PL EN
 
PL EN
Bieżące wydanie
O czasopiśmie
Zespół Redakcyjny
Redakcja i Wydawca
Opłaty za publikacje
Open Access

vol. 10, 31, 2016
 
 

DESIGNING HYDRAULIC AIR CHAMBER IN WATER TRANSMISSION SYSTEMS USING GENETIC ALGORITHM
Abdorahim Jamal, Mohsen Najarchi, S. Mohammad Mehdi Najafi Zade
Adv. Sci. Technol. Res. J. 2016; 10(31):1-7
DOI: https://doi.org/10.12913/22998624/62119
 

BEHAVIOR OF HELICAL PILES – AS A GEOENVIRONMENTAL CHOICE – BY FRUSTUM CONFINING VESSEL
Javad Khazaei, Abolfazl Eslami
Adv. Sci. Technol. Res. J. 2016; 10(31):8-22
DOI: https://doi.org/10.12913/22998624/64113
 

A SCHEME FOR TEMPLATE SECURITY AT FEATURE FUSION LEVEL IN MULTIMODAL BIOMETRIC SYSTEM
Arvind Selwal, Sunil Kumar Gupta, Surender Kumar
Adv. Sci. Technol. Res. J. 2016; 10(31):23-30
DOI: https://doi.org/10.12913/22998624/64062
 

DEVELOPMENT AND IMPLEMENTATION OF HASH FUNCTION FOR GENERATING HASHED MESSAGE
Amir Ghaeedi, Erfaneh Noroozi
Adv. Sci. Technol. Res. J. 2016; 10(31):31-39
DOI: https://doi.org/10.12913/22998624/64016
 

IMPLEMENTATION OF PID ON PIC24F SERIES MICROCONTROLLER FOR SPEED CONTROL OF A DC MOTOR USING MPLAB AND PROTEUS
Sohaib Aslam, Sundas Hannan, Umar Sajjad, Waheed Zafar
Adv. Sci. Technol. Res. J. 2016; 10(31):40-50
DOI: https://doi.org/10.12913/22998624/64060
 

EFFECT OF SILICON CONTENT ON MACHINABILITY OF Al-Si ALLOYS
Birol Akyüz
Adv. Sci. Technol. Res. J. 2016; 10(31):51-57
DOI: https://doi.org/10.12913/22998624/64153
 

FATIGUE BEHAVIOR OF HOT MIX ASPHALT MODIFIED WITH NANO AL2O3 – AN EXPERIMENTAL STUDY
Amin Lotfi-Eghlim, Mohammad Saied Karimi
Adv. Sci. Technol. Res. J. 2016; 10(31):58-63
DOI: https://doi.org/10.12913/22998624/64011
 

TRANSIENT FINITE ELEMENT SIMULATION AND MICROSTRUCTURE EVOLUTION OF AA2219 WELD JOINT USING GAS TUNGSTEN ARC WELDING PROCESS
Sivaraman Arunkumar, Anup Kulkarni Shrikrishna, Sathiya Paulraj, Kandasami Devakumaran, Subramanian Ramesh Kumar
Adv. Sci. Technol. Res. J. 2016; 10(31):64-73
DOI: https://doi.org/10.12913/22998624/64007
 

EFFECT OF CURING TEMPERATURE IN THE ALKALI-ACTIVATED BLAST-FURNACE SLAG PASTE AND THEIR STRUCTURAL INFLUENCE OF POROSITY
Teresita de Jesús Medina-Serna, Susana Paola Arredondo-Rea, José Manuel Gómez-Soberón, Carlos Antonio Rosas-Casarez, Ramón Corral-Higuera
Adv. Sci. Technol. Res. J. 2016; 10(31):74-79
DOI: https://doi.org/10.12913/22998624/64021
 

PROPOSAL OF DEVICE FOR MONITORING OF EDUCATIONAL MACHINE TOOLS
Miroslav Císar, Ivan Kuric, Nadežda Čuboňová, Štefan Vlček
Adv. Sci. Technol. Res. J. 2016; 10(31):80-86
DOI: https://doi.org/10.12913/22998624/64067
 

ADHESIVE BOND OF CARBON STEEL S235J0: EFFECTS OF ALUMINIUM AND POLYMER POWDER FILLED EPOXY ADHESIVES ON MECHANICAL PROPERTIES
Miroslav Müller, Petr Valášek
Adv. Sci. Technol. Res. J. 2016; 10(31):87-93
DOI: https://doi.org/10.12913/22998624/64065
 

ANALYSIS OF DECREASE MACHINABILITY POSSIBLE CAUSES FOR CLAIMED ALLOY
Nataša Náprstková, Sylvia Kśmierczak
Adv. Sci. Technol. Res. J. 2016; 10(31):94-101
DOI: https://doi.org/10.12913/22998624/64073
 

