PL EN
 
PL EN
Bieżące wydanie
O czasopiśmie
Zespół Redakcyjny
Redakcja i Wydawca
Opłaty za publikacje
Open Access

vol. 16, 5, 2022
 
 

Suppressing of Co-Extracted Electrons in a Negative Ion Source-Numerical Simulation
Marcin Turek, Paweł Węgierek
Adv. Sci. Technol. Res. J. 2022; 16(5):1-10
DOI: https://doi.org/10.12913/22998624/152821
 

Modification of Optical, Electronic and Microstructural Properties of PET by 150 keV Cs+ Irradiation
Michał Musiatowicz, Marcin Turek, Andrzej Droździel, Krzysztof Pyszniak, Wojciech Grudziński
Adv. Sci. Technol. Res. J. 2022; 16(5):11-19
DOI: https://doi.org/10.12913/22998624/154730
 

New Approach to Non-Volatile Metal Ion Production Using Plasma Ion Source with Internal Evaporator
Marcin Turek, Andrzej Droździel, Krzysztof Pyszniak, Janusz Filiks, Paweł Węgierek
Adv. Sci. Technol. Res. J. 2022; 16(5):20-27
DOI: https://doi.org/10.12913/22998624/152528
 

Construction and Verification for Metrological Properties of the Prototype Magnetic Head for Nondestructive Testing of Lift Guide Rail Wear under Test Conditions
Tomasz Krakowski, Hubert Ruta, Paweł Lonkwic, Arkadiusz Tofil
Adv. Sci. Technol. Res. J. 2022; 16(5):28-39
DOI: https://doi.org/10.12913/22998624/153045
 

Solar Heating for Pit Thermal Energy Storage – Comparison of Solar Thermal and Photovoltaic Systems in TRNSYS 18
Klaudia Słomczyńska, Paweł Mirek, Marcin Panowski
Adv. Sci. Technol. Res. J. 2022; 16(5):40-51
DOI: https://doi.org/10.12913/22998624/153015
 

Influence of 3D Printing Parameters by FDM Method on the Mechanical Properties of Manufactured Parts
Jarosław Zubrzycki, Quirino Estrada, Michał Staniszewski, Magdalena Marchewka
Adv. Sci. Technol. Res. J. 2022; 16(5):52-63
DOI: https://doi.org/10.12913/22998624/154024
 

Calibration of Selected Bulk Biomaterials Parameters for DEM Simulation of Comminution Process. Case Study: Corn and Rice Grains
Weronika Kruszelnicka, Jan Diviš, Jakub Hlosta, Łukasz Adam Gierz, David Žurovec
Adv. Sci. Technol. Res. J. 2022; 16(5):64-77
DOI: https://doi.org/10.12913/22998624/152990
 

Hydrogen Enriched Hydrocarbons as New Energy Resources – As Studied by Means of Computer Simulations
Andrzej Wasiak, Olga Orynycz, Karol Tucki, Antoni Świć
Adv. Sci. Technol. Res. J. 2022; 16(5):78-85
DOI: https://doi.org/10.12913/22998624/154001
 

Modeling of a Primary Air Distribution in a Plenum Chamber of the 700 MWth Circulating Fluidized Bed Boiler
Paweł Mirek
Adv. Sci. Technol. Res. J. 2022; 16(5):86-99
DOI: https://doi.org/10.12913/22998624/152673
 

Experimental Research on the Influence of the Composition of the Fuel Mixture on the Operating Parameters of a Single-Cylinder Common Rail Diesel Engine
Karol Tucki, Remigiusz Mruk
Adv. Sci. Technol. Res. J. 2022; 16(5):100-109
DOI: https://doi.org/10.12913/22998624/153965
 

Demonstrator of a Digital Twin for Education and Training Purposes as a Web Application
Stanislaw Flaga, Kacper Pacholczak
Adv. Sci. Technol. Res. J. 2022; 16(5):110-119
DOI: https://doi.org/10.12913/22998624/152927
 

Industrial Application of Deep Neural Network for Aluminum Casting Defect Detection in Case of Unbalanced Dataset
Michał Awtoniuk, Dariusz Majerek, Artur Myziak, Cyprian Gajda
Adv. Sci. Technol. Res. J. 2022; 16(5):120-128
DOI: https://doi.org/10.12913/22998624/154963
 

Experimental Determination of the Mode I Fracture Toughness in FRP Laminates with Hybrid Delamination Interfaces
Jakub Rzeczkowski, Sylwester Samborski, Katarzyna Prokopek
Adv. Sci. Technol. Res. J. 2022; 16(5):129-135
DOI: https://doi.org/10.12913/22998624/154943
 

A Lean Robotics Approach to the Scheduling of Robotic Adhesive Dispensing Process
Łukasz Sobaszek
Adv. Sci. Technol. Res. J. 2022; 16(5):136-146
DOI: https://doi.org/10.12913/22998624/152332
 

Crystal Lattice Damage and Recovery of Rare-Earth implanted Wide Bandgap Oxides
Elżbieta Guziewicz, Sarwar Mahwish, Ratajczak Renata, Ivanov Yu. Vitalij, Mishra Sushma, Turek Marcin, Wierzbicka Aleksandra, Wozniak Wojciech
Adv. Sci. Technol. Res. J. 2022; 16(5):147-154
DOI: https://doi.org/10.12913/22998624/153942
 

Multi-Criteria Decision Making of Abrasive Water Jet Machining Process for 2024-T3 Alloy Using Hybrid Approach
Waqass S. Khudhir, Mohanad Qusay Abbood, Jalil J. Shukur
Adv. Sci. Technol. Res. J. 2022; 16(5):155-162
DOI: https://doi.org/10.12913/22998624/154040
 

