PL EN
 
PL EN
Current issue
About the Journal
Editorial Board
Editorial Office and Publisher
Article Processing Charge
Open Access

Keyword simulation

 

On the Bahadur Representation of Quantiles for a Sample from ρ*-Mixing Structure Population
Dagmara Dudek, Anna Kuczmaszewska
Adv. Sci. Technol. Res. J. 2022; 16(3):316-330
DOI: https://doi.org/10.12913/22998624/150480
 

Simulation of Superfinished Surface Formation
Augustín Görög
Adv. Sci. Technol. Res. J. 2021; 15(2):219-227
DOI: https://doi.org/10.12913/22998624/133064
 

Proposal of a Method for Measuring Gas Flow in a Heating Furnace: A Simulation Study
Marcel Pástor, Milan Durdán, Ján Kačur, Marek Laciak, Patrik Flegner
Adv. Sci. Technol. Res. J. 2021; 15(2):1-12
DOI: https://doi.org/10.12913/22998624/132952
 

Optimization of Welding Pliers Production for the Automotive Industry – Case Study
Nikoleta Husakova Mikušová, Soňa Badiarová, Karel Jeřábek
Adv. Sci. Technol. Res. J. 2020; 14(4):240-249
DOI: https://doi.org/10.12913/22998624/128105
 

Use of the Dynamic Simulation to Reduce Handling Complexity in the Manufacturing Process
Vladimíra Schindlerová, Ivana Šajdlerová
Adv. Sci. Technol. Res. J. 2020; 14(1):81-88
DOI: https://doi.org/10.12913/22998624/113616
 

Modelling Noise Exposure by Means of Infrared Technology
Gabriel Fedorko, David Heinz, Vieroslav Molnár, Tomas Brenner
Adv. Sci. Technol. Res. J. 2019; 13(4):230-238
DOI: https://doi.org/10.12913/22998624/112683
 

Traffic Modelling of the Circular Junction in the City of Žilina
Kristián Čulík, Veronika Harantová, Alica Kalašová
Adv. Sci. Technol. Res. J. 2019; 13(4):162-169
DOI: https://doi.org/10.12913/22998624/111476
 

Dynamic and Stress Analysis of a Locking Mechanism in the Ansys Workbench Software Environment
Alžbeta Sapietová, Pavol Novák, Milan Sága, Peter Šulka, Milan Sapieta
Adv. Sci. Technol. Res. J. 2019; 13(1):23-28
DOI: https://doi.org/10.12913/22998624/101601
 

Construction Optimisation of the Lift Carrying Frame Suspension by Using a Numerical Fatigue Analysis
Paweł Lonkwic
Adv. Sci. Technol. Res. J. 2019; 13(1):29-36
DOI: https://doi.org/10.12913/22998624/100630
 

Optimisation of the Lift Carrying Frame Construction by Using Finite Element Method
Paweł Lonkwic
Adv. Sci. Technol. Res. J. 2018; 12(4):207-215
DOI: https://doi.org/10.12913/22998624/100499
 

The Simulation of Conveyor Control System Using the Virtual Commissioning and Virtual Reality
Roman Ruzarovsky, Radovan Holubek, Daynier Rolando Delgado Sobrino, Matej Janíček
Adv. Sci. Technol. Res. J. 2018; 12(4):164-171
DOI: https://doi.org/10.12913/22998624/100349
 

Use of Simulation for Waste Management and Reverse Material Flow
Nikoleta Mikušová, Eva Tomková, Miroslav Dovica, Borna Debelic, Ana Peric-Hadzic, Jozef Zajac
Adv. Sci. Technol. Res. J. 2018; 12(4):136-143
DOI: https://doi.org/10.12913/22998624/94965
 

ASSESSMENT OF THE ECONOMIC EFFICIENCY OF THE MODERNIZATION OF CRUSHED STONE MANUFACTURING PROCESS: CASE STUDY
Jana Fabianová, Jaroslava Janeková, Michal Fabian
Adv. Sci. Technol. Res. J. 2018; 12(2):237-243
DOI: https://doi.org/10.12913/22998624/92299
 

DISCRETE MODEL SIMULATION OF A PASSENGER CABLE CAR OPERATION
Gabriel Fedorko, Hana Neradilová, Juraj Jackanin
Adv. Sci. Technol. Res. J. 2018; 12(2):170-179
DOI: https://doi.org/10.12913/22998624/92108
 

Possibilities of More Efficient Use of Simulation Tools in Enterprise Logistics
Matúš Hegedüš, Gabriel Fedorko, Matúš Beluško, Martina Hlatká, Pavel Fábera, Hana Neradilová
Adv. Sci. Technol. Res. J. 2017; 11(4):189-197
DOI: https://doi.org/10.12913/22998624/80319
 

Artificial Neural Network Modelling of Vibration in the Milling of AZ91D Alloy
Ireneusz Zagórski, Monika Kulisz, Aleksandra Semeniuk, Anna Malec
Adv. Sci. Technol. Res. J. 2017; 11(3):261-269
DOI: https://doi.org/10.12913/22998624/76546
 