INVESTIGATION OF COMBUSTION, PERFORMANCE AND EMISSION CHARACTERISTICS OF SPARK IGNITION ENGINE FUELLED WITH BUTHANOL – GASOLINE MIXTURE AND A HYDROGEN ENRICHED AIR
Alfredas Rimkus, Mindaugas Melaika, Jonas Matijošius, Šarūnas Mikaliūnas, Saugirdas Pukalskas
Adv. Sci. Technol. Res. J. 2016; 10(31):102-108
DOI: https://doi.org/10.12913/22998624/64071
 

THE VISUAL METHOD IN QUALITY ASSESSMENT OF SINGLE-LAP ADHESIVE JOINTS
Anna Rudawska, Dana Stančeková, Józef Brzęczek
Adv. Sci. Technol. Res. J. 2016; 10(31):109-118
DOI: https://doi.org/10.12913/22998624/64066
 

SYNTHESIS OF A PUMPING UNIT WITH CONSIDERATION OF A FLEXIBLE MEMBER IN THE SYSTEM
Alžbeta Sapietová, Michal Sekerka, Milan Vaško, Milan Sapieta
Adv. Sci. Technol. Res. J. 2016; 10(31):119-123
DOI: https://doi.org/10.12913/22998624/64069
 

TASKRADAR: TASK VISUALISATION AND MONITORING WITHIN AUTOMOTIVE PRODUCT DEVELOPMENT LIFECYCLE USING SEMANTIC TECHNOLOGIES
Selver Softic, Manfred Rosenberger, Ioan Turcin, Alexander Stocker
Adv. Sci. Technol. Res. J. 2016; 10(31):124-129
DOI: https://doi.org/10.12913/22998624/64072
 

SIMULATION OF COMPONENTS MIXING IN ORDER TO DETERMINE WORKING BODIES RATIONAL PARAMETERS
Igor Stadnyk, Tatiana Vitenko, Paweł Droździel, Andrij Derkach
Adv. Sci. Technol. Res. J. 2016; 10(31):130-138
DOI: https://doi.org/10.12913/22998624/64068
 

SURFACE INTEGRITY EVALUATION OF TURNING WITH AUTO-ROTATING TOOL
Jozef Struharnansky, Marek Kordik, Anton Martikan, Dana Stancekova, Jozef Pilc, Karol Vasilko
Adv. Sci. Technol. Res. J. 2016; 10(31):139-143
DOI: https://doi.org/10.12913/22998624/64070
 

MECHANISMS OF CUTTING BLADE WEAR AND THEIR INFLUENCE ON CUTTING ABILITY OF THE TOOL DURING MACHINING OF SPECIAL ALLOYS
Tomáš Zlámal, Jana Petrů, Ondřej Vortel, Marek Pagáč, Pavel Krajkovič
Adv. Sci. Technol. Res. J. 2016; 10(31):144-150
DOI: https://doi.org/10.12913/22998624/64074
 

AN INNOVATIVE METHOD FOR FORMING BALLS FROM SCRAP RAIL HEADS
Zbigniew Pater, Janusz Tomczak, Tomasz Bulzak
Adv. Sci. Technol. Res. J. 2016; 10(31):151-157
DOI: https://doi.org/10.12913/22998624/64005
 

THE FORMING OF MAGNESIUM ALLOY FORGINGS FOR AIRCRAFT AND AUTOMOTIVE APPLICATIONS
Anna Dziubińska, Andrzej Gontarz, Mieczysław Dziubiński, Marcin Barszcz
Adv. Sci. Technol. Res. J. 2016; 10(31):158-168
DOI: https://doi.org/10.12913/22998624/64003
 

ANALYSIS OF THE PRE-ROTATION ENGINE LOADS IN THE AUTOGYRO
Zbigniew Czyż, Tomasz Łusiak, Daniel Czyz, Dariusz Kasperek
Adv. Sci. Technol. Res. J. 2016; 10(31):169-176
DOI: https://doi.org/10.12913/22998624/64015
 

EXPERIMENTAL AND NUMERICAL ANALYSIS OF THE COMPRESSION OF A THIN-WALLED COMPOSITE PLATE
Katarzyna Falkowicz, Przemysław Mazurek, Patryk Różyło, Paweł Wysmulski, Wojciech Smagowski
Adv. Sci. Technol. Res. J. 2016; 10(31):177-184
DOI: https://doi.org/10.12913/22998624/64063
 

DIFFERENT MULTIDIMENSIONAL EXPLORATORY TECHNIQUES IN CLASSIFYING VARIABLES INTO QUALITATIVE CRITERIA OF SPARE PARTS SELECTION FOR PASSENGER CARS
Aleksander Lotko, Małgorzata Lotko, Rafał Longwic
Adv. Sci. Technol. Res. J. 2016; 10(31):185-193
DOI: https://doi.org/10.12913/22998624/64013
 

