PL EN
 
PL EN
Bieżące wydanie
O czasopiśmie
Zespół Redakcyjny
Redakcja i Wydawca
Opłaty za publikacje
Open Access

vol. 14, 1, 2020
 
 

Analysis of the Possibilities of Improving the Selected Properties Surface Layer of Butt Joints Made Using the FSW Method
Magdalena Bucior, Rafał Kluz, Andrzej Kubit, Kamil Ochał
Adv. Sci. Technol. Res. J. 2020; 14(1):1-9
DOI: https://doi.org/10.12913/22998624/111662
 

Strength of Assembly Butt Joints of Plastic Pipes
Izabela Miturska, Anna Rudawska, Valentina Brunella
Adv. Sci. Technol. Res. J. 2020; 14(1):10-17
DOI: https://doi.org/10.12913/22998624/113544
 

Influence of Semi-Active Suspension Characteristics on the Driving Comfort
Robertas Pečeliūnas
Adv. Sci. Technol. Res. J. 2020; 14(1):18-25
DOI: https://doi.org/10.12913/22998624/113282
 

The Use of a Plate Conveyor for Transporting Aluminum Cans in the Food Industry
Iwona Katarzyna Rybicka, Jacek Caban
Adv. Sci. Technol. Res. J. 2020; 14(1):26-31
DOI: https://doi.org/10.12913/22998624/113283
 

The Substantiation of the Optimal Parameters for Dough Pinning-Out Rollers
Tetiana Vitenko, Igor Stadnik, Paweł Droździel, Anna Rudawska
Adv. Sci. Technol. Res. J. 2020; 14(1):32-41
DOI: https://doi.org/10.12913/22998624/113611
 

Rapid Manufacturing of Individualized Prosthetic Sockets
Filip Górski, Radosław Wichniarek, Wiesław Kuczko, Magdalena Żukowska, Ewa Suszek
Adv. Sci. Technol. Res. J. 2020; 14(1):42-49
DOI: https://doi.org/10.12913/22998624/113425
 

Proposal of a Mechanism for Car Seat Movement
Vladimír Pavelčík, Dalibor Barta, Milan Sapieta
Adv. Sci. Technol. Res. J. 2020; 14(1):50-57
DOI: https://doi.org/10.12913/22998624/113286
 

The Strength of the Adhesive Joints of the Medium-Density Fireboards and Particle Boards with the PVC Film
Anna Rudawska, Dana Stančeková, Mirosław Müller, Tatiana Vitenko, Vlodymyr Iasnii
Adv. Sci. Technol. Res. J. 2020; 14(1):58-68
DOI: https://doi.org/10.12913/22998624/113612
 

Realization and Verification of Data Conversion from Laser Scanner to FEM
Alžbeta Sapietová, Ondrej Štalmach, Milan Sága, Dana Stančeková, Lukáš Gajdoš
Adv. Sci. Technol. Res. J. 2020; 14(1):69-74
DOI: https://doi.org/10.12913/22998624/113285
 

The Effect of Artificial Ageing on the Mechanical Properties of the EN AW 2017 Alloy
Klara Jirounkova, Jan Vozka, Jaromir Cais
Adv. Sci. Technol. Res. J. 2020; 14(1):75-80
DOI: https://doi.org/10.12913/22998624/113614
 

Use of the Dynamic Simulation to Reduce Handling Complexity in the Manufacturing Process
Vladimíra Schindlerová, Ivana Šajdlerová
Adv. Sci. Technol. Res. J. 2020; 14(1):81-88
DOI: https://doi.org/10.12913/22998624/113616
 

Experimental Investigation of Cutting Forces in High-Feed Milling of Titanium Alloy
Jana Petrů, Lukáš Drábek, Jiří Hajnyš, Dalibor Jurok, Marek Pagáč, Jakub Měsíček
Adv. Sci. Technol. Res. J. 2020; 14(1):89-95
DOI: https://doi.org/10.12913/22998624/113615
 

