PL EN
 
PL EN
Bieżące wydanie
O czasopiśmie
Zespół Redakcyjny
Redakcja i Wydawca
Opłaty za publikacje
Open Access
vol. 16, 2, 2022
 
 

An Alternative Method for Synthetic Polymers Waste Processing Using the Low Temperature Pyrolysis Process
Anna Lesnau, Mirosław Tyliszczak, Krzysztof Kunda
Adv. Sci. Technol. Res. J. 2022; 16(2):1–11
DOI: https://doi.org/10.12913/22998624/146460
 

Sustainable Development of the Intelligent Industry from Industry 4.0 to Industry 5.0
Milan Majerník, Naqib Daneshjo, Peter Malega, Peter Drábik, Barbara Barilová
Adv. Sci. Technol. Res. J. 2022; 16(2):12–18
DOI: https://doi.org/10.12913/22998624/146420
 

Research on the Causes of Cracking of Pipes Derived from Recirculated Polyethylene
Bronisław Samujło, Filip Longwic, Marino Lavorgna
Adv. Sci. Technol. Res. J. 2022; 16(2):19–25
DOI: https://doi.org/10.12913/22998624/146422
 

Effect of Face Milling Parameters of Carbon Fiber Reinforced Plastics Composites on Surface Properties
Izabela Miturska-Barańska, Jerzy Józwik, Paul Bere
Adv. Sci. Technol. Res. J. 2022; 16(2):26–38
DOI: https://doi.org/10.12913/22998624/146376
 

Vibratory Shot Peening of Elements Cut with Abrasive Water Jet
Agnieszka Skoczylas
Adv. Sci. Technol. Res. J. 2022; 16(2):39–49
DOI: https://doi.org/10.12913/22998624/146272
 

Comparative Analysis of the Effect of Machining with Wire and Ceramic Brushes on Selected Properties of the Surface Layer of EN AW-7075 Aluminium Alloy
Jakub Matuszak
Adv. Sci. Technol. Res. J. 2022; 16(2):50–56
DOI: https://doi.org/10.12913/22998624/146211
 

Study on the Machinability of Glass, Carbon and Aramid Fiber Reinforced Plastics in Drilling and Secondary Drilling Operations
Krzysztof Ciecieląg
Adv. Sci. Technol. Res. J. 2022; 16(2):57–66
DOI: https://doi.org/10.12913/22998624/146079
 

Investigation of the Effect of Young’s Modulus on the Contact Strength of Metal Polymer Plain Bearings
Myron Chernets, Mykhaylo Pashechko, Anatolii Kornienko, Jarosław Borc, Roman Zakhariia
Adv. Sci. Technol. Res. J. 2022; 16(2):67–73
DOI: https://doi.org/10.12913/22998624/145964
 

An Integrated Approach of Profile Studies for Surface Water Velocity on a Steep Slope in a Rectangular Channel
Abebe Temesgen Ayalew, Abera Ermias Koshuma, Mesfin Amaru Ayele, Democracy Dilla Dirate
Adv. Sci. Technol. Res. J. 2022; 16(2):74–80
DOI: https://doi.org/10.12913/22998624/145965
 

Experimental Research on the Velocity of Two Pneumatic Drives with an Element for Concurrent Motion
Marta Żyłka, Zygmunt Szczerba, Kamil Szczerba
Adv. Sci. Technol. Res. J. 2022; 16(2):81–88
DOI: https://doi.org/10.12913/22998624/145669
 

Intelligent Visual Quality Control System Based on Convolutional Neural Networks for Holonic Shop Floor Control of Industry 4.0 Manufacturing Systems
Przemysław Oborski, Przemysław Wysocki
Adv. Sci. Technol. Res. J. 2022; 16(2):89–98
DOI: https://doi.org/10.12913/22998624/145503
 

Experimental Study of Failure Analysis in Notched and Repaired Fiberglass Epoxy Composite
Omar Hashim Hassoon, Abass Enzi, Lujain H. Kashkool
Adv. Sci. Technol. Res. J. 2022; 16(2):99–108
DOI: https://doi.org/10.12913/22998624/145309
 

Chip Temperature Measurement in the Cutting Area During Rough Milling Magnesium Alloys with a Kordell Geometry End Mill
Józef Kuczmaszewski, Ireneusz Zagórski, Piotr Zgórniak
Adv. Sci. Technol. Res. J. 2022; 16(2):109–119
DOI: https://doi.org/10.12913/22998624/146851
 

A Study on Mechanical Strength and Failure of Fabric Reinforced Polymer Composites
Izabela Korzec, Sylwester Samborski, Tomasz Łusiak
Adv. Sci. Technol. Res. J. 2022; 16(2):120–130
DOI: https://doi.org/10.12913/22998624/146686
 

2D Geometric Surface Structure ANN Modeling after Milling of the AZ91D Magnesium Alloy
Monika Kulisz, Ireneusz Zagórski, Jerzy Józwik
Adv. Sci. Technol. Res. J. 2022; 16(2):131–140
DOI: https://doi.org/10.12913/22998624/146765
 

