Computer Simulation of the Impact of Optimization of Width in the Helical Cylindrical Gear on Bearing and Durability. Part 1. Height Correction of the Gear Profile
 
 
Więcej
Ukryj
1
Institute of Information Technology Systems, Lublin University of technology, ul. Nadbystrzycka 36, 20-618 Lublin, Poland
AUTOR DO KORESPONDENCJI
Myron Czerniec   

Institute of Information Technology Systems, Lublin University of technology, ul. Nadbystrzycka 36, 20-618 Lublin, Poland
Data publikacji: 01-03-2019
 
Adv. Sci. Technol. Res. J. 2019; 13(1):52–59
SŁOWA KLUCZOWE
DZIEDZINY
 
STRESZCZENIE ARTYKUŁU
Based on the elaborated calculation method he authors method for determining the wear and durability of gears was employed to measure the maximum contact pressures, linear wear of teeth and durability of the gear with height correction of the profile. The optimal condition width in involute helical gears is indicated ensuring constant length of the line of contact between the meshing gears. As a result, it was possible to determine variations in the parameters for the optimized gear describing the meshing gears at different values of the profile correction coefficients.