PL EN
Microstructural Characterisation of Co-Cr-Mo Casting Dental Alloys
 
Więcej
Ukryj
1
Department of Materials Engineering, Mechanical Engineering Faculty, Lublin University of Technology, 36 Nadbystrzycka Str., 20-618 Lublin, Poland
 
2
Department of Mechanical Engineering and Automation, Faculty of Production Engineering, University of Life Sciences in Lublin, Poland, Głęboka Str. 28, 20-612, Lublin, Poland
 
3
Departament of Materials Science, Faculty of Mechanical Engineering and Aeronautics, Rzeszow University of Technology, 2 Wincentego Pola Str., 35-959 Rzeszów, Poland
 
4
Cumhuriyet University, Department of Metallurgical and Materials Engineering, 58140, Sivas, Turkey
 
 
Data publikacji: 05-12-2017
 
 
Autor do korespondencji
Mirosław Szala   

Department of Materials Engineering, Mechanical Engineering Faculty, Lublin University of Technology, 36 Nadbystrzycka Str., 20-618 Lublin, Poland
 
 
Adv. Sci. Technol. Res. J. 2017; 11(4):76-82
 
SŁOWA KLUCZOWE
DZIEDZINY
 
STRESZCZENIE
The study compares the microstructure of three commercial dental cobalt matrix alloys with related chemical composition declared by the manufacturer. Casts were produced with lost wax method, then melted and casted with centrifugal induction casting machine. The Co-Cr-Mo alloys were casted according to the manufacturers procedure. The samples’ chemical composition and phase composition, respectively, using WD-XRF (Wavelength Dispersive X-Ray Fluorescence) and XRD (X-ray Diffarction) methods were analysed. Casts microstructure by mean of LOM (Light Optical Microscopy), SEM (Scanning Electron Microscopy) and EDS (Energy Dispersive X-ray Spectroscopy) were investigated. Vickers hardness HV10 was measured. Quantitative microstructure evaluation was performed by means of computer image processing. The results of the chemical composition indicate the high stability of the chemical composition for alloy A. In case of alloys B and C, there was a significant difference in carbon content. Quantitative differences in image of microstructure between of castings A and B, C were noticed. The greater amount of precipitates was recorded for castings with higher carbon content. In all investigated castings, the presence of β matrix solution and M23C6 carbide precipitations was found.
Journals System - logo
Scroll to top