PL EN
 
PL EN
Current issue
About the Journal
Editorial Board
Editorial Office and Publisher
Article Processing Charge
Open Access

Topic Material Engineering

 

Characterization of the Structural and Physical Properties of the Thermoplastic Starch Film with Kaolinite and Beeswax Addition
Karolina Julia Beer-Lech, Anna Skic, Kamil Skic, Zbigniew Stropek
Adv. Sci. Technol. Res. J. 2022; 16(5):312-323
DOI: https://doi.org/10.12913/22998624/155188
 

Design of Metallurgical Production in the Context of Industry 4.0
Vladimír Rudy, Peter Malega, Naqib Daneshjo, Juraj Kováč
Adv. Sci. Technol. Res. J. 2022; 16(5):271-276
DOI: https://doi.org/10.12913/22998624/155036
 

Experimental Determination of the Mode I Fracture Toughness in FRP Laminates with Hybrid Delamination Interfaces
Jakub Rzeczkowski, Sylwester Samborski, Katarzyna Prokopek
Adv. Sci. Technol. Res. J. 2022; 16(5):129-135
DOI: https://doi.org/10.12913/22998624/154943
 

Time Distribution Analysis of 3D Prints with the Use of a Filament and Masked Stereolithography Resin 3D Printer
Magdalena Paśnikowska-Łukaszuk, Katarzyna Korulczyk, Kamil Kapłon, Arkadiusz Urzędowski, Magda Wlazło-Ćwiklińska
Adv. Sci. Technol. Res. J. 2022; 16(5):242-249
DOI: https://doi.org/10.12913/22998624/154926
 

Modification of Optical, Electronic and Microstructural Properties of PET by 150 keV Cs+ Irradiation
Michał Musiatowicz, Marcin Turek, Andrzej Droździel, Krzysztof Pyszniak, Wojciech Grudziński
Adv. Sci. Technol. Res. J. 2022; 16(5):11-19
DOI: https://doi.org/10.12913/22998624/154730
 

Crystal Lattice Damage and Recovery of Rare-Earth implanted Wide Bandgap Oxides
Elżbieta Guziewicz, Sarwar Mahwish, Ratajczak Renata, Ivanov Yu. Vitalij, Mishra Sushma, Turek Marcin, Wierzbicka Aleksandra, Wozniak Wojciech
Adv. Sci. Technol. Res. J. 2022; 16(5):147-154
DOI: https://doi.org/10.12913/22998624/153942
 

New Approach to Non-Volatile Metal Ion Production Using Plasma Ion Source with Internal Evaporator
Marcin Turek, Andrzej Droździel, Krzysztof Pyszniak, Janusz Filiks, Paweł Węgierek
Adv. Sci. Technol. Res. J. 2022; 16(5):20-27
DOI: https://doi.org/10.12913/22998624/152528
 

Studies on the Mechanical Properties of C45 Steel with Martensitic Structure after a High Tempering Process
Waldemar Woźniak, Michał Sąsiadek, Tomasz Jachowicz, Milan Edl, Paweł Zając
Adv. Sci. Technol. Res. J. 2022; 16(3):306-315
DOI: https://doi.org/10.12913/22998624/150564
 

Selected Construction Properties of Hybrid Epoxy Composites Reinforced with Carbon Fiber and Alumina
Aneta Krzyzak, Szymon Relich, Ewelina Kosicka, Robert Szczepaniak, Mateusz Mucha
Adv. Sci. Technol. Res. J. 2022; 16(2):240-248
DOI: https://doi.org/10.12913/22998624/147521
 

Effect of Water Absorption on Tribological Properties of Thermoplastics Matrix Composites Reinforced with Glass Fibres
Mariusz Walczak, Mirosław Szala, Daniel Pieniak
Adv. Sci. Technol. Res. J. 2022; 16(2):232-239
DOI: https://doi.org/10.12913/22998624/147515
 

Cutting Forces and 3D Surface Analysis of CFRP Milling
Katarzyna Biruk-Urban, Jerzy Józwik, Paul Bere
Adv. Sci. Technol. Res. J. 2022; 16(2):206-215
DOI: https://doi.org/10.12913/22998624/147338
 

Flexure Behavior of Carbon Fiber Reinforced Polymers Retrofitted RC Beams
Muhammad Fahim, Muhammad Saeed, Haris Khan, Alam Gir, Shahid Ullah
Adv. Sci. Technol. Res. J. 2022; 16(2):188-195
DOI: https://doi.org/10.12913/22998624/147337
 

Structure and Properties of the S49 Rail after a Long Term Outdoor Exposure
Jarosław Konieczny, Krzysztof Labisz
Adv. Sci. Technol. Res. J. 2022; 16(2):280-290
DOI: https://doi.org/10.12913/22998624/147275
 

Parametric Analysis on the Progression of Mechanical Properties on FSW of Aluminum-Copper Plates
Anil Kumar Deepati, Waleed Alhazmi, Waleed Zakri, Essam Shaban, Pankaj Biswas
Adv. Sci. Technol. Res. J. 2022; 16(2):168-178
DOI: https://doi.org/10.12913/22998624/147123
 

Investigating the Effect of Sisal Fibre Content on Durability Properties of Lightweight Foamed Concrete
Md Azree Othuman Mydin
Adv. Sci. Technol. Res. J. 2022; 16(2):141-149
DOI: https://doi.org/10.12913/22998624/147065
 

Experimental Analysis of the Post-Buckling Behaviour of Compressed Stiffened Panel with Refill Friction Stir Spot Welded and Riveted Stringers
Andrzej Kubit, Łukasz Święch, Tomasz Trzepieciński, Koen Faes
Adv. Sci. Technol. Res. J. 2022; 16(2):159-167
DOI: https://doi.org/10.12913/22998624/146899
 

2D Geometric Surface Structure ANN Modeling after Milling of the AZ91D Magnesium Alloy
Monika Kulisz, Ireneusz Zagórski, Jerzy Józwik
Adv. Sci. Technol. Res. J. 2022; 16(2):131-140
DOI: https://doi.org/10.12913/22998624/146765
 

An Alternative Method for Synthetic Polymers Waste Processing Using the Low Temperature Pyrolysis Process
Anna Lesnau, Mirosław Tyliszczak, Krzysztof Kunda
Adv. Sci. Technol. Res. J. 2022; 16(2):1-11
DOI: https://doi.org/10.12913/22998624/146460
 

Study on the Machinability of Glass, Carbon and Aramid Fiber Reinforced Plastics in Drilling and Secondary Drilling Operations
Krzysztof Ciecieląg
Adv. Sci. Technol. Res. J. 2022; 16(2):57-66
DOI: https://doi.org/10.12913/22998624/146079
 

Experimental Study of Failure Analysis in Notched and Repaired Fiberglass Epoxy Composite
Omar Hashim Hassoon, Abass Enzi, Lujain H. Kashkool
Adv. Sci. Technol. Res. J. 2022; 16(2):99-108
DOI: https://doi.org/10.12913/22998624/145309
 

Investigations of Adhesive Properties of Polyamide Modified with Friction Reducing Agents
Kamil Anasiewicz, Józef Kuczmaszewski
Adv. Sci. Technol. Res. J. 2022; 16(1):113-121
DOI: https://doi.org/10.12913/22998624/144337
 

Mechanical Properties of Polylactide Matrix Composite Reinforced with Long Maize Stalk Fibers
Daniel Łączny, Marek Macko, Krzysztof Moraczewski
Adv. Sci. Technol. Res. J. 2022; 16(1):104-112
DOI: https://doi.org/10.12913/22998624/143551
 

The Analysis of the Influence of Technological Parameters on the Grinding Temperature in the Single-Pass Grinding Process of Solid Carbide End Mill Flutes
Marcin Sałata
Adv. Sci. Technol. Res. J. 2022; 16(1):190-202
DOI: https://doi.org/10.12913/22998624/143483
 

A Comparative Study of Tribological Behavior of Moglice and Dk-6(Pt) Composites
Mykhaylo Pashechko, Аnatoliy Ishchenko, Aleksandr Radionenko, Myroslav Kindrachuk, Oleksandr Tisov
Adv. Sci. Technol. Res. J. 2022; 16(1):149-157
DOI: https://doi.org/10.12913/22998624/143482
 

Areas of Investigation into Air Intake Systems for the Impact on Compressor Performance Stability in Aircraft Turbine Engines
Mirosław Wróblewski, Maciej Adamczyk, Adam Kozakiewicz
Adv. Sci. Technol. Res. J. 2022; 16(1):62-74
DOI: https://doi.org/10.12913/22998624/143290
 

Factors Influencing Cavitation Erosion of NiCrSiB Hardfacings Deposited by Oxy-Acetylene Powder Welding on Grey Cast Iron
Mirosław Szala, Mariusz Walczak, Tadeusz Hejwowski
Adv. Sci. Technol. Res. J. 2021; 15(4):376-386
DOI: https://doi.org/10.12913/22998624/143304
 

Analysis of Mechanical Traces Left Probably by Ball Lightning
Wieslaw Z. Polak
Adv. Sci. Technol. Res. J. 2021; 15(4):182-191
DOI: https://doi.org/10.12913/22998624/142976
 

Experimental and Numerical Analysis of Post-Critical States and Damage of Thin-Walled Channel Section Columns Made of Carbon/Epoxy Composite
Hubert Dębski, Jarosław Bieniaś
Adv. Sci. Technol. Res. J. 2021; 15(4):321-331
DOI: https://doi.org/10.12913/22998624/142603
 

Impact of Intensive Mixing and Shearing Elements on the Effectiveness of Extrusion of Wood Polypropylene Composites
Karolina Głogowska, Janusz W. Sikora, Krzysztof Ludziak
Adv. Sci. Technol. Res. J. 2021; 15(4):231-242
DOI: https://doi.org/10.12913/22998624/142501
 

Effect of Plastic Deformation on CCT-Diagram of Multi-Phase Forging Steel
Anna Wojtacha, Marek Opiela
Adv. Sci. Technol. Res. J. 2021; 15(4):72-80
DOI: https://doi.org/10.12913/22998624/142473
 

The Manufacturing of Composite Materials in the Matrix of Modified Phenol-Formaldehyde Resins
Volodymyr Krasinskyi, Tomasz Jachowicz, Ludmila Dulebova, Ivan Gajdoš, Rafał Malinowski
Adv. Sci. Technol. Res. J. 2021; 15(4):267-272
DOI: https://doi.org/10.12913/22998624/142288
 

Sampling Interval Selection for 3D Surface Roughness Measurements Using the Contact Method
Wojciech Marek Żyłka
Adv. Sci. Technol. Res. J. 2021; 15(4):283-298
DOI: https://doi.org/10.12913/22998624/142192
 

Assessment of the Possibility of Using Fractal Analysis to Describe the Surface Aluminum Composites After Turning
Paweł Karolczak, Maciej Kowalski, Katarzyna Raszka
Adv. Sci. Technol. Res. J. 2021; 15(4):49-60
DOI: https://doi.org/10.12913/22998624/141935
 

Simulation of the Griffith's Crack Using Own Method of Predicting the Crack Propagation
Jerzy Podgórski, Jakub Gontarz
Adv. Sci. Technol. Res. J. 2021; 15(4):1-13
DOI: https://doi.org/10.12913/22998624/141908
 

Influence of Laser Heating on the Properties of Coated Cutting Inserts
Maciej Jan Kupczyk
Adv. Sci. Technol. Res. J. 2021; 15(4):61-71
DOI: https://doi.org/10.12913/22998624/140603
 

Using Agglomeration Techniques for Coal and Ash Waste Management in the Circular Economy
Gabriel Borowski, Sameh Alsaqoor, Ali Alahmer
Adv. Sci. Technol. Res. J. 2021; 15(3):264-276
DOI: https://doi.org/10.12913/22998624/140784
 

Wear-Fatigue Study of Carbon Steels
Tadeusz Hejwowski, Mirosław Szala
Adv. Sci. Technol. Res. J. 2021; 15(3):179-190
DOI: https://doi.org/10.12913/22998624/140200
 

Advances in Surface Engineering Using TIG Processing to Incorporate Ceramic Particulates into Low Alloy and Microalloyed Steels – A Review
Patricia Munoz-Escalona, Shahjahan Mridha, Thomas Neville Baker
Adv. Sci. Technol. Res. J. 2021; 15(3):88-98
DOI: https://doi.org/10.12913/22998624/138467
 

Intelligent Machining of Shape Memory Alloys
Kapil Gupta
Adv. Sci. Technol. Res. J. 2021; 15(3):43-53
DOI: https://doi.org/10.12913/22998624/138303
 

Influence of the Power of Various Types of Induction Furnaces on the Shape of the Metal Bath Surface
Albert Smalcerz, Bartosz Węcki, Leszek Blacha
Adv. Sci. Technol. Res. J. 2021; 15(3):34-42
DOI: https://doi.org/10.12913/22998624/138245
 

Polylactide: from Synthesis and Modification to Final Properties
Joanna Aniśko, Mateusz Barczewski
Adv. Sci. Technol. Res. J. 2021; 15(3):9-29
DOI: https://doi.org/10.12913/22998624/137960
 

Comparative Analysis of Mechanical Properties of WC-based Cermet Coatings Sprayed by HVOF onto AZ31 Magnesium Alloy Substrates
Ewa Jonda, Leszek Łatka
Adv. Sci. Technol. Res. J. 2021; 15(2):57-64
DOI: https://doi.org/10.12913/22998624/135979
 

Comparative Analysis of Physical-Mechanical Properties of Natural and Recycled Aggregate Concretes
Barbara Sadowska-Buraczewska, Justyna Kujawska
Adv. Sci. Technol. Res. J. 2021; 15(2):18-29
DOI: https://doi.org/10.12913/22998624/135931
 

Influence of Hole Chamfer Size on Strength of Blind Riveted Joints
Monika Lubas, Lucjan Witek
Adv. Sci. Technol. Res. J. 2021; 15(2):49-56
DOI: https://doi.org/10.12913/22998624/135632
 

Effects of Hydrated Lime on Moisture Susceptibility of Asphalt Concrete
Mohammad Nour Ibrahim Al-Marafi
Adv. Sci. Technol. Res. J. 2021; 15(2):13-17
DOI: https://doi.org/10.12913/22998624/135585
 

Thermodynamic Analysis of Precipitation Process of MX-type Phases in High Strength Low Alloy Steels
Marek Opiela
Adv. Sci. Technol. Res. J. 2021; 15(2):90-100
DOI: https://doi.org/10.12913/22998624/135514
 

