PL EN
 
PL EN
Bieżące wydanie
O czasopiśmie
Zespół Redakcyjny
Redakcja i Wydawca
Opłaty za publikacje
Open Access
vol. 8, 22, 2014
 
 

EFFECTS OF RAIN ATTENUATION ON SATELLITE COMMUNICATION LINK
G. N. Ezeh, N. S. Chukwuneke, N. C. Ogujiofor, U. H. Diala
Adv. Sci. Technol. Res. J. 2014; 8(22):1–11
DOI: https://doi.org/10.12913/22998624.1105138
 

AUTHENTICATION ARCHITECTURE USING THRESHOLD CRYPTOGRAPHY IN KERBEROS FOR MOBILE AD HOC NETWORKS
Hadj Gharib, Kamel Belloulata
Adv. Sci. Technol. Res. J. 2014; 8(22):12–18
DOI: https://doi.org/10.12913/22998624.1105141
 

COMPARISON AODV AND DSDV ROUTING PROTOCOLS WITH USING FUZZY LOGIC IN THE MANET
Hamed Jelodar, Javad Aramideh
Adv. Sci. Technol. Res. J. 2014; 8(22):19–25
DOI: https://doi.org/10.12913/22998624.1105146
 

PERIODIC SIGNAL DETECTION WITH USING DUFFING SYSTEM POINCARE MAP ANALYSIS
Valeriy Martynyuk, Mykola Fedula, Oleksii Balov
Adv. Sci. Technol. Res. J. 2014; 8(22):26–30
DOI: https://doi.org/10.12913/22998624.1105158
 

ASSESSMENT OF THE PRODUCTIBILITY OF HYBRID NODES USING THE MULTI-CRITERIA METHOD
Tomasz Urbański
Adv. Sci. Technol. Res. J. 2014; 8(22):31–36
DOI: https://doi.org/10.12913/22998624.1105160
 

ASSESSMENT OF SURFACE QUALITY FOR CHOSEN MILLING STRATEGIES WHEN PRODUCING RELIEF SURFACES
Jan Varga, Jozef Stahovec, Jozef Beno, Marek Vrabeľ
Adv. Sci. Technol. Res. J. 2014; 8(22):37–41
DOI: https://doi.org/10.12913/22998624.1105163
 

SELF-LEARNING SCORING MODELS – INTRODUCTION OF AN ON-LINE APPROACH TO RISK ASSESMENT
Ryszard Kozera, Przemyslaw Koziol
Adv. Sci. Technol. Res. J. 2014; 8(22):42–50
DOI: https://doi.org/10.12913/22998624.1105164
 

FEM SIMULATION OF THE TUBE ROLLING PROCESS IN DIESCHER’S MILL
Zbigniew Pater, Arkadiusz Tofil
Adv. Sci. Technol. Res. J. 2014; 8(22):51–55
DOI: https://doi.org/10.12913/22998624.1105165
 

DETERMINATION OF EFFECTIVE PROPERTIES OF FIBER-REINFORCED COMPOSITE LAMINATES
Andrzej Skrzat, Feliks Stachowicz
Adv. Sci. Technol. Res. J. 2014; 8(22):56–59
DOI: https://doi.org/10.12913/22998624.1105167
 

MODERNIZATION OF TECHNOLOGICAL LINE FOR CELLULAR EXTRUSION PROCESS
Tomasz Garbacz, Ludmila Dulebova, Volodymyr Krasinskyi, Lenka Markovicova
Adv. Sci. Technol. Res. J. 2014; 8(22):60–65
DOI: https://doi.org/10.12913/22998624.1105169
 

IMPACT OF VIBRATORY AND ROTATIONAL SHOT PEENING ONTO SELECTED PROPERTIES OF TITANIUM ALLOY SURFACE LAYER
Kazimierz Zaleski, Andrzej Zyśko
Adv. Sci. Technol. Res. J. 2014; 8(22):66–70
DOI: https://doi.org/10.12913/22998624.1105172
 

THE MICROSTRUCTURAL PROPERTIES OF EXPLOSION WELDED Ni/Ti JOINT
Kamila Zdrodowska, Kwiryn Wojsyk, Mirosław Szala
Adv. Sci. Technol. Res. J. 2014; 8(22):71–74
DOI: https://doi.org/10.12913/22998624.1105174
 

WIND TURBINE OPERATION PARAMETER CHARACTERISTICS AT A GIVEN WIND SPEED
Zdzisław Kamiński, Zbigniew Czyż, Mirosław Wendeker
Adv. Sci. Technol. Res. J. 2014; 8(22):75–82
DOI: https://doi.org/10.12913/22998624.1105178
 

MODERN TECHNOLOGICAL SOLUTIONS USED IN THE PRODUCTION OF BAKERY PRODUCTS WITH HIGH BIOLOGICAL VALUE
Marta Brodowska, Dominika Guzek, Agnieszka Wierzbicka
Adv. Sci. Technol. Res. J. 2014; 8(22):83–92
DOI: https://doi.org/10.12913/22998624.1105181
 
© 2006-2023 Journal hosting platform by Bentus