PL EN
AN INNOVATIVE METHOD FOR FORMING BALLS FROM SCRAP RAIL HEADS
Zbigniew Pater 1  
,   Janusz Tomczak 1  
,   Tomasz Bulzak 1  
 
Więcej
Ukryj
1
Department of Mechanical Engineering, Lublin University of Technology, 36 Nadbystrzycka St., 20-618 Lublin, Poland
AUTOR DO KORESPONDENCJI
Zbigniew Pater   

Department of Mechanical Engineering, Lublin University of Technology, Nadbystrzycka 36, 20-618 Lublin, Poland
Data publikacji: 01-09-2016
 
Adv. Sci. Technol. Res. J. 2016; 10(31):151–157
 
SŁOWA KLUCZOWE
DZIEDZINY
 
STRESZCZENIE
The paper describes a new method for forming grinding media balls from scrap rail heads. This forming method involves the following operations: cutting the rail head to the desired length combined with lateral pressing of the produced workpiece; flashless die forging and sizing of balls in a helical impression. The proposed method was verified by numerical simulation which involved the modeling of a forming process for producing 80 mm diameter balls. As a result of the modeling, it was possible to examine the changes in the workpiece shape during each forming operation, the variations in loads and torques, as well as the distribution of temperatures enabling performing another forming operation, i.e. quenching. The results confirm that the designed method can be used to produce balls.