Feeder Type Optimisation for the Plain Flow Discharge Process of an Underground Hopper by Discrete Element Modelling
Jan Nečas, Jakub Hlosta, David Žurovec, Martin Žídek, Jiří Rozbroj, Jiří Zegzulka
Adv. Sci. Technol. Res. J. 2017; 11(3):246-252
DOI: https://doi.org/10.12913/22998624/76100
 

DESIGN OF A CALCULATION FEM MODEL OF THE TEST STATIC STAND OF PIPE CONVEYOR FOR ANALYSIS OF CONTACT FORCES
Gabriel Fedorko, Vieroslav Molnar
Adv. Sci. Technol. Res. J. 2017; 11(2):220-225
DOI: https://doi.org/10.12913/22998624/71268
 

MODELLING CHARACTERISTICS OF SPARK IGNITION ENGINE INJECTION SYSTEM
Mieczysław Dziubiński, Grzegorz Litak, Artur Drozd, Piotr Żukowicz
Adv. Sci. Technol. Res. J. 2017; 11(2):103-117
DOI: https://doi.org/10.12913/22998624/70565
 

MONITORING OF CONCRETE CURING IN EXTRADOSED BRIDGE SUPPORTED BY NUMERICAL SIMULATION
Aleksandra Mariak, Jacek Chróścielewski, Agnieszka Sabik, Błażej Meronk, Krzysztof Wilde
Adv. Sci. Technol. Res. J. 2016; 10(32):254-262
DOI: https://doi.org/10.12913/22998624/66186
 

PERFORMANCE EVALUATION OF LIQUID-COOLED PHOTOVOLTAIC SYSTEM USING NUMERICAL METHOD
Yasaman Khanjari, Alibakhsh Kasaeian, Fatolah Pourfayaz, Reza Alayi
Adv. Sci. Technol. Res. J. 2016; 10(32):184-192
DOI: https://doi.org/10.12913/22998624/65115
 

USING OF NON-CONVENTIONAL FUELS IN HYBRID VEHICLE DRIVES
Dalibor Barta, Martin Mruzek, Martin Kendra, Pawel Kordos, Leszek Krzywonos
Adv. Sci. Technol. Res. J. 2016; 10(32):240-247
DOI: https://doi.org/10.12913/22998624/65108
 

INVESTIGATION OF COMBUSTION, PERFORMANCE AND EMISSION CHARACTERISTICS OF SPARK IGNITION ENGINE FUELLED WITH BUTHANOL – GASOLINE MIXTURE AND A HYDROGEN ENRICHED AIR
Alfredas Rimkus, Mindaugas Melaika, Jonas Matijošius, Šarūnas Mikaliūnas, Saugirdas Pukalskas
Adv. Sci. Technol. Res. J. 2016; 10(31):102-108
DOI: https://doi.org/10.12913/22998624/64071
 

SIMULATION STUDY OF LONGITUDINAL FORCES IN THE COUPLING DEVICE OF HEAVY FREIGHT TRAINS
Józef Stokłosa, Marek Jaśkiewicz
Adv. Sci. Technol. Res. J. 2014; 8(21):24-30
DOI: https://doi.org/10.12913/22998624.1091874
 

MODELING OF HIGH STORAGE SHEET DEPOT WITH PLANT SIMULATION
Andrzej Jardzioch, Jędrzej Jaskowski
Adv. Sci. Technol. Res. J. 2013; 7(17):14-22
DOI: https://doi.org/10.5604/20804075.1036992
 

Autonomous Mobile Robots in Automotive Remanufacturing: A Case Study for Intra-Logistics Support
Jakub Pizoń, Łukasz Wójcik, Arkadiusz Gola, Łukasz Kański, Izabela Nielsen
Adv. Sci. Technol. Res. J. 2024; 18(1):213-230
DOI: https://doi.org/10.12913/22998624/177398
 

Increasing the Efficiency of the Assembly Process Using the FMEA Method and Dynamic Simulation
Gabriel Fedorko, Hana Neradilova, Martin Duriska, Kristian Straka
Adv. Sci. Technol. Res. J. 2023; 17(3):249-256
DOI: https://doi.org/10.12913/22998624/166030
 

Proposal of Workplace Modification in the Assembly Line in Automotive Production
Naqib Daneshjo, Albert Mareš, Peter Malega, Viktor Župčan
Adv. Sci. Technol. Res. J. 2023; 17(3):88-100
DOI: https://doi.org/10.12913/22998624/163423
 

Temperature and Die Angular Effect on Tensile Strength, Hardness, Extrusion Load and Flow Stress in Aluminum 6063 Processed by Equal Channel Angular Extrusion Method
Temitayo M. Azeez, Lateef O. Mudashiru, Tesleem B. Asafa, Saheed Akande, Omolayo M. Ikumapayi, Joseph F. Kayode, Ikenna D. Uchegbu, Sunday A. Afolalu
Adv. Sci. Technol. Res. J. 2023; 17(1):345-353
DOI: https://doi.org/10.12913/22998624/158018
 
Please use the template when preparing your article
Most read
Indexes
 
Keywords index
Authors index
Journals System - logo
© 2006-2024 Journal hosting platform by Bentus
Scroll to top