PL EN
 
PL EN
Bieżące wydanie
O czasopiśmie
Zespół Redakcyjny
Redakcja i Wydawca
Opłaty za publikacje
Open Access

vol. 13, 3, 2019
 
 

Plastic Deformation, Mechanical and Adhesive Properties of Bio-Plastic Material
Hamdi Abdulhamid Raghs
Adv. Sci. Technol. Res. J. 2019; 13(3):1-15
DOI: https://doi.org/10.12913/22998624/109790
 

An Algorithm in the Process of Planning of Safety Pathway – a Collision-Free Pathway of a Robot
Naqib Daneshjo, Cecilia Olexova, Marian Kralik, Enayat Danishjoo
Adv. Sci. Technol. Res. J. 2019; 13(3):16-23
DOI: https://doi.org/10.12913/22998624/110154
 

Development of Parametric CAD Model and Structural Analysis of the Car Jack
Nedim Pervan, Adis Jasmin Muminović, Adil Muminović, Muamer Delić
Adv. Sci. Technol. Res. J. 2019; 13(3):24-30
DOI: https://doi.org/10.12913/22998624/109791
 

Tensile Forces in Lift Carrier Ropes Exerted by the Fluid Pressure
Leopold Hrabovský
Adv. Sci. Technol. Res. J. 2019; 13(3):31-37
DOI: https://doi.org/10.12913/22998624/110050
 

Influence of the Trochoidal Tool Path on Quality Surface of Groove Walls
Kamil Piotr Waszczuk, Hubert Skowronek, Paweł Karolczak, Maciej Kowalski, Marek Kołodziej
Adv. Sci. Technol. Res. J. 2019; 13(3):38-42
DOI: https://doi.org/10.12913/22998624/109789
 

Kinematic Modeling and Analysis of a Walking Machine (Robot) Leg Mechanism on a Rough Terrain
Tesfaye O. Terefe, Hirpa G. Lemu, Addisu K/Mariam, Tadele B. Tuli
Adv. Sci. Technol. Res. J. 2019; 13(3):43-53
DOI: https://doi.org/10.12913/22998624/109792
 

Analysis of Temperatures in the Cold Storage of Finished Products
Gabriela Bogdanovská, Beáta Stehlíková, Ján Kačur
Adv. Sci. Technol. Res. J. 2019; 13(3):54-66
DOI: https://doi.org/10.12913/22998624/109816
 

The Project of a New Controlling System
Erika Fecková Škrabuľáková, Elena Grešová, Jozef Svetlík
Adv. Sci. Technol. Res. J. 2019; 13(3):67-75
DOI: https://doi.org/10.12913/22998624/110105
 

Investigation of Electrical Properties for Cantilever-Based Piezoelectric Energy Harvester
Ahsan Ali, Riffat Asim Pasha, Muhammad Abdullah Sheeraz, Zubair Butt, Hassan Elahi, Afzaal Ahmed Khan
Adv. Sci. Technol. Res. J. 2019; 13(3):76-85
DOI: https://doi.org/10.12913/22998624/110175
 

Mobile Devices and Applications Use for Students of Technological Education
Halina Rarot, Olexandr Omelchuk, Vitaliy Tsisaruk
Adv. Sci. Technol. Res. J. 2019; 13(3):86-89
DOI: https://doi.org/10.12913/22998624/109783
 

Experimental Research of the Weakening of the fFuselage Skin by RFSSW Single Row Joints
Andrzej Kubit, Magdalena Bucior, Rafał Kluz, Wojciech Bochnowski, Ryszard Perłowski
Adv. Sci. Technol. Res. J. 2019; 13(3):90-97
DOI: https://doi.org/10.12913/22998624/110373
 

A New Method for an Electric Vehicle Wireless Charging System Using LCC
Hamid Reza Khademi, Mahmoud Samiei Moghaddam, Seyyed Javad Mohammadi Baygi, Amin Hajizadeh
Adv. Sci. Technol. Res. J. 2019; 13(3):98-112
DOI: https://doi.org/10.12913/22998624/110104
 

Application of Nanoparticles in the Process of Phase Change Paraffin in a Chamber
Asad Alizadeh
Adv. Sci. Technol. Res. J. 2019; 13(3):113-119
DOI: https://doi.org/10.12913/22998624/110372
 