An Elastic-Plastic Analysis of Polycrystalline Structure Using Crystal Plasticity Modelling – Theory and Benchmark Tests
Marta Wójcik, Andrzej Skrzat
Adv. Sci. Technol. Res. J. 2022; 16(5):163-177
DOI: https://doi.org/10.12913/22998624/154025
 

Biogas Recovery from Refinery Oily Sludge by Co-Digestion Followed by Sustainable Approach for Recycling the Residual Digestate in Concrete Mixes
Zainab Ziad Ismail, Hassan Saad Jasim
Adv. Sci. Technol. Res. J. 2022; 16(5):178-191
DOI: https://doi.org/10.12913/22998624/154038
 

Environmental Aspects of a Common Rail Diesel Engine Fuelled with Biodiesel/Diesel Blends
Wincenty Lotko, Ruslans Smigins, Dimitrios Tziourtzioumis, Milena Górska
Adv. Sci. Technol. Res. J. 2022; 16(5):192-201
DOI: https://doi.org/10.12913/22998624/154575
 

Impact of T-Splitter on the Laminar Flow Field Around Cylinder Pier
Rafi Mohammed Qasim, Safaa Hameed Faisal, Tahseen Ali Jabbar
Adv. Sci. Technol. Res. J. 2022; 16(5):202-215
DOI: https://doi.org/10.12913/22998624/154795
 

The Influence of Natural Aging of the AlCu4Mg1 Aluminum Sheet Alloy on the Constitutive Parameters of Selected Models of Flow Stress
Stanisław Kut, Grzegorz Pasowicz, Feliks Stachowicz
Adv. Sci. Technol. Res. J. 2022; 16(5):216-229
DOI: https://doi.org/10.12913/22998624/154792
 

FEM Simulation of Different Engine Mount Models in an Aircraft Piston Diesel Engine
Paweł Magryta, Konrad Pietrykowski, Piotr Borowiec
Adv. Sci. Technol. Res. J. 2022; 16(5):230-241
DOI: https://doi.org/10.12913/22998624/155092
 

Time Distribution Analysis of 3D Prints with the Use of a Filament and Masked Stereolithography Resin 3D Printer
Magdalena Paśnikowska-Łukaszuk, Katarzyna Korulczyk, Kamil Kapłon, Arkadiusz Urzędowski, Magda Wlazło-Ćwiklińska
Adv. Sci. Technol. Res. J. 2022; 16(5):242-249
DOI: https://doi.org/10.12913/22998624/154926
 

Strategies of Heating and Hardening External Corners on the Example of Bending Tools for Press Brakes
Irena Nowotyńska, Stanisław Kut
Adv. Sci. Technol. Res. J. 2022; 16(5):250-260
DOI: https://doi.org/10.12913/22998624/154895
 

The Effect of Undercut Anchor Diameter on the Rock Failure Cone Area in Pullout Tests
Józef Jonak, Robert Karpiński, Andrzej Wójcik, Michał Siegmund
Adv. Sci. Technol. Res. J. 2022; 16(5):261-270
DOI: https://doi.org/10.12913/22998624/154894
 

Design of Metallurgical Production in the Context of Industry 4.0
Vladimír Rudy, Peter Malega, Naqib Daneshjo, Juraj Kováč
Adv. Sci. Technol. Res. J. 2022; 16(5):271-276
DOI: https://doi.org/10.12913/22998624/155036
 

The Applications of Graph Algorithms to Modeling of Integrated Urban Water Management System
Ewa Łazuka, Anna Futa, Magdalena Jastrzębska, Grzegorz Łagód, Bartosz Szeląg, Francesco Fatone
Adv. Sci. Technol. Res. J. 2022; 16(5):277-289
DOI: https://doi.org/10.12913/22998624/155037
 

A Novel Simple Technique for Measuring the Volumetric Flow Rate and Direction of Flow Inside a Pipe – The Single and Double Coils Sensors
Asem Mohammad AL Jarrah
Adv. Sci. Technol. Res. J. 2022; 16(5):290-298
DOI: https://doi.org/10.12913/22998624/155038
 

Procedural Analysis of the Parameters of 3D Printing Technology in the Process of Manufacturing Objects for Visually Impaired People
Jerzy Montusiewicz, Marcin Barszcz, Sylwester Tomasz Korga
Adv. Sci. Technol. Res. J. 2022; 16(5):299-311
DOI: https://doi.org/10.12913/22998624/155186
 

Characterization of the Structural and Physical Properties of the Thermoplastic Starch Film with Kaolinite and Beeswax Addition
Karolina Julia Beer-Lech, Anna Skic, Kamil Skic, Zbigniew Stropek
Adv. Sci. Technol. Res. J. 2022; 16(5):312-323
DOI: https://doi.org/10.12913/22998624/155188
 

Assessment of the Effectiveness of Soil Reclamation Techniques Degraded by the Sulfur Industry
Marta Bik-Małodzińska, Grażyna Żukowska, Iwona Paśmionka, Kamila Rybczyńska-Tkaczyk, Anna Jakubczyk
Adv. Sci. Technol. Res. J. 2022; 16(5):324-334
DOI: https://doi.org/10.12913/22998624/155192
 

Fractal Dimension as Robust Estimate of Low Carbon Steels Hardness
Krzysztof Zając, Karolina Płatek, Paweł Wachel, Leszek Łatka
Adv. Sci. Technol. Res. J. 2022; 16(5):335-344
DOI: https://doi.org/10.12913/22998624/155799
 
Journals System - logo
© 2006-2024 Journal hosting platform by Bentus
Scroll to top