PL EN
RESEARCH ON TRIBOLOGICAL PROPERTIES OF DENTAL COMPOSITE MATERIALS
 
Więcej
Ukryj
1
Fundamentals of Technology Faculty, Lublin University of Technology, Nadbystrzycka 38, 20-618 Lublin, Poland
 
2
Department of Conservative Dentistry and Endodontics, Medical University of Lublin, Karmelica 7 Str., 20-081 Lublin, Poland
 
3
Mechanical Engineering Faculty, Lublin University of Technology, Nadbystrzycka 36 Str., 20-618 Lublin, Poland
 
4
Faculty of Mechanical Engineering and Management, Institute of Mechanical Technology, Poznań University of Technology, Piotrowo 3 Str., 60-965 Poznań, Poland
 
 
Data publikacji: 01-12-2016
 
 
Autor do korespondencji
Krzysztof Dziedzic   

Fundamentals of Technology Faculty, Lublin University of Technology, Nadbystrzycka 38, 20-618 Lublin, Poland
 
 
Adv. Sci. Technol. Res. J. 2016; 10(32):144-149
 
SŁOWA KLUCZOWE
DZIEDZINY
 
STRESZCZENIE
Dental practice today used a lot of different materials. This paper evaluates tribological and mechanical properties of two dental materials CeramX and I-Light. Tribological analysisad of samples was conducted at temperature 37°C and in the environment of artificial saliva. The wear rate was evaluated with a ball-on-disc tribotester, in accordance to ASTM G-133 norm. The counterbodies were 6-mm-in-diameter Al2O3 steel balls. The load of 2, 10 and 20 N was applied. The tests were conducted at 0.15 m/s sliding velocity over a sliding stroke of 1000 m. The changes in the value of the following parameters were measured during the trials: friction coefficient, friction force, temperature and wear depth. After completing the tribological tests the surface of samples was carried out.
Journals System - logo
Scroll to top