Assessment of Tribological Properties of Single- and Double-Layer Pad Coatings Deposited onto Cultivator Points
Wiesław Wójcik, Marcin Barszcz, Krzysztof Dziedzic, Jarosław Kuzioła, Przemysław Kowalik
Adv. Sci. Technol. Res. J. 2019; 13(3):120-128
DOI: https://doi.org/10.12913/22998624/111780
 

Effect of Natural Aging and Fatigue Crack Propagation Rate on Welded and Non-Welded Aluminum Alloy (AA2219˗T87)
Mudasir Ijaz, Faisal Qayyum, Hassan Elahi, Mudaser Ullah, Marco Eugeni, Saeed Badshah, Paolo Gaudenzi
Adv. Sci. Technol. Res. J. 2019; 13(3):129-143
DOI: https://doi.org/10.12913/22998624/110737
 

Numerical Crush Analysis of Thin-Walled Aluminium Columns with Square Cross-Section and a Partial Foam Filling
Mirosław Ferdynus, Michał Rogala
Adv. Sci. Technol. Res. J. 2019; 13(3):144-151
DOI: https://doi.org/10.12913/22998624/110611
 

A Risk Analysis and Ranking Application for Lifting Vehicles Used in Construction Sites with Integrated AHP and Fine-Kinney Approach
Fatih Yılmaz, Mehmet Selim Ozcan
Adv. Sci. Technol. Res. J. 2019; 13(3):152-161
DOI: https://doi.org/10.12913/22998624/111779
 

Effect of Distilled Water and Kerosene as Dielectrics on Machining Rate and Surface Morphology of Al-6061 During Electric Discharge Machining
Rubab Arshad, Shahid Mehmood, Masood Shah, Muhammad Imran, Faisal Qayyum
Adv. Sci. Technol. Res. J. 2019; 13(3):162-169
DOI: https://doi.org/10.12913/22998624/111846
 

Failure Analysis of Thin-Walled Composite Profile Subjected to Axial Compression
Patryk Różyło
Adv. Sci. Technol. Res. J. 2019; 13(3):170-178
DOI: https://doi.org/10.12913/22998624/111967
 

Comparing of Microhardness of the Stellite 6 Cobalt Alloy Implanted with 175 keV Mn+ Ions and 120 keV N+ Ions
Mariusz Kamiński, Piotr Budzyński, Mirosław Szala, Marcin Turek
Adv. Sci. Technol. Res. J. 2019; 13(3):179-185
DOI: https://doi.org/10.12913/22998624/111965
 

Fretting-Wear Mechanism of Textured Surfaces
Mykhaylo Pashechko, Volodymyr Marchuk, Myroslav Kindrachuk, Oleksandr Tisov, Anatolii Kornienko, Oleksandr Dukhota
Adv. Sci. Technol. Res. J. 2019; 13(3):186-191
DOI: https://doi.org/10.12913/22998624/111966
 

Vibration Based Gear Fault Diagnosis under Empirical Mode Decomposition and Power Spectrum Density Analysis
Muhammad Ammar Akram, Shahab Khushnood, Syeda Laraib Tariq, Hafiz Muhammad Ali, Luqman Ahmad Nizam
Adv. Sci. Technol. Res. J. 2019; 13(3):192-200
DOI: https://doi.org/10.12913/22998624/111663
 

Metallographic Comparison of Copper and Brass Plasma Reactor Electrodes After a Month of Operation
Sebastian Gnapowski, Pietraszek Aleksandra, Elżbieta Kalinowska-Ozgowicz
Adv. Sci. Technol. Res. J. 2019; 13(3):201-209
DOI: https://doi.org/10.12913/22998624/111781
 

Effect of Tool Kinematics on Tube Flanging by Extrusion with a Moving Sleeve
Grzegorz Winiarski, Tomasz Adam Bulzak, Łukasz Wójcik, Mirosław Szala
Adv. Sci. Technol. Res. J. 2019; 13(3):210-216
DOI: https://doi.org/10.12913/22998624/110741
 

System Identification and Model Predictive Control of the Chatter Phenomenon in Turning Process
Atiyeh Karimipour, Mohsen Emami
Adv. Sci. Technol. Res. J. 2019; 13(3):217-228
DOI: https://doi.org/10.12913/22998624/111705
 
Journals System - logo
© 2006-2024 Journal hosting platform by Bentus
Scroll to top