22998624/163579
 

Effect of Non-Metallic Inclusions on the Hot Ductility of High-Mn Steels
Marek Opiela, Gabriela Fojt-Dymara
Adv. Sci. Technol. Res. J. 2023; 17(3):19-30
DOI: https://doi.org/10.12913/22998624/162702
 

Comparative Evaluation of the Selected Mechanical Properties of Polymer Composites Reinforced with Glass and Hemp Fabrics
Mieczysław Scheibe, Katarzyna Bryll, Piotr Brożek, Dorota Czarnecka-Komorowska, Mariusz Sosnowski, Janusz Grabian, Tomasz Garbacz
Adv. Sci. Technol. Res. J. 2023; 17(2):268-278
DOI: https://doi.org/10.12913/22998624/161449
 

Shear-Induced Molecular Orientation of Compression Moulded PE-HD Sheets
Monika Chomiak, Józef Stabik
Adv. Sci. Technol. Res. J. 2022; 16(4):85-95
DOI: https://doi.org/10.12913/22998624/151925
 

Effect of Surface Tilt on Nanoindentation Measurement on Copper and Glass
Jarosław Borc
Adv. Sci. Technol. Res. J. 2022; 16(3):78-88
DOI: https://doi.org/10.12913/22998624/148167
 
Journals System - logo
© 2006-2024 Journal hosting platform by Bentus
Scroll to top