PL EN
Mechanical and Thermal Stresses in an HPDC Machine Plunger During the Dosing and Filling Process
 
Więcej
Ukryj
1
Lodz University of Technology Department of Strength of Materials 1/15 Stefanowskiego str., 90-924 Łódź, Poland
2
Lodz University of Technology Department of Materials Engineering and Production Systems 1/15 Stefanowskiego str., 90-924 Łódź, Poland
AUTOR DO KORESPONDENCJI
Jacek Jankowski   

Lodz University of Technology Department of Strength of Materials 1/15 Stefanowskiego str., 90-924 Łódź, Poland
Data publikacji: 01-06-2020
 
Adv. Sci. Technol. Res. J. 2020; 14(2):1–12
 
SŁOWA KLUCZOWE
DZIEDZINY
 
STRESZCZENIE
Distributions of mechanical and thermal stresses in a plunger of the high pressure die casting machine with a horizontal shot sleeve have been considered for a flat thermal stationary problem. An axial pressure of the plunger pressing in the technological process has been accounted for as well. Principal and equivalent stresses have been determined within two different hypotheses on the strength of materials, including one theory covering various allowable stresses in tension and compression. Four plunger material variants have been analysed.