The Influence of the Aging Process on the Change of Selected Strength Properties of Polypropylene Compositions with Mineral Fillers
Łukasz Garbacz, Tomasz Klepka, Filip Longwic
Adv. Sci. Technol. Res. J. 2021; 15(2):65-74
DOI: https://doi.org/10.12913/22998624/135512
 

Study of Selected Parameters of Coal Burned in a Combined Heat and Power Plant
Magdalena Paśnikowska-Łukaszuk
Adv. Sci. Technol. Res. J. 2021; 15(2):108-115
DOI: https://doi.org/10.12913/22998624/135439
 

Analysis of the Cruciform Sample Shapes for Bi-Axial Tensile Tests Based on the Geometries Currently Presented in the Literature
Grzegorz Mitukiewicz, Cezary Kuzalski, Jaroslaw Goszczak, Jacek Leyko, Zlatina Dimitrova, Damian Batory
Adv. Sci. Technol. Res. J. 2021; 15(2):156-168
DOI: https://doi.org/10.12913/22998624/135359
 

Evaluation of Mechanical Properties of Lightweight Concrete with Pumice Aggregate
Malik Salman Shafiq, Fasih Ahmed Khan, Yasir Irfan Badrashi, Fayaz Ahmed Khan, Muhammad Fahim, Asim Abbas, Waqas Adil
Adv. Sci. Technol. Res. J. 2021; 15(2):30-38
DOI: https://doi.org/10.12913/22998624/135198
 

Modeling of Compression Test of Natural Fiber Composite Sections
Grażyna Ryzińska, Grzegorz Janowski, Łukasz Bąk
Adv. Sci. Technol. Res. J. 2021; 15(2):138-147
DOI: https://doi.org/10.12913/22998624/133486
 

Use of Rice Husk Ash as Partial Replacement of Cement in Sandcrete Blocks
Wajid Khan, Muhammad Fahim, Saeed Zaman, Sajjad Wali Khan, Yasir Irfan Badrashi, Fayaz Khan
Adv. Sci. Technol. Res. J. 2021; 15(2):101-107
DOI: https://doi.org/10.12913/22998624/133470
 

The Coupled Eulerian-Lagrangian Analysis of the KOBO Extrusion Process
Marta Wójcik, Andrzej Skrzat
Adv. Sci. Technol. Res. J. 2021; 15(1):197-208
DOI: https://doi.org/10.12913/22998624/131663
 

Sustainable Approach for Recycling Medical Waste Needles to Partially Replace Aggregate in Lightweight Concrete Production
Lubna Kahtan Hamada, Zainab Ziad Ismail
Adv. Sci. Technol. Res. J. 2021; 15(1):166-173
DOI: https://doi.org/10.12913/22998624/131557
 

Prospective Application of Response Surface Methodology for Predicting High-Energy Mixing Process Conditions towards Fine Powders Flow Improvement
Karolina Maria Leś, Ireneusz Opaliński
Adv. Sci. Technol. Res. J. 2021; 15(1):134-143
DOI: https://doi.org/10.12913/22998624/130897
 

Numerical Simulation of the Phase Transformations in Steels: A Case Study on Newly-Developed Multi-Phase Steels for Drop Forgings
Anna Wojtacha, Marek Opiela
Adv. Sci. Technol. Res. J. 2021; 15(1):126-133
DOI: https://doi.org/10.12913/22998624/130863
 

Effect of Abiotic Degradation on the Colorimetric Analysis, Mechanical Properties and Morphology of PLA Composites with Linen Fibers
Aneta Tor-Świątek, Tomasz Garbacz
Adv. Sci. Technol. Res. J. 2021; 15(1):99-109
DOI: https://doi.org/10.12913/22998624/130792
 

Differences in Roughness Parameter Values from Skid and Skidless Contact Stylus Profilometers
Karol Grochalski, Michał Mendak, Michał Jakubowicz, Bartosz Gapiński, Natalia Swojak, Michał Wieczorowski, Aleksandra Krawczyk
Adv. Sci. Technol. Res. J. 2021; 15(1):58-70
DOI: https://doi.org/10.12913/22998624/130453
 

Mechanical Properties and Sliding Wear Resistance of Suspension Plasma Sprayed YSZ Coatings
Leszek Łatka, Mirosław Szala, Wojciech Macek, Ricardo Branco
Adv. Sci. Technol. Res. J. 2020; 14(4):307-314
DOI: https://doi.org/10.12913/22998624/128574
 

Statistical Comparison of the Hardness and Scratch-Resistance of the PMMA Polymers Used in Orthodontic Appliances
Ivo Domagała, Leszek Gil, Marcel Firlej, Daniel Pieniak, Jarosław Selech, Dawid Romek, Barbara Biedziak
Adv. Sci. Technol. Res. J. 2020; 14(4):250-261
DOI: https://doi.org/10.12913/22998624/127437
 

Effect of Mechanical Properties on Wear Resistance of Si3N4 – SiC Ceramic Composite
Zuzana Gábrišová, Pavol Švec, Alena Brusilová
Adv. Sci. Technol. Res. J. 2020; 14(4):156-167
DOI: https://doi.org/10.12913/22998624/127355
 

Impact of Accelerated Aging on the Performance Characteristics of "Green" Packaging Material of Polylactide
Krzysztof Moraczewski, Alona Pawłowska, Tomasz Karasiewicz, Piotr Rytlewski
Adv. Sci. Technol. Res. J. 2020; 14(4):1-10
DOI: https://doi.org/10.12913/22998624/127167
 

Influence of the Length of Components From Polymer Composite on Selected Machinability Indicators in the Circumferential Milling Process
Krzysztof Ciecieląg
Adv. Sci. Technol. Res. J. 2020; 14(4):229-239
DOI: https://doi.org/10.12913/22998624/127010
 

The Effect of the Aging Process on Selected Properties of Polypropylene Modified by Natural Fillers
Bronisław Andrzej Samujło
Adv. Sci. Technol. Res. J. 2020; 14(4):139-147
DOI: https://doi.org/10.12913/22998624/126971
 

Temperature Measurement of Modern Cutting Tools During Turning
Karol Grochalski, Piotr Jabłoński, Rafał Talar, Paweł Twardowski, Michał Wieczorowski, Bartosz Jakubek, Wojciech Rukat
Adv. Sci. Technol. Res. J. 2020; 14(4):37-48
DOI: https://doi.org/10.12913/22998624/123007
 

The Impact of Material Selection on Durability of Exhaust Valve Faces of a Ship Engine – A Case Study
Sylwia Bazychowska, Hanna Smoleńska, Włodzimierz Kończewicz
Adv. Sci. Technol. Res. J. 2020; 14(3):165-174
DOI: https://doi.org/10.12913/22998624/124074
 

Influence of the Amplitude of Resonance Vibrations on Fatigue Life of a Compressor Blade with Simulated FOD Damage
Arkadiusz Stefan Bednarz
Adv. Sci. Technol. Res. J. 2020; 14(3):22-29
DOI: https://doi.org/10.12913/22998624/122485
 

Nanocomposites Based on Polyamide and Montmorillonite Obtained from a Solution
Volodymyr Krasinskyi, Oleh Suberlyak, Viktoria Kochubei, Tomasz Jachowicz, Ludmila Dulebova, Viktoria Zemke
Adv. Sci. Technol. Res. J. 2020; 14(3):192-198
DOI: https://doi.org/10.12913/22998624/122297
 

The Effect of Sintering Time on Wear Resistance of Silicon Nitride
Zuzana Gábrišová, Alena Brusilová, Pavol Švec
Adv. Sci. Technol. Res. J. 2020; 14(2):145-154
DOI: https://doi.org/10.12913/22998624/118944
 

Concrete Capillarity under Different Curing Conditions Produced in Kurdistan-Iraq
Bengin Herki
Adv. Sci. Technol. Res. J. 2020; 14(2):131-139
DOI: https://doi.org/10.12913/22998624/118942
 

Indentation Hardness and Tribological Wear in Conditions of Sliding Friction of the Surface Layer of Composites Based on Methacrylate Resins with Ceramic Nanofiller
Daniel Pieniak, Konrad Gauda
Adv. Sci. Technol. Res. J. 2020; 14(2):112-119
DOI: https://doi.org/10.12913/22998624/118867
 

Effect of Test Velocity on the Energy Absorption Under Progressive Crushing of Composite Tubes
Grażyna Ryzińska, Roman Gieleta
Adv. Sci. Technol. Res. J. 2020; 14(2):94-102
DOI: https://doi.org/10.12913/22998624/118551
 

The Effects of Hot Deformation Parameters on the Size of Dynamically Recrystallised Austenite Grains of HSLA Steel
Sebastian Gnapowski, Marek Opiela, Elżbieta Kalinowska-Ozgowicz, Joanna Szulżyk-Cieplak
Adv. Sci. Technol. Res. J. 2020; 14(2):76-84
DOI: https://doi.org/10.12913/22998624/118255
 

Study of the Performance of Natural Fiber Reinforced Composites for Wind Turbine Blade Applications
Temesgen Batu, Hirpa G. Lemu, Belete Sirhabizuh
Adv. Sci. Technol. Res. J. 2020; 14(2):67-75
DOI: https://doi.org/10.12913/22998624/118201
 

The Effect of Modifier on the Microstructure of the AlSi10CuNiMn Alloy
Jaromir Cais, Jiri Heinrich, Klara Jirounkova
Adv. Sci. Technol. Res. J. 2020; 14(2):13-18
DOI: https://doi.org/10.12913/22998624/113618
 

Specific Cutting Conditions of 100Cr6 Steel Grinding and Selected Final Roughness Parameters
Nataša Náprstková, Martin Novák, Jan Sviantek
Adv. Sci. Technol. Res. J. 2020; 14(2):184-189
DOI: https://doi.org/10.12913/22998624/113281
 

Evaluation of Material Data to the Numerical Strain-Life Analysis of the Compressor Blade Subjected to Resonance Vibrations
Arkadiusz Stefan Bednarz
Adv. Sci. Technol. Res. J. 2020; 14(1):184-190
DOI: https://doi.org/10.12913/22998624/117115
 

Development of Ammunition with Unconventional Applications
Olgierd Janusz Goroch, Gulbinowicz Zbigniew, Cybula Leszek
Adv. Sci. Technol. Res. J. 2020; 14(1):137-144
DOI: https://doi.org/10.12913/22998624/115515
 

Numerical Modeling of Superplastic Punchless Deep Drawing Process of a Ti-6Al-4V Titanium Alloy
Marta Wójcik, Andrzej Skrzat
Adv. Sci. Technol. Res. J. 2020; 14(1):127-136
DOI: https://doi.org/10.12913/22998624/114029
 

Experimental Investigation of Cutting Forces in High-Feed Milling of Titanium Alloy
Jana Petrů, Lukáš Drábek, Jiří Hajnyš, Dalibor Jurok, Marek Pagáč, Jakub Měsíček
Adv. Sci. Technol. Res. J. 2020; 14(1):89-95
DOI: https://doi.org/10.12913/22998624/113615
 

Realization and Verification of Data Conversion from Laser Scanner to FEM
Alžbeta Sapietová, Ondrej Štalmach, Milan Sága, Dana Stančeková, Lukáš Gajdoš
Adv. Sci. Technol. Res. J. 2020; 14(1):69-74
DOI: https://doi.org/10.12913/22998624/113285
 

An Optimization Study for Bridge Design of a Porthole Extrusion Die
Önder Ayer, Burcu Gizem Özmen, İsmail Karakaya
Adv. Sci. Technol. Res. J. 2019; 13(4):270-275
DOI: https://doi.org/10.12913/22998624/115109
 

Effect of Nature and Amount of Polypropylene Composite Filler on the Productivity of Extruder with the Cylinder Equipped with Grooves
Volodymyr Krasinskyi, Volodymyr Moravskyi, Oleh Suberlyak, Janusz Sikora, Tomasz Jachowicz
Adv. Sci. Technol. Res. J. 2019; 13(4):264-269
DOI: https://doi.org/10.12913/22998624/114960
 

Abrasion Resistance of S235, S355, C45, AISI 304 and Hardox 500 Steels with Usage of Garnet, Corundum and Carborundum Abrasives
Mirosław Szala, Michał Szafran, Wojciech Macek, Stanislav Marchenko, Tadeusz Hejwowski
Adv. Sci. Technol. Res. J. 2019; 13(4):151-161
DOI: https://doi.org/10.12913/22998624/113244
 

Soft-Sensing in Batch Annealing Based on Finite Differential Method and Support Vector Regression
Ján Kačur, Milan Durdán, Marek Laciak, Patrik Flegner
Adv. Sci. Technol. Res. J. 2019; 13(4):70-86
DOI: https://doi.org/10.12913/22998624/112542
 

Creating the Structure and Properties of 7075 Alloy Casts by Thermal and Forming Processes
Krzysztof Majerski, Anna Dziubińska, Grzegorz Winiarski, Michał Szucki, Krzysztof Drozdowski
Adv. Sci. Technol. Res. J. 2019; 13(4):15-21
DOI: https://doi.org/10.12913/22998624/112361
 

The Effect of Ageing on Selected Properties of Polylactide Modified with Blowing Agents
Karolina Głogowska, Łukasz Majewski, Tomasz Garbacz, Aneta Tor-Świątek
Adv. Sci. Technol. Res. J. 2019; 13(4):204-213
DOI: https://doi.org/10.12913/22998624/112025
 

Robust Diagnosis of a Proton Exchange Membrane Fuel Cell Using Bond Graph Methodlogy – Physical and Electrical Faults Detection and Isolation
Abderrahmene Sallami, Dhia Mzoughi, Abdelkader Mami
Adv. Sci. Technol. Res. J. 2019; 13(4):194-203
DOI: https://doi.org/10.12913/22998624/111704
 

Identifying Optimal FSW Process Parameters for 2024 Al Alloy Butt Joints
Rafał Kluz, Magdalena Bucior, Andrzej Kubit
Adv. Sci. Technol. Res. J. 2019; 13(4):48-53
DOI: https://doi.org/10.12913/22998624/110740
 

Failure Analysis of Thin-Walled Composite Profile Subjected to Axial Compression
Patryk Różyło
Adv. Sci. Technol. Res. J. 2019; 13(3):170-178
DOI: https://doi.org/10.12913/22998624/111967
 

