FORMING ANALYSIS OF CONTINUOSLY ANNEALED, DOUBLE REDUCED STEEL SHEETS
Więcej
Ukryj
1
Technical University of Košice, Slovak Republic
Data publikacji: 01-09-2018
Autor do korespondencji
Emil Spišák
Technical University of Košice, Technical University of Košice, Letná 9, 040 02 Košice, Slovak Republic
Adv. Sci. Technol. Res. J. 2018; 12(3):168-172
SŁOWA KLUCZOWE
DZIEDZINY
STRESZCZENIE
The paper deals with the forming analysis of continuously annealed steel sheets double reduced. Six different sheet metal grades were evaluated in the paper, thickness was in the range from 0.15 to 0.175 mm. Described are the used methods and the results obtained by a uniaxial tensile test, biaxial test (bulge test) and a springback test. Results should lead to the optimization of the test method for determining the objective mechanical properties of the sheets and thus to create the conditions for their trouble-free processing by drawing.