STUDY OF COATINGS OBTAINED FROM ALLOY Fe-Mn-C-B-Si-Ni-Cr
Mychajło Paszeczko, Krzysztof Dziedzic, Marcin Barszcz
Adv. Sci. Technol. Res. J. 2016; 10(31):194-198
DOI: https://doi.org/10.12913/22998624/64020
 

NUMERICAL ANALYSIS OF THE BEHAVIOR OF COMPRESSED THIN-WALLED ELEMENTS WITH HOLES
Patryk Różyło, Katarzyna Wrzesińska
Adv. Sci. Technol. Res. J. 2016; 10(31):199-206
DOI: https://doi.org/10.12913/22998624/64006
 

TECHNOLOGY OF HEAT TREATING-STRAIGHTENING OF LONG SHAFTS WITH LOW RIGIDITY
Antoni Świć, Aleksandr Draczew, Arkadiusz Gola
Adv. Sci. Technol. Res. J. 2016; 10(31):207-214
DOI: https://doi.org/10.12913/22998624/64010
 

MODAL ANALYSIS OF REAL TIMBER FRAME HOUSES WITH DIFFERENT INSULATION MATERIALS
Marcin Szczepański, Wojciech Migda, Robert Jankowski
Adv. Sci. Technol. Res. J. 2016; 10(31):215-221
DOI: https://doi.org/10.12913/22998624/64014
 

GRINDABILITY OF SELECTED GRADES OF LOW-ALLOY HIGH-SPEED STEEL
Jan Jaworski, Rafał Kluz, Tomasz Trzepieciński
Adv. Sci. Technol. Res. J. 2016; 10(31):222-228
DOI: https://doi.org/10.12913/22998624/64018
 

THE STANDARD MILLING TIME OF FLAT SURFACES WITHOUT OUTLINE RESTRICTIONS
Leszek Skoczylas, Krystyna Skoczylas, Dawid Wydrzyński
Adv. Sci. Technol. Res. J. 2016; 10(31):229-234
DOI: https://doi.org/10.12913/22998624/64061
 

A STUDY ON THE PROPERTIES OF SURFACE – ACTIVE FLUIDS USED IN BURNISHING AND SHOT PEENING PROCESSES
Kazimierz Zaleski
Adv. Sci. Technol. Res. J. 2016; 10(31):235-239
DOI: https://doi.org/10.12913/22998624/64012
 

STRUCTURAL ANALYSIS OF ARTICULAR CARTILAGE OF THE HIP JOINT USING FINITE ELEMENT METHOD
Robert Karpiński, Łukasz Jaworski, Jarosław Zubrzycki
Adv. Sci. Technol. Res. J. 2016; 10(31):240-246
DOI: https://doi.org/10.12913/22998624/64064
 

COMPARISON OF APP INVENTOR 2 AND JAVA IN CREATING PERSONAL APPLICATIONS FOR ANDROID ON EXAMPLE OF A NOTEPAD
Radosław Kowalczyk, Łukasz Turczyński, Kamil Żyła
Adv. Sci. Technol. Res. J. 2016; 10(31):247-254
DOI: https://doi.org/10.12913/22998624/64058
 

ALGORITHMS FOR TENNIS RACKET ANALYSIS BASED ON MOTION DATA
Maria Skublewska-Paszkowska, Edyta Lukasik, Jakub Smolka
Adv. Sci. Technol. Res. J. 2016; 10(31):255-262
DOI: https://doi.org/10.12913/22998624/64019
 

NAVIGATION IN LARGE-FORMAT BUILDINGS BASED ON RFID SENSORS AND QR AND AR MARKERS
Tomasz Szymczyk, Jerzy Montusiewicz, Dariusz Gutek
Adv. Sci. Technol. Res. J. 2016; 10(31):263-273
DOI: https://doi.org/10.12913/22998624/64059
 

VIDEO MATERIALS AS A MEANS OF PROMOTION AND ADVERTISING OF THE FIELDS OF STUDY
Mirosław Malec, Tomasz Cieplak, Łukasz Jarmuł
Adv. Sci. Technol. Res. J. 2016; 10(31):274-280
DOI: https://doi.org/10.12913/22998624/64389
 

THE APPLICATION OF MASSING HANDLING THEORY FOR EVALUATION OF THE APPLICATION OF WHARVES AND LOADING FACILITIES IN THE MARITIME PORT
Zbigniew Matuszak, Sylwia Bundz, Marek Jaśkiewicz, Józef Stokłosa, Paweł Posuniak
Adv. Sci. Technol. Res. J. 2016; 10(31):281-288
DOI: https://doi.org/10.12913/22998624/64017
 
Journals System - logo
© 2006-2024 Journal hosting platform by Bentus
Scroll to top