PL EN
 
PL EN
Bieżące wydanie
O czasopiśmie
Zespół Redakcyjny
Redakcja i Wydawca
Opłaty za publikacje
Open Access

vol. 15, 2, 2021
 
 

Proposal of a Method for Measuring Gas Flow in a Heating Furnace: A Simulation Study
Marcel Pástor, Milan Durdán, Ján Kačur, Marek Laciak, Patrik Flegner
Adv. Sci. Technol. Res. J. 2021; 15(2):1-12
DOI: https://doi.org/10.12913/22998624/132952
 

Effects of Hydrated Lime on Moisture Susceptibility of Asphalt Concrete
Mohammad Nour Ibrahim Al-Marafi
Adv. Sci. Technol. Res. J. 2021; 15(2):13-17
DOI: https://doi.org/10.12913/22998624/135585
 

Comparative Analysis of Physical-Mechanical Properties of Natural and Recycled Aggregate Concretes
Barbara Sadowska-Buraczewska, Justyna Kujawska
Adv. Sci. Technol. Res. J. 2021; 15(2):18-29
DOI: https://doi.org/10.12913/22998624/135931
 

Evaluation of Mechanical Properties of Lightweight Concrete with Pumice Aggregate
Malik Salman Shafiq, Fasih Ahmed Khan, Yasir Irfan Badrashi, Fayaz Ahmed Khan, Muhammad Fahim, Asim Abbas, Waqas Adil
Adv. Sci. Technol. Res. J. 2021; 15(2):30-38
DOI: https://doi.org/10.12913/22998624/135198
 

Application of Electronic Speckle Pattern Interferometry for Evaluation of the Static Stiffness of a Complex Orthopedic Implant
Piotr Mrozek, Piotr Borkowski
Adv. Sci. Technol. Res. J. 2021; 15(2):39-48
DOI: https://doi.org/10.12913/22998624/135805
 

Influence of Hole Chamfer Size on Strength of Blind Riveted Joints
Monika Lubas, Lucjan Witek
Adv. Sci. Technol. Res. J. 2021; 15(2):49-56
DOI: https://doi.org/10.12913/22998624/135632
 

Comparative Analysis of Mechanical Properties of WC-based Cermet Coatings Sprayed by HVOF onto AZ31 Magnesium Alloy Substrates
Ewa Jonda, Leszek Łatka
Adv. Sci. Technol. Res. J. 2021; 15(2):57-64
DOI: https://doi.org/10.12913/22998624/135979
 

The Influence of the Aging Process on the Change of Selected Strength Properties of Polypropylene Compositions with Mineral Fillers
Łukasz Garbacz, Tomasz Klepka, Filip Longwic
Adv. Sci. Technol. Res. J. 2021; 15(2):65-74
DOI: https://doi.org/10.12913/22998624/135512
 

Research of Nitrogen Oxides Concentrations in Exhaust Gas of Compression Ignition Engine Fuelled with Alternative Fuel
Mieczysław Sikora, Piotr Orliński, Mateusz Bednarski
Adv. Sci. Technol. Res. J. 2021; 15(2):75-83
DOI: https://doi.org/10.12913/22998624/135597
 

The Experimental Determination of the Speed of Piston Rods of Two Pneumatic Cylinders with a Synchronizing Element
Marta Izabela Żyłka
Adv. Sci. Technol. Res. J. 2021; 15(2):84-89
DOI: https://doi.org/10.12913/22998624/135596
 

Thermodynamic Analysis of Precipitation Process of MX-type Phases in High Strength Low Alloy Steels
Marek Opiela
Adv. Sci. Technol. Res. J. 2021; 15(2):90-100
DOI: https://doi.org/10.12913/22998624/135514
 

Use of Rice Husk Ash as Partial Replacement of Cement in Sandcrete Blocks
Wajid Khan, Muhammad Fahim, Saeed Zaman, Sajjad Wali Khan, Yasir Irfan Badrashi, Fayaz Khan
Adv. Sci. Technol. Res. J. 2021; 15(2):101-107
DOI: https://doi.org/10.12913/22998624/133470
 

Study of Selected Parameters of Coal Burned in a Combined Heat and Power Plant
Magdalena Paśnikowska-Łukaszuk
Adv. Sci. Technol. Res. J. 2021; 15(2):108-115
DOI: https://doi.org/10.12913/22998624/135439
 

Enhancement of Aerodynamic Efficiency of Aerofoil Using Improved Blowing and Suction System
K. Balaji, G. Jims John Wessley
Adv. Sci. Technol. Res. J. 2021; 15(2):116-126
DOI: https://doi.org/10.12913/22998624/134642
 

