Scores:
10
MNiSW
92.2
ICV
 
 

Impact of the Technological Conditions of Plane Surface Machining on a Triangular Milling Cutter on the Residual Hysteresis of the Movement Axis of the Machine

Jan Kral 1  ,  
Tomáš Stejskal 1  ,  
Jaroslav Melko 1  ,  
Ľudmila Pavlikova 1  ,  
Adrián Rjabušin 1  ,  
 
1
Technical University of Kosice, Slovak Republic
Adv. Sci. Technol. Res. J. 2017; 11(3):240–245
Publish date: 2017-09-03
KEYWORDS:
TOPICS:
ABSTRACT:
The paper deals with the possibilities of measuring the residual displacement or hysteresis on the lateral direction of the movement forces caused by the cutting forces of the machining. A special adjustment of laser interferometry assemblies was used for measurement. The measurement results indicate that the positioning accuracy in addition to the cutting forces also influences the position of the displaced moving substances and the temperature. The complex effect of these parameters is greatly dependent on the design of the machine.
CORRESPONDING AUTHOR:
Jan Kral   
Technical University of Kosice, Letna 9, 04200 Kosice, Slovak Republic