Fretting-Wear Mechanism of Textured Surfaces
Mykhaylo Pashechko, Volodymyr Marchuk, Myroslav Kindrachuk, Oleksandr Tisov, Anatolii Kornienko, Oleksandr Dukhota
Adv. Sci. Technol. Res. J. 2019; 13(3):186-191
DOI: https://doi.org/10.12913/22998624/111966
 

Comparing of Microhardness of the Stellite 6 Cobalt Alloy Implanted with 175 keV Mn+ Ions and 120 keV N+ Ions
Mariusz Kamiński, Piotr Budzyński, Mirosław Szala, Marcin Turek
Adv. Sci. Technol. Res. J. 2019; 13(3):179-185
DOI: https://doi.org/10.12913/22998624/111965
 

Metallographic Comparison of Copper and Brass Plasma Reactor Electrodes After a Month of Operation
Sebastian Gnapowski, Pietraszek Aleksandra, Elżbieta Kalinowska-Ozgowicz
Adv. Sci. Technol. Res. J. 2019; 13(3):201-209
DOI: https://doi.org/10.12913/22998624/111781
 

Effect of Natural Aging and Fatigue Crack Propagation Rate on Welded and Non-Welded Aluminum Alloy (AA2219˗T87)
Mudasir Ijaz, Faisal Qayyum, Hassan Elahi, Mudaser Ullah, Marco Eugeni, Saeed Badshah, Paolo Gaudenzi
Adv. Sci. Technol. Res. J. 2019; 13(3):129-143
DOI: https://doi.org/10.12913/22998624/110737
 

Experimental Research of the Weakening of the fFuselage Skin by RFSSW Single Row Joints
Andrzej Kubit, Magdalena Bucior, Rafał Kluz, Wojciech Bochnowski, Ryszard Perłowski
Adv. Sci. Technol. Res. J. 2019; 13(3):90-97
DOI: https://doi.org/10.12913/22998624/110373
 

Investigation of Electrical Properties for Cantilever-Based Piezoelectric Energy Harvester
Ahsan Ali, Riffat Asim Pasha, Muhammad Abdullah Sheeraz, Zubair Butt, Hassan Elahi, Afzaal Ahmed Khan
Adv. Sci. Technol. Res. J. 2019; 13(3):76-85
DOI: https://doi.org/10.12913/22998624/110175
 

Plastic Deformation, Mechanical and Adhesive Properties of Bio-Plastic Material
Hamdi Abdulhamid Raghs
Adv. Sci. Technol. Res. J. 2019; 13(3):1-15
DOI: https://doi.org/10.12913/22998624/109790
 

Statistical Analyses of Productivity Model Parameters for Process Improvement
Zahid Hussain
Adv. Sci. Technol. Res. J. 2019; 13(2):157-167
DOI: https://doi.org/10.12913/22998624/106240
 

Features of Formation Stress State of Amorphized Detonation Coatings of the Zr-Al-B Systems
Mykhaylo Pashechko, Olena Kharchenk, Vitaliy Shchepetov, Klaudiusz Lenik, Yaroslav Gladkiy
Adv. Sci. Technol. Res. J. 2019; 13(2):46-50
DOI: https://doi.org/10.12913/22998624/106161
 

Response Surface Analysis of the Compressive Strength of Self-Compacting Concrete Incorporating Metakaolin
Ayobami Adebola Busari, Bamidele Dahunsi, Joseph Akinmusuru, Tolulope Loto, Samuel Ajayi
Adv. Sci. Technol. Res. J. 2019; 13(2):7-13
DOI: https://doi.org/10.12913/22998624/105608
 

Experimental Study on Static and Dynamic Fracture Toughness of Cured Epoxy Resins
Jakub Skoczylas, Sylwester Samborski, Mariusz Kłonica
Adv. Sci. Technol. Res. J. 2019; 13(1):122-127
DOI: https://doi.org/10.12913/22998624/104702
 

Stability Problems of Comperssed Thin-Walled Structures
Hubert Dębski
Adv. Sci. Technol. Res. J. 2018; 12(4):190-198
DOI: https://doi.org/10.12913/22998624/100441
 

The Problem of Material Fracture Prediction in Cross Rolling Processes
Zbigniew Pater, Janusz Tomczak, Tomasz Adam Bulzak, Andrzej Zniszczyński
Adv. Sci. Technol. Res. J. 2018; 12(4):184-189
DOI: https://doi.org/10.12913/22998624/100398
 

Experience of the Crane Steel Wire Ropes Non-Destructive Tests
Pavel Peterka, Jozef Krešák, Marek Vojtko
Adv. Sci. Technol. Res. J. 2018; 12(4):157-163
DOI: https://doi.org/10.12913/22998624/100350
 

Unconventional Materials from Sewage Sludge with a Potential Application in a Road Construction
Marta Wójcik, Łukasz Bąk, Feliks Stachowicz
Adv. Sci. Technol. Res. J. 2018; 12(4):65-75
DOI: https://doi.org/10.12913/22998624/99991
 

Evaluation of the Damage Initiation of a Composite Thin-Walled Structure, on the Example of the ADUSTER Gyroplane Undercarriage
Karol Szklarek, Patryk Różyło
Adv. Sci. Technol. Res. J. 2018; 12(4):48-55
DOI: https://doi.org/10.12913/22998624/99986
 

Analysis of the Change in Thickness of the Thin Double Reduced Steel Sheets by Drawing of Cups
Janka Majerníková, Emil Spišák, Ľuboš Kaščák, Ján Slota
Adv. Sci. Technol. Res. J. 2018; 12(4):28-34
DOI: https://doi.org/10.12913/22998624/95009
 

THE INFLUENCE OF AUXILARY SUPPLEMENTS ADDED IN THE EXTRUSION PROCESS TO REDUCE THE FRICTION OF A POLYMERIC FOIL
Sebastian Białasz
Adv. Sci. Technol. Res. J. 2018; 12(3):250-256
DOI: https://doi.org/10.12913/22998624/95178
 

INVESTIGATION OF THE DEFORMABILITY OF ALUMINIUM-COPPER CASTING ALLOYS
Grzegorz Winiarski, Anna Dziubińska, Krzysztof Majerski, Michał Szucki, Krzysztof Drozdowski
Adv. Sci. Technol. Res. J. 2018; 12(3):242-249
DOI: https://doi.org/10.12913/22998624/95056
 

FORMING ANALYSIS OF CONTINUOSLY ANNEALED, DOUBLE REDUCED STEEL SHEETS
Emil Spišák, Janka Majerníková, Peter Mulidran, Ľuboš Kaščák, Ján Slota
Adv. Sci. Technol. Res. J. 2018; 12(3):168-172
DOI: https://doi.org/10.12913/22998624/94967
 

OPTIMIZATION OF DOSING TANK EMPTYING USING SPIRAL VIBRATION
David Zurovec, Jan Necas, Jan Diviš, Jakub Hlosta, Jiri Zegzulka, Katerina Urbanova
Adv. Sci. Technol. Res. J. 2018; 12(3):143-149
DOI: https://doi.org/10.12913/22998624/94962
 

NUMERICAL ANALYSIS OF THE EFFECT OF NONMETALLIC INCLUSIONS LOCATION IN CARBURIZED LAYER OF 16MnCr5 STEEL ON INITIATION OF FATIGUE CRACKING
Sebastian Lipa
Adv. Sci. Technol. Res. J. 2018; 12(3):66-74
DOI: https://doi.org/10.12913/22998624/94943
 

DETERMINATION OF DIFFERENT OPTICAL PROPERTIES FOR CUBIC TITANIUM DIOXIDE: AN AB – INITIO APPROACH
Debashish Dash, Chandan Kumar Pandey, Saurabh Chaudhury, Susanta Kumar Tripathy
Adv. Sci. Technol. Res. J. 2018; 12(3):223-232
DOI: https://doi.org/10.12913/22998624/94942
 

FILMS LDPE/LLDPE MADE FROM POST - CONSUMER PLASTICS: PROCESSING, STRUCTURE, MECHANICAL PROPERTIES
Dorota Czarnecka-Komorowska, Karolina Wiszumirska, Tomasz Garbacz
Adv. Sci. Technol. Res. J. 2018; 12(3):134-142
DOI: https://doi.org/10.12913/22998624/92205
 

OUT-OF-PLANE STATIC CRUSHING OF THIN-WALLED HONEYCOMB STRUCTURES. NU-MERICAL AND EXPERIMENTAL INVESTIGATION.
Radosław Ciepielewski, Paweł Dybcio, Wiesław Barnat
Adv. Sci. Technol. Res. J. 2018; 12(3):96-105
DOI: https://doi.org/10.12913/22998624/92176
 

ANALYSES OF CALCIUM INFLUENCE ON THE AlSi9CuMnNi ALLOY
Nataša Náprstková, Pavel Kraus, Jaromír Cais, Dana Stančeková, Izabela Miturska
Adv. Sci. Technol. Res. J. 2018; 12(3):32-38
DOI: https://doi.org/10.12913/22998624/92101
 

THE INFLUENCE OF SELECTED FACTORS ON THE STRENGHT OF WOOD ADHESIVE JOINTS
Anna Rudawska, Marek Maziarz, Michał Šajgalík, Petr Valášek, Tomas Zlamal, Volodymyr Iasnii
Adv. Sci. Technol. Res. J. 2018; 12(3):47-54
DOI: https://doi.org/10.12913/22998624/92099
 

A CHOICE OF THE OPTIMUM CUTTING RANGES FOR CUTTING NOZZLES A-SD FOR SELECTION OF METALLURGICAL MATERIAL
Dana Stančeková, Anna Rudawska, Albert Kulla, Jana Petrů, Jozef Holubják
Adv. Sci. Technol. Res. J. 2018; 12(3):106-113
DOI: https://doi.org/10.12913/22998624/92095
 

REGRESSION MODEL CHANGE OF NORMAL CONTACT FORCES IN HEXAGONAL IDLER HOUSING FOR PIPE CONVEYOR LOADED WITH TRANSPORTED MATERIAL
Vieroslav Molnar, Beáta Stehlíková
Adv. Sci. Technol. Res. J. 2018; 12(2):244-251
DOI: https://doi.org/10.12913/22998624/92342
 

THE CAUSES OF THE DAMAGE TO THE BEARING ROPE – THE FAILUREANALYSIS
Pavel Peterka, Jozef Krešák
Adv. Sci. Technol. Res. J. 2018; 12(2):231-236
DOI: https://doi.org/10.12913/22998624/92341
 

STUDY OF THE EFFECT OF THE ELECTROLESS Ni-P COATING THICKNESS APPLIED ON AW-7075 ALUMINUM ALLOY ON ITS MECHANICAL PROPERTIES
Kazimierz Czapczyk, Piotr Siwak, Stanisław Legutko
Adv. Sci. Technol. Res. J. 2018; 12(2):291-297
DOI: https://doi.org/10.12913/22998624/92097
 

MECHANICAL PROPERTIES OF HAND-MAKING POLYESTER COMPOSITES
Anna Rudawska, Mateusz Malczarski, Dana Stančeková, Magd Abdel Wahab, Vladimira Schindlerová
Adv. Sci. Technol. Res. J. 2018; 12(2):112-120
DOI: https://doi.org/10.12913/22998624/91891
 

SURFACE MICROHARDENING STUDIES ON STEELS AFTER HIGH FEED MILLING
Jana Petrů, Tomáš Zlámal, František Špalek, Robert Čep
Adv. Sci. Technol. Res. J. 2018; 12(2):222-230
DOI: https://doi.org/10.12913/22998624/91888
 

EFFECT OF SMALL ADDITIVES OF POLYAMIDE MODIFIED BY POLYVINYLPYRROLIDONE AND MONTMORILLONITE ON POLYPROPYLENE TECHNOLOGICAL PROPERTIES AND HEAT RESISTANCE
Volodymyr Krasinskyi, Oleh Suberlyak, Viktoria Kochubei, Yurii Klym, Viktoria Zemke, Tomasz Jachowicz
Adv. Sci. Technol. Res. J. 2018; 12(2):83-88
DOI: https://doi.org/10.12913/22998624/90924
 

INVESTIGATION ON FLEXURAL BEHAVIORS OF I-SHAPED JOINTED COMPOSITE PLATES
Gurkan Altan
Adv. Sci. Technol. Res. J. 2018; 12(2):65-70
DOI: https://doi.org/10.12913/22998624/89756
 

PRELIMINARY ANALYSIS OF A ROTARY COMPRESSION TEST
Zbigniew Pater, Patrycja Walczuk, Konrad Lis, Łukasz Wójcik
Adv. Sci. Technol. Res. J. 2018; 12(2):77-82
DOI: https://doi.org/10.12913/22998624/86812
 

NUMERICAL ANALYSIS OF THE POSTBUCKLING OF THIN-WALLED COMPOSITE STRUCTURE WITH Z-PROFILE CROSS SECTION
Patryk Różyło
Adv. Sci. Technol. Res. J. 2018; 12(2):52-58
DOI: https://doi.org/10.12913/22998624/79829
 

GRADIENT COMPOSITE COATINGS FOR WORKING SURFACES OF BRAKING DEVICES
Mykhaylo Pashechko, Myroslav Kindrachuk, Ihor Humeniuk, Taras Berezhanskyi
Adv. Sci. Technol. Res. J. 2018; 12(2):1-5
DOI: https://doi.org/10.12913/22998624/70759
 

Selected Strength Aspects of Adhesive Lap Joints and Butt Welded Joints of Various Structural Materials
Izabela Miturska, Anna Rudawska, Paweł Niedziałkowski, Jakub Szabelski, Dominik Grzesiczak
Adv. Sci. Technol. Res. J. 2018; 12(1):135-141
DOI: https://doi.org/10.12913/22998624/86258
 

The Influence of Microstructure of Arc Sprayed Coatings on Wear Resistance
Daniel Tomasz Majewski, Tadeusz Hejwowski, Daniel Łukasik
Adv. Sci. Technol. Res. J. 2018; 12(1):285-292
DOI: https://doi.org/10.12913/22998624/86210
 

Application of MCDA in Selection of Different Mining Methods and Solutions
Dejan Stevanović, Milena Lekić, Daniel Krzanovic, Ivica Ristović
Adv. Sci. Technol. Res. J. 2018; 12(1):171-180
DOI: https://doi.org/10.12913/22998624/85804
 

