PL EN
MEASURING OF MECHANICAL RESISTANCES OF A HEAVY GOOD VEHICLE BY COASTDOWN TEST
 
Więcej
Ukryj
1
University of Žilina, Faculty of Operation and Economics of Transport and Communications, Univerzitná 1, 010 26, Žilina, Slovak Republic
 
2
Silesian University of Technology, Faculty of Transport, 8 Krasinskiego Street, 40-019, Katowice, Poland
 
 
Data publikacji: 01-06-2018
 
 
Autor do korespondencji
Tomáš Skrúcaný   

University of Žilina, Faculty of Operation and Economics of Transport and Communications, Univerzitná 1, 010 26, Žilina, Slovak Republic
 
 
Adv. Sci. Technol. Res. J. 2018; 12(2):214-221
 
SŁOWA KLUCZOWE
DZIEDZINY
 
STRESZCZENIE
Mechanical resistance consists of the rolling tire resistance and power losses of vehicle drive train. Rolling resistance is done by deformation of vehicle tires on road surface. Power losses represent resistances of bearings and wheels rolling and oil wading. This resistance acts continuously during vehicle wheels rotation. The value of this driving resistance is possible to test by different methods. Laboratory tests on rotating drum or dynamometer are usually used. This paper deals about rare method – coastdown exterior driving test. It was done with a casual truck trailer set. Results of this test method show the value of this resistance forces which are converted in to coefficient of mechanical resistance and discussed in the point of view of rolling resistance coefficient values.
Journals System - logo
Scroll to top