Investigating the Effect of Sisal Fibre Content on Durability Properties of Lightweight Foamed Concrete
Md Azree Othuman Mydin
Adv. Sci. Technol. Res. J. 2022; 16(2):141–149
DOI: https://doi.org/10.12913/22998624/147065
 

Investigation of the Surface Topography of Titanium Alloys Applied to Friction Components
Grzegorz Gawłowski, Magdalena Niemczewska-Wójcik
Adv. Sci. Technol. Res. J. 2022; 16(2):150–158
DOI: https://doi.org/10.12913/22998624/147070
 

Experimental Analysis of the Post-Buckling Behaviour of Compressed Stiffened Panel with Refill Friction Stir Spot Welded and Riveted Stringers
Andrzej Kubit, Łukasz Święch, Tomasz Trzepieciński, Koen Faes
Adv. Sci. Technol. Res. J. 2022; 16(2):159–167
DOI: https://doi.org/10.12913/22998624/146899
 

Parametric Analysis on the Progression of Mechanical Properties on FSW of Aluminum-Copper Plates
Anil Kumar Deepati, Waleed Alhazmi, Waleed Zakri, Essam Shaban, Pankaj Biswas
Adv. Sci. Technol. Res. J. 2022; 16(2):168–178
DOI: https://doi.org/10.12913/22998624/147123
 

The Use of Fuzzy Evaluation and Radical Cut-Off Strategy to Improve Apictorial Puzzle Assembly with Exhaustive Search Algorithm Performance
Stanisław Piotr Skulimowski, Jerzy Montusiewicz, Marcin Badurowicz
Adv. Sci. Technol. Res. J. 2022; 16(2):179–187
DOI: https://doi.org/10.12913/22998624/147024
 

Flexure Behavior of Carbon Fiber Reinforced Polymers Retrofitted RC Beams
Muhammad Fahim, Muhammad Saeed, Haris Khan, Alam Gir, Shahid Ullah
Adv. Sci. Technol. Res. J. 2022; 16(2):188–195
DOI: https://doi.org/10.12913/22998624/147337
 

Influence of Adhesive Compound Viscosity on the Strength Properties of 1.0503 Steel Sheets Adhesive Joints
Izabela Miturska-Barańska, Anna Rudawska
Adv. Sci. Technol. Res. J. 2022; 16(2):196–205
DOI: https://doi.org/10.12913/22998624/147314
 

Cutting Forces and 3D Surface Analysis of CFRP Milling
Katarzyna Biruk-Urban, Jerzy Józwik, Paul Bere
Adv. Sci. Technol. Res. J. 2022; 16(2):206–215
DOI: https://doi.org/10.12913/22998624/147338
 

The Influence of Composite Lay-Up and the Shape of the Closed Section on the Stability of the Structure
Błażej Czajka, Patryk Różyło
Adv. Sci. Technol. Res. J. 2022; 16(2):216–224
DOI: https://doi.org/10.12913/22998624/147129
 

Study of Cross Wedge Rolling Process of BA3002-Type Railway Axle
Zbigniew Pater
Adv. Sci. Technol. Res. J. 2022; 16(2):225–231
DOI: https://doi.org/10.12913/22998624/147310
 

Effect of Water Absorption on Tribological Properties of Thermoplastics Matrix Composites Reinforced with Glass Fibres
Mariusz Walczak, Mirosław Szala, Daniel Pieniak
Adv. Sci. Technol. Res. J. 2022; 16(2):232–239
DOI: https://doi.org/10.12913/22998624/147515
 

Selected Construction Properties of Hybrid Epoxy Composites Reinforced with Carbon Fiber and Alumina
Aneta Krzyzak, Szymon Relich, Ewelina Kosicka, Robert Szczepaniak, Mateusz Mucha
Adv. Sci. Technol. Res. J. 2022; 16(2):240–248
DOI: https://doi.org/10.12913/22998624/147521
 

Numerical Simulation of the Airport Evacuation Process under Fire Conditions
Michał Jasztal, Łukasz Omen, Maciej Kowalski, Waldemar Jaskółowski
Adv. Sci. Technol. Res. J. 2022; 16(2):249–261
DOI: https://doi.org/10.12913/22998624/147280
 

Strength of Epoxy-Bonded Aluminium Alloy Joints After Sandblasting
Anna Rudawska, Magd Abdel Wahab, Miroslav Müller
Adv. Sci. Technol. Res. J. 2022; 16(2):262–279
DOI: https://doi.org/10.12913/22998624/147524
 

Structure and Properties of the S49 Rail after a Long Term Outdoor Exposure
Jarosław Konieczny, Krzysztof Labisz
Adv. Sci. Technol. Res. J. 2022; 16(2):280–290
DOI: https://doi.org/10.12913/22998624/147275
 
© 2006-2023 Journal hosting platform by Bentus