Operational Properties of Anti-graffiti Coating Systems for Rolling Stock
Łukasz Pasieczyński, Jolanta Radziszewska-Wolińska, Norbert Radek
Adv. Sci. Technol. Res. J. 2018; 12(1):127-134
DOI: https://doi.org/10.12913/22998624/85705
 

The Evaluation of Properties of Mechanically Clinched Joints Made of Ferrous and Non-Ferrous Materials
Ľuboš Kaščák, Emil Spišák, René Kubík, Janka Majerníková
Adv. Sci. Technol. Res. J. 2018; 12(1):162-170
DOI: https://doi.org/10.12913/22998624/85659
 

Effect of PVP and Polybond Compatibilizers on Dynamic Properties of Polymer Blends Analyzed with DMTA
Adam Gnatowski, Marcin Sosnowski
Adv. Sci. Technol. Res. J. 2018; 12(1):36-40
DOI: https://doi.org/10.12913/22998624/85628
 

State of Residual Stresses After the Process of Milling Selected Aluminium Alloys
Józef Kuczmaszewski, Waldemar Łogin, Paweł Pieśko, Ireneusz Zagórski
Adv. Sci. Technol. Res. J. 2018; 12(1):63-73
DOI: https://doi.org/10.12913/22998624/81768
 

Synthesis and Activity Evaluation of Ce-Mn-Cu Mixed Oxide Catalyst for Selective Oxidation of CO in Automobile Engine Exhaust: Effect of Ce/Mn Loading Content on Catalytic Activity
Yasir Bilal, Muhammad Ali Nasir, Sadia Nasreen, Niaz Ahmed Akhter, Riffat Asim Pasha, Muhammad Farhan Noor
Adv. Sci. Technol. Res. J. 2018; 12(1):260-266
DOI: https://doi.org/10.12913/22998624/81190
 

Tribological Properties of Stellite 6 Cobalt Alloy Implanted with Nitrogen Ions Determined in the Tests Conducted in Engine Fuel Atmosphere
Mariusz Kamiński, Piotr Budzyński
Adv. Sci. Technol. Res. J. 2017; 11(4):215-219
DOI: https://doi.org/10.12913/22998624/80924
 

Microstructural Characterisation of Co-Cr-Mo Casting Dental Alloys
Mirosław Szala, Karolina Beer-Lech, Kamil Gancarczyk, Onur Baran Kilic, Paweł Pędrak, Ali Özer, Anna Skic
Adv. Sci. Technol. Res. J. 2017; 11(4):76-82
DOI: https://doi.org/10.12913/22998624/80901
 

Measurement of Hydrogen Storage Capacity in Ca72Mg28 Alloy
Tomáš Brestovič, Natália Jasminská, Marián Lázár, Karel Saksl, Ľubica Bednárová, Michaela Šulíková, Mária Čarnogurská
Adv. Sci. Technol. Res. J. 2017; 11(4):103-110
DOI: https://doi.org/10.12913/22998624/80871
 

Influence of Polylactide Modification with Blowing Agents on Selected Mechanical Properties
Aneta Tor-Świątek, Tomasz Garbacz, Vladimir Sedlarik, Petr Stloukal, Pavel Kucharczyk
Adv. Sci. Technol. Res. J. 2017; 11(4):206-214
DOI: https://doi.org/10.12913/22998624/80850
 

Possibilities of Belzona Adhesive Joints Application for Austenitic Steel Used in Ship Constructions
Wojciech Jurczak, Kamil Jurczak
Adv. Sci. Technol. Res. J. 2017; 11(4):134-140
DOI: https://doi.org/10.12913/22998624/80842
 

Design and Effectiveness Verification of Sound Reduction Measures in Production Hall
Marek Moravec, Pavol Liptai, Tibor Dzuro, Miroslav Badida
Adv. Sci. Technol. Res. J. 2017; 11(4):220-224
DOI: https://doi.org/10.12913/22998624/80310
 

Fretting Wear Analysis of Different Tube Materials Used in Heat Exchanger Tube Bundle
Tasawar Abbas, Shahab Khushnood, Luqman Ahmad Nizam, Muhammad Usman
Adv. Sci. Technol. Res. J. 2017; 11(4):123-133
DOI: https://doi.org/10.12913/22998624/80309
 

Increasing of Durability of Cutting Tools
Emil Spišák, Janka Majernikova
Adv. Sci. Technol. Res. J. 2017; 11(4):141-146
DOI: https://doi.org/10.12913/22998624/78168
 

Comparative Analysis of Welded and Adhesive Joints Strength Made of Acid-Resistant Stainless Steel Sheets
Izabela Miturska, Anna Rudawska, Piotr Pawlak, Dana Stančeková, Mateusz Chyra
Adv. Sci. Technol. Res. J. 2017; 11(4):97-102
DOI: https://doi.org/10.12913/22998624/78165
 

Rotary Friction Welding of Weight Heavy Alloy with Wrought AlMg3 Alloy for Subcaliber Ammunition
Olgierd Janusz Goroch, Zbigniew Gulbinowicz
Adv. Sci. Technol. Res. J. 2017; 11(4):111-122
DOI: https://doi.org/10.12913/22998624/76857
 

Investigation of the Effect of Forging Temperature on the Microstructure of Grade 5 Titanium ELI
Anna Dziubińska, Krzysztof Majerski, Grzegorz Winiarski
Adv. Sci. Technol. Res. J. 2017; 11(4):147-158
DOI: https://doi.org/10.12913/22998624/76488
 

Effect of Ringer's Solution on Tensile Strength of Non-Absorbable, Medium- and Long-Term Absorbable Sutures
Robert Karpiński, Jakub Szabelski, Jacek Maksymiuk
Adv. Sci. Technol. Res. J. 2017; 11(4):11-20
DOI: https://doi.org/10.12913/22998624/76084
 

Assessment of the Resistance to External Factors of Low-Density Polyethylene Modified with Natural Fillers
Karolina Głogowska, Łukasz Majewski, Ivan Gajdoš, Gerhard Mitaľ
Adv. Sci. Technol. Res. J. 2017; 11(4):35-40
DOI: https://doi.org/10.12913/22998624/75984
 

Properties of Moldings Prepared from LDPE-Pumpkin Seed Hulls Blend
Karolina Głogowska, Janusz Sikora, Ludmila Dulebova
Adv. Sci. Technol. Res. J. 2017; 11(4):318-325
DOI: https://doi.org/10.12913/22998624/74654
 

Wave Propagation Characteristics in Functionally Graded Double-Beams
Fatih Karacam, Metin Aydogdu
Adv. Sci. Technol. Res. J. 2017; 11(3):143-149
DOI: https://doi.org/10.12913/22998624/76697
 

The Effect of Particulate Fillers on Hardness of Polymer Composite
Ludmila Dulebova, Tomasz Garbacz
Adv. Sci. Technol. Res. J. 2017; 11(3):66-71
DOI: https://doi.org/10.12913/22998624/76601
 

Rheological Properties of Compositions Based on Modified Polyvinyl Alcohol
Volodymyr Krasinskyi, Oleh Suberlyak, Viktoria Antonuk, Tomasz Jachowicz
Adv. Sci. Technol. Res. J. 2017; 11(3):304-309
DOI: https://doi.org/10.12913/22998624/76584
 

Structure and Construction Assessment of the Surface Layer of Hardfaced Coating after Friction
Krzysztof Dziedzic, Mykhaylo Pashechko, Marcin Barszcz, Jerzy Józwik
Adv. Sci. Technol. Res. J. 2017; 11(3):253-260
DOI: https://doi.org/10.12913/22998624/76583
 

Analysis of Structure and Shear/Peel Strength of Refill Friction Stir Spot Welded 7075-T6 Aluminium Alloy Joints
Rafał Kluz, Andrzej Kubit, Dawid Wydrzyński
Adv. Sci. Technol. Res. J. 2017; 11(3):297-303
DOI: https://doi.org/10.12913/22998624/76481
 

Research into Morphology and Properties of TiO2 – NiAl Atmospheric Plasma Sprayed Coating
Andrzej Maruszczyk, Agata Dudek, Mirosław Szala
Adv. Sci. Technol. Res. J. 2017; 11(3):204-210
DOI: https://doi.org/10.12913/22998624/76450
 

Feeder Type Optimisation for the Plain Flow Discharge Process of an Underground Hopper by Discrete Element Modelling
Jan Nečas, Jakub Hlosta, David Žurovec, Martin Žídek, Jiří Rozbroj, Jiří Zegzulka
Adv. Sci. Technol. Res. J. 2017; 11(3):246-252
DOI: https://doi.org/10.12913/22998624/76100
 

Proposal of the Sound Insulating Measures for Vibrational Sorter and Verification of the Effectiveness Measures
Pavol Liptai, Marek Moravec, Ervin Lumnitzer, Marcela Gergeľová
Adv. Sci. Technol. Res. J. 2017; 11(3):196-203
DOI: https://doi.org/10.12913/22998624/76068
 

Structural and Thermal Properties of Nanocomposites Based on Polyolefins and Montmorillonite Modified with Ethyl 2-Aminobenzoate
Ewa Olewnik-Kruszkowska, Ewelina Chrzanowska
Adv. Sci. Technol. Res. J. 2017; 11(3):233-239
DOI: https://doi.org/10.12913/22998624/76065
 

EDM of Aluminum Alloy 6061 Using Graphite Electrode Using Paraffin Oil and Distilled Water as Dielectric Medium
Muhammad Imran, Masood Shah, Shahid Mehmood, Rubab Arshad
Adv. Sci. Technol. Res. J. 2017; 11(3):72-79
DOI: https://doi.org/10.12913/22998624/73821
 

Effect of Thermal Cycling on the Tensile Behavior of CF/AL Fiber Metal Laminates
Muhammad Farhan Noor, Riffat Asim Pasha, Aneela Wakeel, Muhammad Ali Nasir, Yasir Bilal
Adv. Sci. Technol. Res. J. 2017; 11(3):80-86
DOI: https://doi.org/10.12913/22998624/73820
 

The Properties of Regenerative Polymer Mass
Anna Rudawska, Albert Wierzchowski, Miroslav Müller, Jana Petrů, Nataša Náprstková
Adv. Sci. Technol. Res. J. 2017; 11(3):130-138
DOI: https://doi.org/10.12913/22998624/71149
 

FEM and Experimental Based Analysis of the Stamping Process of Aluminum Alloy
Patryk Różyło, Łukasz Wójcik
Adv. Sci. Technol. Res. J. 2017; 11(3):94-101
DOI: https://doi.org/10.12913/22998624/70691
 

Effect of Eccentricity of Load on Critical Force of Thin-Walled Columns CFRP
Pawel Wysmulski, Jan Kral
Adv. Sci. Technol. Res. J. 2017; 11(3):109-113
DOI: https://doi.org/10.12913/22998624/70690
 

Analysis of the Impact of Double Shot Peening on the Value of Roughness Parameter and Distribution of Stresses in the RSA 501 Alloy (Al Mg5 Mn1 Sc0.8 Zr0.4)
Paulina Byczkowska, Jacek Sawicki, Bartłomiej Januszewicz, Mariusz Stegliński
Adv. Sci. Technol. Res. J. 2017; 11(3):1-9
DOI: https://doi.org/10.12913/22998624/68462
 

Gas Evolution Qualitative Analyses From Modified Cellulose Mixtures During Thermal Degradation in Air and Argon
Zbigniew Zawieja, Jacek Sawicki
Adv. Sci. Technol. Res. J. 2017; 11(3):24-30
DOI: https://doi.org/10.12913/22998624/68461
 

NUMERICAL ANALYSIS OF THE STRESS-STRAIN STATE OF A ROPE STRAND WITH LINEAR CONTACT UNDER TENSION AND TORSION LOADING CONDITIONS
Evgenij Kalentev, Štefan Václav, Pavol Božek, Alexander Korshunov, Valerij Tarasov
Adv. Sci. Technol. Res. J. 2017; 11(2):231-239
DOI: https://doi.org/10.12913/22998624/71181
 

THE EFFECT OF PROCESS PARAMETERS ON THICKNESS DISTRIBUTION IN THERMOFORMING
Olcay Eksi, Sencer Süreyya Karabeyoğlu
Adv. Sci. Technol. Res. J. 2017; 11(2):198-204
DOI: https://doi.org/10.12913/22998624/71147
 

SIMULATION OF HELICAL GEAR FORMING OF AZ31 MAGNESIUM MATERIAL
Önder Ayer
Adv. Sci. Technol. Res. J. 2017; 11(2):187-191
DOI: https://doi.org/10.12913/22998624/70998
 

NUMERICAL THERMAL ANALYSIS OF A CAR BRAKING SYSTEM
Patryk Różyło
Adv. Sci. Technol. Res. J. 2017; 11(2):38-43
DOI: https://doi.org/10.12913/22998624/70693
 

THE EFFECT OF MAGNETIC FIELD ON THE EFFICIENCY OF A SILICON SOLAR CELL UNDER AN INTENSE LIGHT CONCENTRATION
Zoungrana Martial, Zerbo Issa, Soro Boubacar, Savadogo Mahamadi, Tiedrebeogo Sanna, Bathiebo Dieudonné Joseph
Adv. Sci. Technol. Res. J. 2017; 11(2):133-138
DOI: https://doi.org/10.12913/22998624/69699
 

INFLUENCE OF REPAINTING ON THE MECHANICAL PROPERTIES, SURFACE TOPOGRAPHY AND MICROSTRUCTURE OF POLYESTER POWDER COATINGS
Mirosław Szala, Edyta Kot
Adv. Sci. Technol. Res. J. 2017; 11(2):159-165
DOI: https://doi.org/10.12913/22998624/69680
 

ANALYSIS OF THERMAL PROPERTIES AND HEAT LOSS IN CONSTRUCTION AND ISOTHERMAL MATERIALS OF MULTILAYER BUILDING WALLS
Arkadiusz Urzędowski, Joanna Styczeń, Dorota Wójcicka-Migasiuk
Adv. Sci. Technol. Res. J. 2017; 11(2):33-37
DOI: https://doi.org/10.12913/22998624/69418
 

THE IMPACT OF THE ELEVATOR GUIDES CONTAMINATION ON THE BRAKING PROCESS DELAY FOR SELECTED PROGRESSIVE GEARS
Rafał Longwic, Kamil Szydło
Adv. Sci. Technol. Res. J. 2017; 11(2):1-7
DOI: https://doi.org/10.12913/22998624/68908
 

