TY - JOUR JO - Advances in Science and Technology Research Journal J2 - Adv. Sci. Technol. Res. J. SN - 2080-4075 VL - 11 IS - 2 PY - 2017 ID - Rudawska2017 TI - THE IMPACT OF SELECTED TECHNOLOGICAL AND MATERIAL PARAMETERS ON THE STRENGTH OF ADHESIVE STEEL SHEETS JOINTS AB - The following paper analyses selected problems regarding the impact of technological parameters and type of adherend material on the strength of adhesive-bonded steel sheet joints. The subject of the test was a single-lap adhesive joint of S235JR steel sheet. Joints were formed on two types of substrates: with or without corrosion products on the surface. The surface of steel sheet adherends was pre-treated with three cleaning solutions: acetone, Wiko industrial degreasing agent and Cortanin F anti-corrosion agent, depend-ing on the state of the surface. Adhesive joints were formed with Epidian 53/ET/100:15 epoxy adhesive. The formed joints were subjected to one of three ageing variants: 14 days, two months and 3 months, which were followed by destructive testing to determine the shear strength of joints. The analysis of results ob-tained in tests indicates that the strength performance of adhesive joints of corrosion-free adherends was characterised by higher values than in corroded steel sheets, regardless of ageing time. AU - Rudawska, Anna AU - Głogowska, Katarzyna AU - Vitenko, Tetiana AU - Stančeková, Dana AU - Čuboňová, Nadežda AU - Kasperek, Dariusz SP - 8 EP - 16 DA - 2017 DO - 10.12913/22998624/67377 UR - https://doi.org/10.12913/22998624/67377 ER -