Design of the Optimal Geometry of the Moulded Piece Based on Numerical Analyses in Cadmould 3D-F
Paweł Mańko, Łukasz Majewski
Adv. Sci. Technol. Res. J. 2020; 14(1):96-106
DOI: https://doi.org/10.12913/22998624/114961
 

The Influence of Technological Factors on the Strength of Adhesive Joints of Steel Sheets
Elżbieta Doluk, Anna Rudawska, Valentina Brunella
Adv. Sci. Technol. Res. J. 2020; 14(1):107-115
DOI: https://doi.org/10.12913/22998624/116549
 

Vertical Forces Acting on the Lock-Off Element of the Pallet Brake System
Leopold Hrabovský, Tomáš Mlčák
Adv. Sci. Technol. Res. J. 2020; 14(1):116-126
DOI: https://doi.org/10.12913/22998624/113607
 

Numerical Modeling of Superplastic Punchless Deep Drawing Process of a Ti-6Al-4V Titanium Alloy
Marta Wójcik, Andrzej Skrzat
Adv. Sci. Technol. Res. J. 2020; 14(1):127-136
DOI: https://doi.org/10.12913/22998624/114029
 

Development of Ammunition with Unconventional Applications
Olgierd Janusz Goroch, Gulbinowicz Zbigniew, Cybula Leszek
Adv. Sci. Technol. Res. J. 2020; 14(1):137-144
DOI: https://doi.org/10.12913/22998624/115515
 

Numerical Analysis of the Cross-Wedge of a Hollow Rail Axle
Zbigniew Pater, Konrad Lis, Patrycja Walczuk-Gągała
Adv. Sci. Technol. Res. J. 2020; 14(1):145-153
DOI: https://doi.org/10.12913/22998624/115513
 

On the Identification of Local Structural Defects in Composite Thin-Walled Structures
Henryk Kopecki, Łukasz Piotr Święch, Radosław Kołodziejczyk
Adv. Sci. Technol. Res. J. 2020; 14(1):154-166
DOI: https://doi.org/10.12913/22998624/115812
 

Highly Efficient Milling on the Example of Selected Machining Strategies
Kazimierz Zaleski, Jakub Matuszak, Andrzej Zyśko
Adv. Sci. Technol. Res. J. 2020; 14(1):167-177
DOI: https://doi.org/10.12913/22998624/116356
 

Diagnostics of Transient States in Hydraulic Pump System with Short Time Fourier Transform
Krzysztof Przystupa, Bartłomiej Ambrożkiewicz, Grzegorz Litak
Adv. Sci. Technol. Res. J. 2020; 14(1):178-183
DOI: https://doi.org/10.12913/22998624/116971
 

Evaluation of Material Data to the Numerical Strain-Life Analysis of the Compressor Blade Subjected to Resonance Vibrations
Arkadiusz Stefan Bednarz
Adv. Sci. Technol. Res. J. 2020; 14(1):184-190
DOI: https://doi.org/10.12913/22998624/117115
 

Analysis of Linkage Mechanisms with Internal Driving Link
Mykhaylo Pashechko, Viacheslav Pasika, Nataliya Hembara, Viacheslav Kharzhevskyi
Adv. Sci. Technol. Res. J. 2020; 14(1):191-200
DOI: https://doi.org/10.12913/22998624/117426
 

Numerical Analysis of a Six Stage Forging Process for Producing Hollow Flanged Parts from Tubular Blanks
Grzegorz Winiarski, Tomasz Adam Bulzak, Łukasz Wójcik, Mirosław Szala
Adv. Sci. Technol. Res. J. 2020; 14(1):201-208
DOI: https://doi.org/10.12913/22998624/116748
 

Analysis of Mechanical and Thermal Stresses in a Pressure Casting Machine Plunger
Jacek Jankowski, Dariusz Kołakowski, Bogusław Pisarek
Adv. Sci. Technol. Res. J. 2020; 14(1):209-223
DOI: https://doi.org/10.12913/22998624/117724
 
Journals System - logo
© 2006-2024 Journal hosting platform by Bentus
Scroll to top