APPLICATION OF AN EQUIVALENT TRUSS MODEL FOR DETERMINING THE STRESS STATE IN MULTI-PHASE MATERIALS WITH CELLULAR AUTOMATA METHOD
Anna Staszczyk, Jacek Sawicki
Adv. Sci. Technol. Res. J. 2017; 11(2):51-57
DOI: https://doi.org/10.12913/22998624/68730
 

EFFECT OF ALUMINIUM AND MAGNESIUM ON THE CORROSION RESISTANCE OF ZINC COATINGS
Leszek Klimek, Joanna Waś-Solipiwo, Konrad Dybowski
Adv. Sci. Technol. Res. J. 2017; 11(2):28-32
DOI: https://doi.org/10.12913/22998624/67675
 

HYBRID LAYER TYPE Cr/LPC
Konrad Dybowski, Bartłomiej Januszewicz, Paulina Kowalczyk, Damian Batory
Adv. Sci. Technol. Res. J. 2017; 11(2):23-27
DOI: https://doi.org/10.12913/22998624/67672
 

THE INFLUENCE OF GRINDING CONDITIONS ON THE DISTRIBUTION OF RESIDUAL STRESS IN THE SURFACE LAYER OF 17crni6-6 STEEL AFTER CARBURIZING
Jacek Sawicki, Bogdan Kruszyński, Ryszard Wójcik
Adv. Sci. Technol. Res. J. 2017; 11(2):17-22
DOI: https://doi.org/10.12913/22998624/67671
 

THE IMPACT OF SELECTED TECHNOLOGICAL AND MATERIAL PARAMETERS ON THE STRENGTH OF ADHESIVE STEEL SHEETS JOINTS
Anna Rudawska, Katarzyna Głogowska, Tetiana Vitenko, Dana Stančeková, Nadežda Čuboňová, Dariusz Kasperek
Adv. Sci. Technol. Res. J. 2017; 11(2):8-16
DOI: https://doi.org/10.12913/22998624/67377
 

BUCKLING BEHAVIOUR OF SINGLE-WALLED CARBON NANOTUBES UNDER AXIAL LOADING
Grzegorz Litak
Adv. Sci. Technol. Res. J. 2017; 11(1):208-211
DOI: https://doi.org/10.12913/22998624/68468
 

POSTBUCKLING BEHAVIOUR OF LAMINATED PLATES WITH A CUT-OUT
Katarzyna Falkowicz, Hubert Dębski
Adv. Sci. Technol. Res. J. 2017; 11(1):186-193
DOI: https://doi.org/10.12913/22998624/68283
 

WC-Co COATINGS AND SINTERS MODIFIED WITH NANO-SIZED TiC MICROSTRUCTURE – QUANTITATIVE EVALUATION
Hanna Myalska, Bartłomiej Dybowski, Grzegorz Moskal
Adv. Sci. Technol. Res. J. 2017; 11(1):220-231
DOI: https://doi.org/10.12913/22998624/67679
 

NUMERICAL ANALYSIS OF THE CRITICAL STATE OF THIN-WALLED STRUCTURE WITH Z-PROFILE CROSS SECTION
Patryk Różyło, Daniel Łukasik
Adv. Sci. Technol. Res. J. 2017; 11(1):194-200
DOI: https://doi.org/10.12913/22998624/67677
 

LOW PRESSURE CARBURIZING IN A LARGE-CHAMBER DEVICE FOR HIGH-PERFORMANCE AND PRECISION THERMAL TREATMENT OF PARTS OF MECHANICAL GEAR
Emilia Wołowiec-Korecka, Maciej Korecki, Leszek Klimek, Piotr Kula, Agnieszka Brewka, Magdalena Buczek
Adv. Sci. Technol. Res. J. 2017; 11(1):253-258
DOI: https://doi.org/10.12913/22998624/67676
 

DISTORTION OF 16MnCr5 STEEL PARTS DURING LOW-PRESSURE CARBURIZING
Konrad Dybowski, Rafał Niewiedzielski
Adv. Sci. Technol. Res. J. 2017; 11(1):201-207
DOI: https://doi.org/10.12913/22998624/67674
 

HARDENING-RELATED DEFORMATIONS OF GEAR WHEELS AFTER VACUUM CARBURISING AND QUENCHING IN GAS
Wojciech Stachurski, Piotr Zgórniak, Jacek Sawicki, Mateusz Przybysz
Adv. Sci. Technol. Res. J. 2017; 11(1):237-245
DOI: https://doi.org/10.12913/22998624/67673
 

EFFECT OF CHIP BREAKERS ON THE CUTTING FORCE DURING THE MACHINING OF STEEL C45
Jiří Kratochvíl, Jana Petrů, Marek Pagáč, Jozef Holubják, Jozef Mrazik
Adv. Sci. Technol. Res. J. 2017; 11(1):173-178
DOI: https://doi.org/10.12913/22998624/66506
 

INFLUENCE OF THE HOMOGENIZATION TEMPERATURE ON THE MICROSTRUCTURE AND PROPERTIES OF AlSi10CuNiMgMn ALLOY
Jaromir Cais, Pavel Kraus, Irena Lysoňková
Adv. Sci. Technol. Res. J. 2017; 11(1):104-110
DOI: https://doi.org/10.12913/22998624/66503
 

THE EFFECT OF DEGREASING ON ADHESIVE JOINT STRENGTH
Anna Rudawska, Justyna Nalepa, Miroslav Müller
Adv. Sci. Technol. Res. J. 2017; 11(1):75-81
DOI: https://doi.org/10.12913/22998624/66500
 

ROP MATHEMATICAL MODEL OF ROTARY-ULTRASONIC CORE DRILLING OF BRITTLE MATERIAL
Mera Fayez Horne
Adv. Sci. Technol. Res. J. 2017; 11(1):1-28
DOI: https://doi.org/10.12913/22998624/68903
 

DETERMINATION OF RESIDUAL STRESS DISTRIBUTION IN HIGH STRENGTH ALUMINUM ALLOY AFTER EDM
Shahid Mehmood, Amir Sultan, Nazeer Ahmad Anjum, Waqas Anwar, Zubair Butt
Adv. Sci. Technol. Res. J. 2017; 11(1):29-35
DOI: https://doi.org/10.12913/22998624/68729
 

FRICTION MODELING OF Al-Mg ALLOY SHEETS BASED ON MULTIPLE REGRESSION ANALYSIS AND NEURAL NETWORKS
Hirpa G. Lemu, Tomasz Trzepieciński, Andrzej Kubit, Romuald Fejkiel
Adv. Sci. Technol. Res. J. 2017; 11(1):48-57
DOI: https://doi.org/10.12913/22998624/68460
 

MICROSTRUCTURAL STUDY OF FAILURE PHENOMENA IN WC 94%-Co 6% HARD METAL ALLOY TIPS OF RADIAL PICKS
Sakuntala Nahak, Somnath Chattopadhyaya, Saurabh Dewangan, Sergej Hloch, Grzegorz Krolczyk, Stanislaw Legutko
Adv. Sci. Technol. Res. J. 2017; 11(1):36-47
DOI: https://doi.org/10.12913/22998624/68457
 

FORMABILITY OF THIN SHEETS FROM ALUMINUM ALLOYS
Emil Spišák, Janka Majerníková, Ľuboš Kaščák
Adv. Sci. Technol. Res. J. 2016; 10(32):248-253
DOI: https://doi.org/10.12913/22998624/65759
 

EFFECT OF MOLECULAR WEIGHT ON THE YIELD BEHAVIOUR OF EPY EPOXY COMPOUND
Magdalena Urbaniak
Adv. Sci. Technol. Res. J. 2016; 10(32):230-239
DOI: https://doi.org/10.12913/22998624/65694
 

THE EFFECT OF MULTIPLE PROCESSING OF POLYPROPYLENE ON SELECTED PROPERTIES OF INJECTION MOULDED PARTS
Karolina Głogowska, Janusz Wojciech Sikora, Ludmila Dulebová
Adv. Sci. Technol. Res. J. 2016; 10(32):65-72
DOI: https://doi.org/10.12913/22998624/65139
 

STUDY OF CHIP IGNITION AND CHIP MORPHOLOGY AFTER MILLING OF MAGNESIUM ALLOYS
Ireneusz Zagórski, Józef Kuczmaszewski
Adv. Sci. Technol. Res. J. 2016; 10(32):101-108
DOI: https://doi.org/10.12913/22998624/65130
 

RESEARCH ON TRIBOLOGICAL PROPERTIES OF DENTAL COMPOSITE MATERIALS
Krzysztof Dziedzic, Joanna Zubrzycka-Wróbel, Jerzy Józwik, Marcin Barszcz, Piotr Siwak, Renata Chałas
Adv. Sci. Technol. Res. J. 2016; 10(32):144-149
DOI: https://doi.org/10.12913/22998624/65123
 

EFFECT OF ORGANOPHILIZATION AND INTERLAMELLAR SILYLATION OF MONTMORILLONITE ON COMPATIBLIZATION OF POLYMER COMPOSITES
Mamdouh Abdel Rahim, Mohamed Ismail, Ahmed Kandil
Adv. Sci. Technol. Res. J. 2016; 10(32):206-216
DOI: https://doi.org/10.12913/22998624/65121
 

THE ROLE OF SHIELDING GAS ON MECHANICAL, METALLURGICAL AND CORROSION PROPERTIES OF CORTEN STEEL WELDED JOINTS OF RAILWAY COACHES USING GMAW
Byju John, Sathiya Paulraj, Jolly Mathew
Adv. Sci. Technol. Res. J. 2016; 10(32):156-168
DOI: https://doi.org/10.12913/22998624/65119
 

FACTORS AFFECTING THE MECHANICAL PROPERTIES OF COMPACT BONE AND MINIATURE SPECIMEN TEST TECHNIQUES: A REVIEW
Vandana Chittibabu, Korada Santa Rao, Potnuru Govinda Rao
Adv. Sci. Technol. Res. J. 2016; 10(32):169-183
DOI: https://doi.org/10.12913/22998624/65117
 

ANALYSIS OF PRINTING PARAMETERS FOR PRODUCTION OF COMPONENTS WITH ​EASY3DMAKER​ PRINTER
Alexander Rengevič, Mikuláš Fúra, Nadežda Čuboňová
Adv. Sci. Technol. Res. J. 2016; 10(32):1-8
DOI: https://doi.org/10.12913/22998624/65114
 

APPLICATION OF CHEMICAL PRE-TREATMENT ON THE POLISHED SURFACE OF ALUMINIUM ALLOYS
Pavel Kraus, Jaroslava Svobodova, Jaromir Cais, Radek Lattner
Adv. Sci. Technol. Res. J. 2016; 10(32):17-23
DOI: https://doi.org/10.12913/22998624/65112
 

INFLUENCE OF THE THICKNESS OF Ni-P COATING APPLIED ON 7075 ALUMINUM ALLOY ON ITS HARDNESS
Kazimierz Czapczyk, Piotr Siwak, Piotr Jabłoński, Łukasz Furmański, Paweł Grobelny, Stanisław Legutko
Adv. Sci. Technol. Res. J. 2016; 10(32):53-58
DOI: https://doi.org/10.12913/22998624/65106
 

EFFECT OF SILICON CONTENT ON MACHINABILITY OF Al-Si ALLOYS
Birol Akyüz
Adv. Sci. Technol. Res. J. 2016; 10(31):51-57
DOI: https://doi.org/10.12913/22998624/64153
 

BEHAVIOR OF HELICAL PILES – AS A GEOENVIRONMENTAL CHOICE – BY FRUSTUM CONFINING VESSEL
Javad Khazaei, Abolfazl Eslami
Adv. Sci. Technol. Res. J. 2016; 10(31):8-22
DOI: https://doi.org/10.12913/22998624/64113
 

MECHANISMS OF CUTTING BLADE WEAR AND THEIR INFLUENCE ON CUTTING ABILITY OF THE TOOL DURING MACHINING OF SPECIAL ALLOYS
Tomáš Zlámal, Jana Petrů, Ondřej Vortel, Marek Pagáč, Pavel Krajkovič
Adv. Sci. Technol. Res. J. 2016; 10(31):144-150
DOI: https://doi.org/10.12913/22998624/64074
 

ANALYSIS OF DECREASE MACHINABILITY POSSIBLE CAUSES FOR CLAIMED ALLOY
Nataša Náprstková, Sylvia Kśmierczak
Adv. Sci. Technol. Res. J. 2016; 10(31):94-101
DOI: https://doi.org/10.12913/22998624/64073
 

THE VISUAL METHOD IN QUALITY ASSESSMENT OF SINGLE-LAP ADHESIVE JOINTS
Anna Rudawska, Dana Stančeková, Józef Brzęczek
Adv. Sci. Technol. Res. J. 2016; 10(31):109-118
DOI: https://doi.org/10.12913/22998624/64066
 

ADHESIVE BOND OF CARBON STEEL S235J0: EFFECTS OF ALUMINIUM AND POLYMER POWDER FILLED EPOXY ADHESIVES ON MECHANICAL PROPERTIES
Miroslav Müller, Petr Valášek
Adv. Sci. Technol. Res. J. 2016; 10(31):87-93
DOI: https://doi.org/10.12913/22998624/64065
 

EXPERIMENTAL AND NUMERICAL ANALYSIS OF THE COMPRESSION OF A THIN-WALLED COMPOSITE PLATE
Katarzyna Falkowicz, Przemysław Mazurek, Patryk Różyło, Paweł Wysmulski, Wojciech Smagowski
Adv. Sci. Technol. Res. J. 2016; 10(31):177-184
DOI: https://doi.org/10.12913/22998624/64063
 

EFFECT OF CURING TEMPERATURE IN THE ALKALI-ACTIVATED BLAST-FURNACE SLAG PASTE AND THEIR STRUCTURAL INFLUENCE OF POROSITY
Teresita de Jesús Medina-Serna, Susana Paola Arredondo-Rea, José Manuel Gómez-Soberón, Carlos Antonio Rosas-Casarez, Ramón Corral-Higuera
Adv. Sci. Technol. Res. J. 2016; 10(31):74-79
DOI: https://doi.org/10.12913/22998624/64021
 

STUDY OF COATINGS OBTAINED FROM ALLOY Fe-Mn-C-B-Si-Ni-Cr
Mychajło Paszeczko, Krzysztof Dziedzic, Marcin Barszcz
Adv. Sci. Technol. Res. J. 2016; 10(31):194-198
DOI: https://doi.org/10.12913/22998624/64020
 

