PL EN
 
PL EN
Bieżące wydanie
O czasopiśmie
Zespół Redakcyjny
Redakcja i Wydawca
Opłaty za publikacje
Open Access

Słowo kluczowe additive manufacturing

 

Study on Chip Breakability Index During Longitudinal Turning of Cast and DMLS Additively Manufactured AlSi10Mg Aluminum Alloy
Grzegorz Krzysztof Struzikiewicz, Bogdan Słodki, Wojciech Zębala, Emilia Franczyk
Adv. Sci. Technol. Res. J. 2022; 16(1):28-35
DOI: https://doi.org/10.12913/22998624/143503
 

Rapid Manufacturing of Individualized Prosthetic Sockets
Filip Górski, Radosław Wichniarek, Wiesław Kuczko, Magdalena Żukowska, Ewa Suszek
Adv. Sci. Technol. Res. J. 2020; 14(1):42-49
DOI: https://doi.org/10.12913/22998624/113425
 

Influence of Sterilization of a Product Manufactured Using FDM Technology on its Dimensional Accuracy
Wiesław Kuczko, Radosław Wichniarek, Filip Górski, Jacek Banaszewski
Adv. Sci. Technol. Res. J. 2018; 12(1):74-79
DOI: https://doi.org/10.12913/22998624/80849
 

Dimensional Accuracy of Parts Manufactured by 3D Printing for Interaction in Virtual Reality
Radosław Wichniarek, Filip Górski, Wiesław Kuczko, Przemysław Zawadzki, Paweł Buń
Adv. Sci. Technol. Res. J. 2017; 11(4):279-285
DOI: https://doi.org/10.12913/22998624/80848
 

Prototyping of Individual Ankle Orthosis Using Additive Manufacturing Technologies
Natalia Wierzbicka, Filip Górski, Radosław Wichniarek, Wiesław Kuczko
Adv. Sci. Technol. Res. J. 2017; 11(3):283-288
DOI: https://doi.org/10.12913/22998624/76070
 

Prototyping of Cosmetic Prosthesis of Upper Limb Using Additive Manufacturing Technologies
Aleksandra Radosh, Wiesław Kuczko, Radosław Wichniarek, Filip Górski
Adv. Sci. Technol. Res. J. 2017; 11(3):102-108
DOI: https://doi.org/10.12913/22998624/70995
 

MECHANICAL PROPERTIES OF PARTS OF MEDICAL PRODUCTS PRODUCED USING ADDITIVE MANUFACTURING TECHNOLOGIES
Filip Górski, Radosław Wichniarek, Wiesław Kuczko, Marta Burdzińska, Michalina Jankowska
Adv. Sci. Technol. Res. J. 2017; 11(2):166-171
DOI: https://doi.org/10.12913/22998624/70997
 

INFLUENCE OF POST-PROCESSING ON ACCURACY OF FDM PRODUCTS
Wiesław Kuczko, Filip Górski, Radosław Wichniarek, Paweł Buń
Adv. Sci. Technol. Res. J. 2017; 11(2):172-179
DOI: https://doi.org/10.12913/22998624/70996
 

APPLICATION OF ADDITIVELY MANUFACTURED POLYMER COMPOSITE PROTOTYPES IN FOUNDRY
Wiesław Kuczko, Radosław Wichniarek, Filip Górski, Paweł Buń, Przemysław Zawadzki
Adv. Sci. Technol. Res. J. 2015; 9(26):20-27
DOI: https://doi.org/10.12913/22998624/2360
 

Effect of the Electrode Extension on the Geometry of Parts Made of 316LSi Steel by Wire Arc Additive Manufacturing Method
Przemysław Połaski, Dariusz Golański, Paweł Kołodziejczak, Anna Pakuła
Adv. Sci. Technol. Res. J. 2024; 18(3):343-359
DOI: https://doi.org/10.12913/22998624/186362
 

Additive and Subtractive Manufacturing of Inconel 718 Components - Estimation of Time, Costs and Carbon Dioxide Emission – Case Study
Wojciech Zębala, Anna Gaweł
Adv. Sci. Technol. Res. J. 2024; 18(1):98-109
DOI: https://doi.org/10.12913/22998624/176824
 

Computational and Experimental Investigation of Inert Gas Flow Field in Direct Metal Laser Melting Printer Build Chamber
Paweł Czekałowski, Wit Stryczniewicz, Paweł Żuk, Krzysztof Panna, Paweł Borkowski, Michał Bujak, Tomasz Iglewski
Adv. Sci. Technol. Res. J. 2023; 17(6):378-387
DOI: https://doi.org/10.12913/22998624/174955
 

Geometrical Accuracy and Strength of Micro-Needles Made of Polylactide by Fused Filament Fabrication Method
Radosław Wichniarek, Wiesław Kuczko, Dorota Tomczak, Ariadna Nowicka, Monika Wojtyłko, Anna Froelich, Tomasz Osmałek
Adv. Sci. Technol. Res. J. 2023; 17(6):116-126
DOI: https://doi.org/10.12913/22998624/174079
 

Parametric Prediction of FDM Process to Improve Tensile Properties Using Taguchi Method and Artificial Neural Network
Dina Ali, Abdullah F. Huayier, Abass Enzi
Adv. Sci. Technol. Res. J. 2023; 17(4):130-138
DOI: https://doi.org/10.12913/22998624/169572
 

A Review on Additive Manufacturing – Methods, Materials, and its Associated Failures
Siddhant Gade, Shashikant Vagge, Manoj Rathod
Adv. Sci. Technol. Res. J. 2023; 17(3):40-63
DOI: https://doi.org/10.12913/22998624/163001
 

Analysis of Torsional Strength of PA2200 Material Shape Additively with the Selective Laser Sintering Technology
Jacek Bernaczek, Mariusz Dębski, Małgorzata Gontarz, Roman Grygoruk, Jerzy Józwik, Bogdan Kozik, Piotr Mikulski
Adv. Sci. Technol. Res. J. 2023; 17(2):12-24
DOI: https://doi.org/10.12913/22998624/158838
 

Geometrical Accuracy of Threaded Elements Manufacture by 3D Printing Process
Grzegorz Budzik, Tomasz Dziubek, Andrzej Kawalec, Paweł Turek, Anna Bazan, Mariusz Dębski, Jerzy Józwik, Przemysław Poliński, Mateusz Kiełbicki, Łukasz Kochmański, Mariusz Oleksy, Józef Cebulski, Andrzej Paszkiewicz, Ivan Kuric
Adv. Sci. Technol. Res. J. 2023; 17(1):35-45
DOI: https://doi.org/10.12913/22998624/157393
 

Dimensional-Shape Verification of a Selected Part of Machines Manufactured by Additive Techniques
Jacek Bernaczek, Grzegorz Budzik, Tomasz Dziubek, Łukasz Przeszłowski, Kinga Wójciak
Adv. Sci. Technol. Res. J. 2023; 17(1):46-57
DOI: https://doi.org/10.12913/22998624/157289
 

Influence of the Titanium Carbide Reinforcing Phase Content on Surface Geometric Structure Parameters of H13 Steel-Based Composite Materials Obtained by Selective Laser Melting
Emilia Bachtiak-Radka, Marta Beata Krawczyk
Adv. Sci. Technol. Res. J. 2022; 16(6):36-49
DOI: https://doi.org/10.12913/22998624/155204
 
Journals System - logo
© 2006-2024 Journal hosting platform by Bentus
Scroll to top