The Optimization of PHBV-hemp Fiber Biocomposite Manufacturing Process on the Selected Example
Wiesław Jan Frącz, Grzegorz Janowski, Łukasz Bąk
Adv. Sci. Technol. Res. J. 2021; 15(2):127-137
DOI: https://doi.org/10.12913/22998624/135399
 

Modeling of Compression Test of Natural Fiber Composite Sections
Grażyna Ryzińska, Grzegorz Janowski, Łukasz Bąk
Adv. Sci. Technol. Res. J. 2021; 15(2):138-147
DOI: https://doi.org/10.12913/22998624/133486
 

Evaluation of Milling Machine Properties Based on Shape Errors
Paweł Piórkowski, Wacław Skoczyński
Adv. Sci. Technol. Res. J. 2021; 15(2):148-155
DOI: https://doi.org/10.12913/22998624/135378
 

Analysis of the Cruciform Sample Shapes for Bi-Axial Tensile Tests Based on the Geometries Currently Presented in the Literature
Grzegorz Mitukiewicz, Cezary Kuzalski, Jaroslaw Goszczak, Jacek Leyko, Zlatina Dimitrova, Damian Batory
Adv. Sci. Technol. Res. J. 2021; 15(2):156-168
DOI: https://doi.org/10.12913/22998624/135359
 

Disinfection Properties of Conventional White LED Illumination and Their Potential Increase by Violet LEDs for Applications in Medical and Domestic Environments
Jule Buehler, Florian Sommerfeld, Tobias Meurle, Katharina Hoenes, Martin Hessling
Adv. Sci. Technol. Res. J. 2021; 15(2):169-175
DOI: https://doi.org/10.12913/22998624/134641
 

Study of Contact Pressures in Total Hip Replacement
Myron Czerniec, Jarosław Zubrzycki
Adv. Sci. Technol. Res. J. 2021; 15(2):176-183
DOI: https://doi.org/10.12913/22998624/136178
 

Selected Methods of Obtaining Adequate Forms of Deformation of Supercritical Thin-Walled Flat Plates
Tomasz Kopecki
Adv. Sci. Technol. Res. J. 2021; 15(2):184-190
DOI: https://doi.org/10.12913/22998624/134284
 

Laboratory Device Detecting the Magnitude of the Static Friction Coefficient of Brake Lining
Leopold Hrabovský, Roman Hrbáč
Adv. Sci. Technol. Res. J. 2021; 15(2):191-197
DOI: https://doi.org/10.12913/22998624/134283
 

The Influence of Geometrical Parameters of a Tool on its Wear in Selected Technological Processes
Irena Nowotyńska
Adv. Sci. Technol. Res. J. 2021; 15(2):198-207
DOI: https://doi.org/10.12913/22998624/134062
 

Optimization of a Jet Engine Compressor Disc with Application of Artificial Neural Networks for Calculations Related to Time and Mass Criteria
Rafał Kieszek, Adam Kozakiewicz, Robert Rogólski
Adv. Sci. Technol. Res. J. 2021; 15(2):208-218
DOI: https://doi.org/10.12913/22998624/134061
 

Simulation of Superfinished Surface Formation
Augustín Görög
Adv. Sci. Technol. Res. J. 2021; 15(2):219-227
DOI: https://doi.org/10.12913/22998624/133064
 

Studies on Moisture Effects on Powder Flow and Mechanochemical Improvement of Powder Flowability
Opaliński Ireneusz, Chutkowski Marcin, Stasiak Mateusz, Leś Karolina, Olechowski Marcin, Przywara Mateusz
Adv. Sci. Technol. Res. J. 2021; 15(2):228-246
DOI: https://doi.org/10.12913/22998624/135395
 

The Method of Decomposition of Architectural Objects for the preparation of 3D Virtual Models and Replication
Jerzy Montusiewicz, Marcin Barszcz, Krzysztof Dziedzic, Tomasz Nowicki
Adv. Sci. Technol. Res. J. 2021; 15(2):247-257
DOI: https://doi.org/10.12913/22998624/136396
 

Design Principles of Horizontal Drum Machines with Low Vibration
Ilona Drach, Andrii Goroshko, Renata Dwornicka
Adv. Sci. Technol. Res. J. 2021; 15(2):258-268
DOI: https://doi.org/10.12913/22998624/136441
 
Journals System - logo
© 2006-2024 Journal hosting platform by Bentus
Scroll to top