GRINDABILITY OF SELECTED GRADES OF LOW-ALLOY HIGH-SPEED STEEL
Jan Jaworski, Rafał Kluz, Tomasz Trzepieciński
Adv. Sci. Technol. Res. J. 2016; 10(31):222-228
DOI: https://doi.org/10.12913/22998624/64018
 

MODAL ANALYSIS OF REAL TIMBER FRAME HOUSES WITH DIFFERENT INSULATION MATERIALS
Marcin Szczepański, Wojciech Migda, Robert Jankowski
Adv. Sci. Technol. Res. J. 2016; 10(31):215-221
DOI: https://doi.org/10.12913/22998624/64014
 

FATIGUE BEHAVIOR OF HOT MIX ASPHALT MODIFIED WITH NANO AL2O3 – AN EXPERIMENTAL STUDY
Amin Lotfi-Eghlim, Mohammad Saied Karimi
Adv. Sci. Technol. Res. J. 2016; 10(31):58-63
DOI: https://doi.org/10.12913/22998624/64011
 

TECHNOLOGY OF HEAT TREATING-STRAIGHTENING OF LONG SHAFTS WITH LOW RIGIDITY
Antoni Świć, Aleksandr Draczew, Arkadiusz Gola
Adv. Sci. Technol. Res. J. 2016; 10(31):207-214
DOI: https://doi.org/10.12913/22998624/64010
 

TRANSIENT FINITE ELEMENT SIMULATION AND MICROSTRUCTURE EVOLUTION OF AA2219 WELD JOINT USING GAS TUNGSTEN ARC WELDING PROCESS
Sivaraman Arunkumar, Anup Kulkarni Shrikrishna, Sathiya Paulraj, Kandasami Devakumaran, Subramanian Ramesh Kumar
Adv. Sci. Technol. Res. J. 2016; 10(31):64-73
DOI: https://doi.org/10.12913/22998624/64007
 

NUMERICAL ANALYSIS OF THE BEHAVIOR OF COMPRESSED THIN-WALLED ELEMENTS WITH HOLES
Patryk Różyło, Katarzyna Wrzesińska
Adv. Sci. Technol. Res. J. 2016; 10(31):199-206
DOI: https://doi.org/10.12913/22998624/64006
 

MODELLING AND CHARACTERIZATION OF LASER WELDED INCOLOY 800 HT JOINTS
Sathiya Paulraj, Arun Kumar Srirangan
Adv. Sci. Technol. Res. J. 2016; 10(30):115-126
DOI: https://doi.org/10.12913/22998624/62734
 

THE EFFECT OF FLY ASH ON FLEXURAL CAPACITY CONCRETE BEAMS
Amir Mohammad Amiri, Amin Olfati, Shima Najjar, Peyman Beiranvand, M.H. Naseri Fard
Adv. Sci. Technol. Res. J. 2016; 10(30):89-95
DOI: https://doi.org/10.12913/22998624/62630
 

SURFACE ROUGHNESS OF THIN-WALLED COMPONENTS MADE OF ALUMINIUM ALLOY EN AW-2024 FOLLOWING DIFFERENT MILLING STRATEGIES
Józef Kuczmaszewski, Paweł Pieśko, Magdalena Zawada-Michałowska
Adv. Sci. Technol. Res. J. 2016; 10(30):150-158
DOI: https://doi.org/10.12913/22998624/62515
 

SHEARING STRENGTH TEST OF ORTOPEDIC TITANIUM ALLOY SCREW PRODUCED IN THE PROCESS OF 3D TECHNOLOGY PRINTING
Patrycja Ruszniak, Jerzy Józwik, Dawid Ostrowski, Krzysztof Dziedzic
Adv. Sci. Technol. Res. J. 2017; 11(1):128-137
DOI: https://doi.org/10.12913/22998624/68405
 

THE MECHANISM OF FRICTION BETWEEN SURFACES WITH REGULAR MICRO GROOVES UNDER BOUNDARY LUBRICATION
Mykhaylo Pashechko, Myroslav Kindrachuk, Oleksandr Radionenko
Adv. Sci. Technol. Res. J. 2016; 10(32):82-85
DOI: https://doi.org/10.12913/22998624/65137
 

Analysis of the effect of vacuum pressure variations on the fluidity, form ability, hardness and density of the composite silicone rubber RTV 10A with 30% talc
Agus Suprihanto, Wahyu Caesarendra, Wibowo Basuki Dwi, Marian Bartoszuk, Gyula Varga
 

Assessment of the Conveyor Belt Strength Decrease due to the Long Term Exploitation in Harmful Conditions
Kamil Kurpanik, Sebastian Sławski, Tomasz Machoczek, Anna Woźniak, Sławomir Duda, Sławomir Kciuk
 

Applying the Machine Learning Method to Improve Calibration Quality of TDR Measuring Technique
Dominika Mikušová, Zbigniew Suchorab, Magdalena Paśnikowska-Łukaszuk, Jacek Zaburko, Anton Trnik
Adv. Sci. Technol. Res. J. 2024; 18(3):270-279
 

Adsorption Equilibrium Studies on the Example of Nitrate Removal Onto Char Produced from Waste Tires
Agata Skwarczynska-Wojsa, Ewa Szatyłowicz, Iwona Skoczko
Adv. Sci. Technol. Res. J. 2024; 18(3):246-256
 

Effect of Shot Peening Parameters on Surface Properties and Corrosion Resistance of 316L Stainless Steel
Mariusz Walczak, Jonas Matijošius, Doğuş Özkan, Kamil Pasierbiewicz
Adv. Sci. Technol. Res. J. 2024; 18(3):296-304
 

Effect of the Electrode Extension on the Geometry of Parts Made of 316LSi Steel by Wire Arc Additive Manufacturing Method (WAAM)
Przemysław Połaski, Dariusz Golański, Paweł Kołodziejczak, Anna Pakuła
Adv. Sci. Technol. Res. J. 2024; 18(3):343-359
 

Surface Modification of the Ti-35Nb-7Zr-5Ta Bio Alloy by the PM-EDM Route
Ahmed Rabeea Hayyawi, Haydar Al-Ethari, Ali Hubi Haleem
Adv. Sci. Technol. Res. J. 2024; 18(3):140-150
 

Design and Optimization of Casting System for Integrated Longitudinal Beam and Tower Package Based on Al-Si Alloy
Li Heng, Wang Nan, Teng Xingyu, Chai Zhen, Zhu Xiaoyong, Wu Yucheng
Adv. Sci. Technol. Res. J. 2024; 18(3):111-122
 

Screw Extrusion as a Scalable Technology for Manufacturing Carbon Nanotube-Filled Polylactide Composites
Daniel Kaczor, Krzysztof Bajer, Aneta Raszkowska-Kaczor, Grzegorz Jan Domek, Paweł Szroeder
Adv. Sci. Technol. Res. J. 2024; 18(3):99-110
 

The Use of Artificial Intelligence for Quality Assessment of Refill Friction Stir Spot Welded Thin Joints
Andrzej Kubit, Grzegorz Kłosowski, Wojciech Berezowski
Adv. Sci. Technol. Res. J. 2024; 18(3):45-57
 

Hot Ductility of High-Mn Steel with Niobium and Titanium
Marek Opiela, Gabriela Fojt-Dymara
Adv. Sci. Technol. Res. J. 2024; 18(3):200-213
 

Testing of the Light Transmittance of Industrial Varnishes
Wojciech Marek Żyłka, Piotr Potera
Adv. Sci. Technol. Res. J. 2024; 18(3):14-20
 

Modification of Microstructure and Surface Properties of Ti-6Al-4V Alloy by MoSi2 Particles Using Micro-Arc Oxidation Process
Nawar Fahem, Ali Haleem, Samir Awad
Adv. Sci. Technol. Res. J. 2024; 18(2):374-384
DOI: https://doi.org/10.12913/22998624/185409
 

Susceptibility to Stress Corrosion Cracking of Selected Amorphous Polymer Materials in a Sea-Water Environment
Monika Chomiak, Małgorzata Szymiczek, Sara Sarraj
Adv. Sci. Technol. Res. J. 2024; 18(3):1-13
 

Strength Analysis Aspects of Psyllium/Thermoplastic Starch Films under Impact Loading Conditions
Karolina Beer-Lech, Paweł Kołodziej, Anna Skic, Ricardo Branco
Adv. Sci. Technol. Res. J. 2024; 18(2):385-393
DOI: https://doi.org/10.12913/22998624/185393
 

Time-Resolved Sensitivity of a Cadmium-Doped Copper Oxide Thin Film as a Chlorine Gas Detector
Turki Alotibi, Waleed Shirbeeny, Ahmed Alshahrie, Mohammed Aida, Jawid Iqbal
Adv. Sci. Technol. Res. J. 2024; 18(2):365-373
DOI: https://doi.org/10.12913/22998624/185270
 

Screw Extrusion as a Scalable Technology for Manufacturing Polylactide Composite with Graphene Filler
Daniel Piotr Kaczor, Krzysztof Bajer, Aneta Raszkowska-Kaczor, Oksana Krasinska, Grzegorz Domek, Paweł Szroeder
Adv. Sci. Technol. Res. J. 2024; 18(2):226-237
DOI: https://doi.org/10.12913/22998624/184152
 

The Influence of Cold Deformation and Annealing on Texture Changes in Austenitic Stainless Steel
Joanna Kowalska, Małgorzata Witkowska
Adv. Sci. Technol. Res. J. 2024; 18(2):143-158
DOI: https://doi.org/10.12913/22998624/184115
 

Enhancing Electrical Discharge Machining Performance by Mixing Nano Chromium Trioxide Powder with Soybean Dielectric to Machine Inconel 718 Alloy
Dunya Adnan Ghulam, Abbas Fadhil Ibrahim
Adv. Sci. Technol. Res. J. 2024; 18(2):129-142
DOI: https://doi.org/10.12913/22998624/184100
 

Damages of the Section Insulator Guide Caused by Electric Arc
Jarosław Jozef Konieczny, Krzysztof Labisz
Adv. Sci. Technol. Res. J. 2024; 18(2):214-225
DOI: https://doi.org/10.12913/22998624/184091
 

The Effect of HVOF Spray Distance on Solid Particle Erosion Resistance of WC-based Cermets Bonded by Co, Co-Cr and Ni Deposited on Mg-alloy Substrate
Ewa Jonda, Leszek Łatka, Aleksandra Lont, Klaudiusz Gołombek, Mirosław Szala
Adv. Sci. Technol. Res. J. 2024; 18(2):115-128
DOI: https://doi.org/10.12913/22998624/184025
 

A Study on the Channel and Gap Flow Simulation For Electrical Discharge Micro-Drilling of Inconel 718 Superalloy
Magdalena Machno, Marcin Trajer, Adrian Czeszkiewicz, Paulina Żurawka
Adv. Sci. Technol. Res. J. 2024; 18(2):159-176
DOI: https://doi.org/10.12913/22998624/183998
 

Characterization of the Mechanical Behavior of Hemp-Clay Composites
Chaimae Haboubi, El Hassane Barhdadi, Khadija Haboubi, Yahya El Hammoudani, Zouhair Sadoune, Aouatif El Abdouni, Fouad Dimane
Adv. Sci. Technol. Res. J. 2024; 18(2):71-77
DOI: https://doi.org/10.12913/22998624/183949
 

Selected Methods of Modifying the Surface Layer of a Carbon Composite
Mariusz Kłonica, Andrzej Kubit, Ryszard Perłowski, Radosław Bielawski, Sławomir Woś
Adv. Sci. Technol. Res. J. 2024; 18(1):270-277
DOI: https://doi.org/10.12913/22998624/183101
 

Assessment of Nonhomogeneous Structures in Steel Contents in Terms of Fatigue Resistance Using Analytical Hierarchy Process
Ali Al-Maliki, Jasim H. Al-Bedhany, Tahseen Ali Mankhi, Stanislaw Legutko
Adv. Sci. Technol. Res. J. 2024; 18(1):334-348
DOI: https://doi.org/10.12913/22998624/182286
 

Influence of Different Polishing Methods on Surface Roughness and Microhardness of Dental Composites
Żaneta Anna Mierzejewska, Kamila Łukaszuk, Magdalena Choromańska, Anna Zalewska, Jan Borys, Bożena Antonowicz, Ewa Kulesza
Adv. Sci. Technol. Res. J. 2024; 18(1):268-279
DOI: https://doi.org/10.12913/22998624/178515
 

The Effect of Re Content on Microstructure and Creep Resistance of Single Crystal Castings Made of Nickel-Based Superalloys
Kamil Gancarczyk, Robert Albrecht, Małgorzata Kawalec, Barbara Kościelniak, Andrzej Gradzik, Dariusz Szeliga, Andrzej Kawalec, Waldemar Ziaja, Maciej Motyka
Adv. Sci. Technol. Res. J. 2024; 18(1):291-305
DOI: https://doi.org/10.12913/22998624/178463
 

Abrasion Resistance of Nickel- and Iron-base Hardfacings
Tadeusz Hejwowski, Daniel Łukasik
Adv. Sci. Technol. Res. J. 2024; 18(1):48-60
DOI: https://doi.org/10.12913/22998624/175969
 

Computational Methods of the Identification of Chaboche Isotropic-Kinematic Hardening Model Parameters Derived from the Cyclic Loading Tests
Marta Wójcik, Andrzej Gontarz, Andrzej Skrzat, Grzegorz Winiarski
Adv. Sci. Technol. Res. J. 2024; 18(1):61-75
DOI: https://doi.org/10.12913/22998624/175930
 

Evaluation of Structural Powder Steel Properties after High-Temperature Thermomechanical Treatment and Finish Turning
Kamil Leksycki, Eugene Feldshtein, Radosław Maruda, Larisa Dyachkova, Natalia Szczotkarz, Alexandra Zverko
Adv. Sci. Technol. Res. J. 2024; 18(1):26-35
DOI: https://doi.org/10.12913/22998624/175676
 

Investigations of the Effect of Heat Treatment and Plastic Deformation Parameters on the Formability and Microstructure of AZ91 Alloy Castings
Krzysztof Majerski, Ewa Siemionek, Michał Szucki, Piotr Surdacki
Adv. Sci. Technol. Res. J. 2024; 18(1):1-9
DOI: https://doi.org/10.12913/22998624/174932
 

Measurements of Tensile Strength and Elongation of 3D Printed Polylactide Solids Produced with Different Temperatures of Extruder Using Coordinate Measuring Technique and Finite Element Method
Anna Magdalena Gaweł, Ksenia Ostrowska, Aleksandra Lisowska
Adv. Sci. Technol. Res. J. 2023; 17(6):356-366
DOI: https://doi.org/10.12913/22998624/174907
 

Review of Magnesium Alloys Used in the Manufacture of Wheels for Light Vehicles
Ewa Siemionek, Krzysztof Majerski, Piotr Surdacki, Ema Novakova-Marcincinova
Adv. Sci. Technol. Res. J. 2023; 17(6):245-253
DOI: https://doi.org/10.12913/22998624/174686
 

Study of Crystalline and Thermal Properties of Nanocomposites Based on Polyamide-6 and Modified Montmorillonite
Volodymyr Krasinskyi, Ludmila Dulebova, Ivan Gajdoš, Oksana Krasinska, Tomasz Jachowicz
Adv. Sci. Technol. Res. J. 2023; 17(6):88-97
DOI: https://doi.org/10.12913/22998624/174180
 

Evaluation of Surface Preparation Technology for Steel Components with Fluoropolymer-based Coatings in Terms of Anti-adhesive and Mechanical Properties
Izabela Miturska-Barańska, Elżbieta Doluk
Adv. Sci. Technol. Res. J. 2023; 17(6):140-154
DOI: https://doi.org/10.12913/22998624/174110
 

The Influence of Pressure in the Infusion Method Upon Mechanical Properties of Polymer Composites
Jacek Janiszewski, Andrzej Komorek, Mieczysław Bakuła, Rafał Bieńczak, Bartosz Pękala
Adv. Sci. Technol. Res. J. 2023; 17(6):217-227
DOI: https://doi.org/10.12913/22998624/173382
 

Improve Single Point Incremental Forming Process Performance Using Primary Stretching Forming Process
Aqeel Sabree Bedan, Alaa Hassan Shabeeb, Emad Ali Hussein
Adv. Sci. Technol. Res. J. 2023; 17(5):260-268
DOI: https://doi.org/10.12913/22998624/172907
 

Investigate the Metallurgical, Degradation Behavior, and Mechanical Characteristics of a Novel Magnesium Alloy
Baraa H. Al Khaqani, Nawal Mohammed Dawood
Adv. Sci. Technol. Res. J. 2023; 17(5):302-312
DOI: https://doi.org/10.12913/22998624/172749
 

The Possibility of Using the Finite Element Method for Determining Thermal Diffusivity on the Example of Nickel Using the Classic and The Modified Pulse Method
Robert Szczepaniak, Janusz Terpiłowski, Grzegorz Woroniak
Adv. Sci. Technol. Res. J. 2023; 17(6):274-287
DOI: https://doi.org/10.12913/22998624/172365
 

Improving the Calibration of Surface Time Domain Reflectometry Sensors for Moisture Evaluation of Building Materials Using the Analysis of Covariance Method
Anna Futa, Magdalena Jastrzębska, Magdalena Paśnikowska-Łukaszuk, Elżbieta Wośko, Zbigniew Suchorab
Adv. Sci. Technol. Res. J. 2023; 17(5):326-336
DOI: https://doi.org/10.12913/22998624/172010
 

Tribology Characteristics of Heatproof Alloys at a Dynamic Pin Ladening in the Variable Temperature Field
Michał Bembenek, Volodymyr Tsyganov, Nataliia Sakhniuk, Olha Lazarieva, Ryszard Machnik, Liubomyr Ropyak
Adv. Sci. Technol. Res. J. 2023; 17(5):140-152
DOI: https://doi.org/10.12913/22998624/171836
 

Experimental Investigation on an Algorithm for Testing the Quality of Powder Distribution During 3D Printing Process
Marcin Korzeniowski, Aleksandra Małachowska, Mateusz Biały, Maria Kanczewska, Michał Tkaczyk, Krzysztof Grajczyk
Adv. Sci. Technol. Res. J. 2023; 17(5):289-301
DOI: https://doi.org/10.12913/22998624/171809
 

Impact of the Development of the Design of Firefighter Helmets on the Mechanical Shock Absorption Capacity
Agata Walczak, Daniel Pieniak, Paweł Lonkwic, Włodzimierz Kupicz, Szymon Ptak, Piotr Piątek, Wiktor Wąsik, Artur Renkas
Adv. Sci. Technol. Res. J. 2023; 17(6):171-184
DOI: https://doi.org/10.12913/22998624/171753
 

Investigation of Carbon Nanotube Particles Addition Effect on the Dispersed Composite Structure Thermal Diffusivity
Łukasz Omen, Robert Szczepaniak, Andrzej J. Panas
Adv. Sci. Technol. Res. J. 2023; 17(5):280-288
DOI: https://doi.org/10.12913/22998624/171593
 

Fracture Surface Topography Parameters for S235JR Steel Adhesive Joints After Fatigue Shear Testing
Andrzej Kubit, Wojciech Macek, Władysław Zielecki, Paulina Szawara, Mariusz Kłonica
Adv. Sci. Technol. Res. J. 2023; 17(5):130-139
DOI: https://doi.org/10.12913/22998624/171490
 

Numerical Analysis of Lamb Wave Propagation in Composite Plate with Different Fiber Orientation Angles – Acoustic Emission Approach
Jakub Rzeczkowski
Adv. Sci. Technol. Res. J. 2023; 17(5):104-113
DOI: https://doi.org/10.12913/22998624/171452
 

Investigation of Multi-Cold Rolling Passes on Mechanical Characteristics and Surface Quality of AlCuV Alloy
Nabeel Abu Shaban, Safwan M Al-Qawabah, Hashem S. Alkhaldi
Adv. Sci. Technol. Res. J. 2023; 17(5):68-76
DOI: https://doi.org/10.12913/22998624/171265
 

Microstructure and Mechanical Properties of AISI 1106 /AISI 1045 Steels Drawn Arc Stud Welded Joints
Samer Jasim Mahmood Algodi, Abdulhakeem Amer Salman, Ali H. Al-helli
Adv. Sci. Technol. Res. J. 2023; 17(5):48-55
DOI: https://doi.org/10.12913/22998624/171020
 

Investigation of the Impact of Face Milling Parameters on the Roughness of the Machined Surface for 1.4301 Steel
Michał Bembenek, Damian Dzienniak, Agnieszka Dzindziora, Maciej Sułowski, Liubomyr Ropyak
Adv. Sci. Technol. Res. J. 2023; 17(4):299-312
DOI: https://doi.org/10.12913/22998624/170422
 

Numerical and Experimental Study of Crack Propagation in the Tensile Composite Plate with the Open Hole
Pawel Wysmulski
Adv. Sci. Technol. Res. J. 2023; 17(4):249-261
DOI: https://doi.org/10.12913/22998624/169970
 

Mandrel-Free Bending of Tubes with Small Radii – A Theoretical and Experimental Study
Jacek Michalczyk, Andrzej Gontarz, Sylwia Wiewiórowska, Grzegorz Winiarski
Adv. Sci. Technol. Res. J. 2023; 17(4):189-205
DOI: https://doi.org/10.12913/22998624/169883
 

Comparative Investigation of Yield and Quality of Carbon Nanotubes by Catalytic Conversion of Recycled Polypropylene and Polyethylene Plastics over Fe-Co-Mo/CaCO3 Based on Chemical Vapour Deposition
Matthew Adah Onu, Olusola Olaitan Ayeleru, Bilainu Oboirien, Peter Apata Olubambi
Adv. Sci. Technol. Res. J. 2023; 17(5):174-186
DOI: https://doi.org/10.12913/22998624/169133
 

Assessment of Removal of Fines from Reclaimed Asphalt Binder Using Fourier Transform Infrared Spectroscopy
Pranoti Deepak Dare, Namdeo Hedaoo
Adv. Sci. Technol. Res. J. 2023; 17(4):79-88
DOI: https://doi.org/10.12913/22998624/169059
 

Validation of Extension-Bending and Extension-Twisting Coupled Laminates in Elastic Element
Katarzyna Falkowicz
Adv. Sci. Technol. Res. J. 2023; 17(3):309-319
DOI: https://doi.org/10.12913/22998624/167451
 

Investigating the Effect of Hybrid Process: MPF/SPIF on the Microstructure and Mechanical Properties of Brass (65-35) Sheet
Aqeel Sabree Bedan, Samer Jasim Algodi, Emad Ali Hussain
Adv. Sci. Technol. Res. J. 2023; 17(3):302-308
DOI: https://doi.org/10.12913/22998624/167409
 

Wear Processes of Abrasion-Resistant Materials in Soil Environments of Varying pH
Jerzy Napiórkowski, Krzysztof Ligier, Magdalena Lemecha
Adv. Sci. Technol. Res. J. 2023; 17(3):269-279
DOI: https://doi.org/10.12913/22998624/166508
 

Investigation of Adding Microscopic Slide Glass Nano Particles on the Metallurgical Characterization and Mechanical Properties of Cast Aluminum 7075 Composites
Haneen Lateef, Shukry H. Aghdeab, Baha S. Mahdi
Adv. Sci. Technol. Res. J. 2023; 17(3):214-225
DOI: https://doi.org/10.12913/22998624/166282
 

Effect of Arc Strikes on High Strength Low Alloy Steels Welded by SMAW
Dariusz Fydrych, Przemysław Raczko, Aleksandra Świerczyńska, Michał Landowski, Adrian Wolski, Grzegorz Rogalski
Adv. Sci. Technol. Res. J. 2023; 17(3):160-169
DOI: https://doi.org/10.12913/22998624/166061
 

Surface Characteristics and Wear Resistance of 316L Stainless Steel after Different Shot Peening Parameters
Mariusz Walczak
Adv. Sci. Technol. Res. J. 2023; 17(3):124-132
DOI: https://doi.org/10.12913/22998624/165800
 

Electron Magnetic Resonance Study of the Most Sensitive Metal Paint Components for Degradation
Wojciech Marek Żyłka, Bogumił Cieniek, Patrycja Skała
Adv. Sci. Technol. Res. J. 2023; 17(3):101-109
DOI: https://doi.org/10.12913/22998624/164724
 

Limitations of Short Basalt Fibers Use as an Effective Reinforcement of Polyethylene Composites in Rotational Molding Technology
Joanna Aniśko, Dawid Bartczak, Mateusz Barczewski
Adv. Sci. Technol. Res. J. 2023; 17(3):110-123
DOI: https://doi.org/10.12913/22998624/163579
 

A Review on Additive Manufacturing – Methods, Materials, and its Associated Failures
Siddhant Gade, Shashikant Vagge, Manoj Rathod
Adv. Sci. Technol. Res. J. 2023; 17(3):40-63
DOI: https://doi.org/10.12913/22998624/163001
 

Effect of Non-Metallic Inclusions on the Hot Ductility of High-Mn Steels
Marek Opiela, Gabriela Fojt-Dymara
Adv. Sci. Technol. Res. J. 2023; 17(3):19-30
DOI: https://doi.org/10.12913/22998624/162702
 

Influence of Water-Jet on Micro-Formed Parts Process via Nano-Indentation and SEM Analysis
James Kwasi Quaisie, Philip Yamba, Vitus Mwinteribo Tabie, Anthony Akayeti, Jamal-Deen Kukurah, Abdul-Hamid Mohammed
Adv. Sci. Technol. Res. J. 2023; 17(2):353-361
DOI: https://doi.org/10.12913/22998624/161884
 

A Short Overview of the Possibilities of Using Waste from the Agri-Food Industry
Magdalena Joka Yildiz, Monika Kalinowska, Katarzyna Kalinowska-Wichrowska, Ewelina Gołębiewska, Piotr Tarasewicz, Tomasz Bobin, Dominik Tarapata, Ewa Szatyłowicz, Jolanta Piekut
Adv. Sci. Technol. Res. J. 2023; 17(2):342-352
DOI: https://doi.org/10.12913/22998624/161840
 

Effect of Annealing Treatment on (Mg17Al12) Phase Characterization and Corrosion Behavior in Different Solutions for AZ91 Alloy
Marwa H. Abass, Makarim H. Abdulkareem, Hussien A. Hussein
Adv. Sci. Technol. Res. J. 2023; 17(2):330-341
DOI: https://doi.org/10.12913/22998624/161831
 

Effect of Volume Percentage of Reinforcement on the Microstructure and Mechanical Properties of an Al6061-T6/SiC Surface Composite Fabricated Through Friction Stir Processing
Abdul Jabbar Ansari, Mohd. Anas
Adv. Sci. Technol. Res. J. 2023; 17(2):247-257
DOI: https://doi.org/10.12913/22998624/161690
 

Experimental Research in the Aspect of Determining the Mechanical and Strength Properties of the Composite Material Made of Carbon-Epoxy Composite
Patryk Różyło, Wojciech Smagowski, Jakub Paśnik
Adv. Sci. Technol. Res. J. 2023; 17(2):232-246
DOI: https://doi.org/10.12913/22998624/161598
 

Comparative Evaluation of the Selected Mechanical Properties of Polymer Composites Reinforced with Glass and Hemp Fabrics
Mieczysław Scheibe, Katarzyna Bryll, Piotr Brożek, Dorota Czarnecka-Komorowska, Mariusz Sosnowski, Janusz Grabian, Tomasz Garbacz
Adv. Sci. Technol. Res. J. 2023; 17(2):268-278
DOI: https://doi.org/10.12913/22998624/161449
 

The Influence of Metal Reinforcement upon the Ablative Properties of Multi-Layered Composites
Paweł Przybyłek, Andrzej Komorek, Robert Szczepaniak
Adv. Sci. Technol. Res. J. 2023; 17(2):111-119
DOI: https://doi.org/10.12913/22998624/161427
 

Abrasive Wear Mechanisms of S235JR, S355J2, C45, AISI 304, and Hardox 500 Steels Tested Using Garnet, Corundum and Carborundum Abrasives
Mirosław Szala, Michał Szafran, Jonas Matijošius, Kazimierz Drozd
Adv. Sci. Technol. Res. J. 2023; 17(2):147-160
DOI: https://doi.org/10.12913/22998624/161277
 

Material Selection of Collapsible Pot Hauler and Finite Element Analysis Simulation Applied to the Selected Material
Rahmad Surya Hadi Saputra, Budhi Hascaryo Iskandar, Vita Rumanti Kurniawati, Desrial Desrial, Ari Purbayanto
Adv. Sci. Technol. Res. J. 2023; 17(2):289-298
DOI: https://doi.org/10.12913/22998624/161238
 

Determination of Critical Damage Function Values of CW008A Copper and S355 Steel in Tensile and Torsion Tests
Patrycja Walczuk-Gągała, Zbigniew Pater, Łukasz Wójcik, Konrad Lis
Adv. Sci. Technol. Res. J. 2023; 17(2):173-180
DOI: https://doi.org/10.12913/22998624/161053
 

Investigations on the Microstructure and Corrosion Performance of Different WC-Based Cermet Coatings Deposited by High Velocity Oxy Fuel Process onto Magnesium Alloy Substrate
Ewa Jonda, Leszek Łatka, Artur Maciej, Alexandr Khozhanov
Adv. Sci. Technol. Res. J. 2023; 17(2):25-35
DOI: https://doi.org/10.12913/22998624/160513
 

Numerical Modelling and Experimental Testing on Polyurethane Adhesively Bonded Joints Behaviour in Wood-Wood and Wood-Carbon Fibre Reinforced Polymer Layouts
Bartosz Kawecki
Adv. Sci. Technol. Res. J. 2023; 17(2):36-52
DOI: https://doi.org/10.12913/22998624/159723
 

Mechanically Stimulated Changes in Surface Electrical Conductivity of X-Irradiated Silicon Crystals
Roman Lys, Marta Żyłka, Josyp Shykorjak, Dmytro Slobodzyan, Wojciech Żyłka, Bohdan Pavlyk
Adv. Sci. Technol. Res. J. 2023; 17(2):226-231
DOI: https://doi.org/10.12913/22998624/159135
 

Oxidative Aging Characterization of Pyro-Oil Modified Binders Using Fourier Transform Infrared Spectroscopy
Nikita Taran Bhagat, Hemantkumar Prakash Hadole, Mahadeo Sambhaji Ranadive
Adv. Sci. Technol. Res. J. 2023; 17(1):140-149
DOI: https://doi.org/10.12913/22998624/159056
 

Research on an Innovative FLEX Bicycle Frame with a Softtail Vibration Damping System
Łukasz Kuczek, Paweł Marczak, Wacław Muzykiewicz, Marcin Mroczkowski, Paweł Paćko, Dawid Drop
Adv. Sci. Technol. Res. J. 2023; 17(1):290-303
DOI: https://doi.org/10.12913/22998624/159041
 

Testing of Technical Fabrics under Fast Camera Control
Paweł Kłosowski, Krystyna Michałowska, Marek Przyborski, Wojciech Jurczak
Adv. Sci. Technol. Res. J. 2023; 17(1):332-344
DOI: https://doi.org/10.12913/22998624/158883
 

Analysis of Torsional Strength of PA2200 Material Shape Additively with the Selective Laser Sintering Technology
Jacek Bernaczek, Mariusz Dębski, Małgorzata Gontarz, Roman Grygoruk, Jerzy Józwik, Bogdan Kozik, Piotr Mikulski
Adv. Sci. Technol. Res. J. 2023; 17(2):12-24
DOI: https://doi.org/10.12913/22998624/158838
 

Unconventional Methods of Joining Composites and Metals in the Context of Weight Reduction of Car Bodies
Dušan Sabadka, Stefan Kender
Adv. Sci. Technol. Res. J. 2023; 17(1):230-242
DOI: https://doi.org/10.12913/22998624/158538
 

Selected Aspects of 3D Printing for Emergency Replacement of Structural Elements
Krzysztof Jasiński, Lech Murawski, Marcin Kluczyk, Adam Muc, Adam Szeleziński, Tomasz Muchowski, Marek Chodnicki
Adv. Sci. Technol. Res. J. 2023; 17(1):274-289
DOI: https://doi.org/10.12913/22998624/158486
 

Temperature and Die Angular Effect on Tensile Strength, Hardness, Extrusion Load and Flow Stress in Aluminum 6063 Processed by Equal Channel Angular Extrusion Method
Temitayo M. Azeez, Lateef O. Mudashiru, Tesleem B. Asafa, Saheed Akande, Omolayo M. Ikumapayi, Joseph F. Kayode, Ikenna D. Uchegbu, Sunday A. Afolalu
Adv. Sci. Technol. Res. J. 2023; 17(1):345-353
DOI: https://doi.org/10.12913/22998624/158018
 

Combined Effect of CrB2 Micropowder and VN Nanopowder on the Strength and Wear Re-sistance of Fe‒Cu–Ni–Sn Matrix Diamond Composites
Boranbay Ratov, Volodymyr Mechnik, Miroslaw Rucki, Edwin Gevorkyan, Arturas Kilikevicius, Vasyl Kolodnitskyi, Zbigniew Siemiatkowski, Gulzada Umirova, Leszek Chalko, Jerzy Jozwik, Arailym Zhanggirkhanova, Volodymyr Chishkala, Dmytro Korostyshevskyi
Adv. Sci. Technol. Res. J. 2023; 17(1):23-24
DOI: https://doi.org/10.12913/22998624/157394
 

Geometrical Accuracy of Threaded Elements Manufacture by 3D Printing Process
Grzegorz Budzik, Tomasz Dziubek, Andrzej Kawalec, Paweł Turek, Anna Bazan, Mariusz Dębski, Jerzy Józwik, Przemysław Poliński, Mateusz Kiełbicki, Łukasz Kochmański, Mariusz Oleksy, Józef Cebulski, Andrzej Paszkiewicz, Ivan Kuric
Adv. Sci. Technol. Res. J. 2023; 17(1):35-45
DOI: https://doi.org/10.12913/22998624/157393
 

Dimensional-Shape Verification of a Selected Part of Machines Manufactured by Additive Techniques
Jacek Bernaczek, Grzegorz Budzik, Tomasz Dziubek, Łukasz Przeszłowski, Kinga Wójciak
Adv. Sci. Technol. Res. J. 2023; 17(1):46-57
DOI: https://doi.org/10.12913/22998624/157289
 

The Influence of Operational Exposure on Changes in Parameters of Effective Camouflage of Coatings Used in Military Technology
Marek Michalski, Urszula Pisarek, Norbert Radek, Wojciech Przybył, Marcin Szczepaniak
Adv. Sci. Technol. Res. J. 2023; 17(1):182-196
DOI: https://doi.org/10.12913/22998624/156940
 

Fabrication, Microstructure, and Mechanical Properties of AZ31/Silicon Carbide/Graphite Reinforced Hybrid Composites
Itha Veeranjaneyulu, Chittaranjan das Vemulapalli, M. Gopi Krishna
Adv. Sci. Technol. Res. J. 2022; 16(6):286-293
DOI: https://doi.org/10.12913/22998624/156915
 

Application of the Acoustic Emission Technique for Damage Identification in the Fiber Reinforced Polymer Composites
Sylwester Samborski, Izabela Korzec
Adv. Sci. Technol. Res. J. 2023; 17(1):210-221
DOI: https://doi.org/10.12913/22998624/156602
 

Production and Characterization of Activated Carbon from Date Seeds
Ali Abdulsalam Mustafa, Hesham Jaber Alnoor
Adv. Sci. Technol. Res. J. 2022; 16(6):198-203
DOI: https://doi.org/10.12913/22998624/156491
 

Parametric Studies on Structural Behaviour of Strengthened Beams Using Glass Fiber Reinforced Plastic
Er. Akshay D. Barkale, Sunil B. Thakare
Adv. Sci. Technol. Res. J. 2022; 16(6):192-197
DOI: https://doi.org/10.12913/22998624/156336
 

The Bio-Oil Production by Pulse Power Discharges
Sebastian Gnapowski, Volodymyr Holubets, Ernest Gnapowski
Adv. Sci. Technol. Res. J. 2022; 16(6):226-231
DOI: https://doi.org/10.12913/22998624/156206
 

Influence of Physical and Constructive Parameters on Durability of Sieves of Grain Cleaning Machines
Serhii Kharchenko, Farida Kharchenko, Sylwester Samborski, Jakub Paśnik, Stepan Kovalyshyn, Kiril Sirovitskiy
Adv. Sci. Technol. Res. J. 2022; 16(6):156-165
DOI: https://doi.org/10.12913/22998624/156128
 

A Study on Accuracy of Micro-Holes Drilled in Ti-6Al-4V Alloy by Using Electrical Discharge Machining Process
Magdalena Machno, Marcin Trajer, Wojciech Bizoń, Adrian Czeszkiewicz
Adv. Sci. Technol. Res. J. 2022; 16(6):55-72
DOI: https://doi.org/10.12913/22998624/155224
 

Influence of the Titanium Carbide Reinforcing Phase Content on Surface Geometric Structure Parameters of H13 Steel-Based Composite Materials Obtained by Selective Laser Melting
Emilia Bachtiak-Radka, Marta Beata Krawczyk
Adv. Sci. Technol. Res. J. 2022; 16(6):36-49
DOI: https://doi.org/10.12913/22998624/155204
 

Analysis and Assessment of Aluminum and Aluminum-Ceramic Foams Structure
Michał Rogala, Wojciech Tuchowski, Dorota Czarnecka-Komorowska, Katarzyna Gawdzińska
Adv. Sci. Technol. Res. J. 2022; 16(4):287-297
DOI: https://doi.org/10.12913/22998624/153028
 

Microstructure and Hardness of Cold Forged 42CrMo4 Steel Hollow Component with the Outer Flange
Mirosław Szala, Grzegorz Winiarski, Tomasz Adam Bulzak, Łukasz Wójcik
Adv. Sci. Technol. Res. J. 2022; 16(4):201-210
DOI: https://doi.org/10.12913/22998624/152790
 

Microstructure and Properties of Dissimilar Joints of AISI 430 Steel with Inconel 625 Obtained by Electron Beam Welding
Małgorzata Dziekońska, Ewa Jonda, Marek Sroka, Marek Węglowski, Tymoteusz Jung
Adv. Sci. Technol. Res. J. 2022; 16(4):232-242
DOI: https://doi.org/10.12913/22998624/152529
 

Efficiency of Filters Filled with Rockfos for Phosphorus Removal from Domestic Sewage
Aneta Pytka-Woszczyło, Monika Różańska-Boczula, Magdalena Gizińska-Górna, Michał Marzec, Agnieszka Listosz, Krzysztof Jóźwiakowski
Adv. Sci. Technol. Res. J. 2022; 16(4):176-188
DOI: https://doi.org/10.12913/22998624/152527
 

Prediction of the Properties of Modified Phenol-Formaldehyde Composites Using Mathematical Modeling of the Composition of the Polymer Mixture
Volodymyr Krasinskyi, Tomasz Jachowicz, Rafał Malinowski, Krzysztof Bajer, Ludmila Dulebova
Adv. Sci. Technol. Res. J. 2022; 16(4):138-146
DOI: https://doi.org/10.12913/22998624/152454
 

Effect of Nanofillers on the Mechanical Properties of Vinyl Ester Resin Used as a Carbon Fiber Reinforced Polymer Matrix
Andrzej Kubit, Magdalena Bucior, Rafał Kluz, Krzysztof Ochałek, Katarzyna Burnat
Adv. Sci. Technol. Res. J. 2022; 16(4):10-21
DOI: https://doi.org/10.12913/22998624/152053
 

Tribological Properties of Al 7075 Composite Reinforced with ZrB2 Using Grey Relational Analysis
Srikanth Karumuri, V. Chittaranjan Das, Gopi Krishna Mallarapu
Adv. Sci. Technol. Res. J. 2022; 16(4):22-28
DOI: https://doi.org/10.12913/22998624/152020
 

Shear-Induced Molecular Orientation of Compression Moulded PE-HD Sheets
Monika Chomiak, Józef Stabik
Adv. Sci. Technol. Res. J. 2022; 16(4):85-95
DOI: https://doi.org/10.12913/22998624/151925
 

Investigation on Corrosion Inhibition of Hura Crepitans for 2101 Duplex Stainless Steel in an Acidic Environment
Oluwafemi Temitayo Ogunmodede, Vawe Humwapwa, Johnson Jonathan, Ezekiel Adewole, Ilesanmi Osasona
Adv. Sci. Technol. Res. J. 2022; 16(4):56-63
DOI: https://doi.org/10.12913/22998624/151693
 

Thermodynamic Analysis of Precipitation Process of Complex Carbonitride TixV1-xCyN1-y in HSLA-Type Steel
Marek Opiela, Anna Wojtacha
Adv. Sci. Technol. Res. J. 2022; 16(4):64-73
DOI: https://doi.org/10.12913/22998624/151634
 

UV Degradation Influence on the Selected Physical Properties of Extruded PVC/Ceramic Composites
Aneta Tor-Świątek, Łukasz Garbacz
Adv. Sci. Technol. Res. J. 2022; 16(3):282-294
DOI: https://doi.org/10.12913/22998624/150400
 

Bamboo as a Construction Material: Prospects and Challenges
Muhammad Fahim, Muhammad Haris, Wajid Khan, Saeed Zaman
Adv. Sci. Technol. Res. J. 2022; 16(3):165-175
DOI: https://doi.org/10.12913/22998624/149737
 

Using of Adhesives and Binders for Agglomeration of Particle Waste Resources
Sameh Alsaqoor, Gabriel Borowski, Ali Alahmer, Nabil Beithou
Adv. Sci. Technol. Res. J. 2022; 16(3):124-135
DOI: https://doi.org/10.12913/22998624/149456
 

Internal Corrosion Damage Mechanisms of the Underground Ferrous Water Pipelines
Desalegn A. Yeshanew, Moera G. Jiru, Hirpa G. Lemu, Mesay A. Tolcha
Adv. Sci. Technol. Res. J. 2022; 16(3):111-123
DOI: https://doi.org/10.12913/22998624/149369
 

The Potential of Sisal Fibre as an Additive in Lightweight Foamed Concrete for Thermal Properties Enhancement
Md Azree Othuman Mydin
Adv. Sci. Technol. Res. J. 2022; 16(3):89-97
DOI: https://doi.org/10.12913/22998624/149213
 

Effect of Surface Tilt on Nanoindentation Measurement on Copper and Glass
Jarosław Borc
Adv. Sci. Technol. Res. J. 2022; 16(3):78-88
DOI: https://doi.org/10.12913/22998624/148167
 
Please use the template when preparing your article
Most read
Indexes
 
Keywords index
Authors index
Journals System - logo
© 2006-2024 Journal hosting platform by Bentus
Scroll to top