PL EN
FEM and Experimental Based Analysis of the Stamping Process of Aluminum Alloy
 
Więcej
Ukryj
1
Mechanical Engineering Faculty, Lublin University of Technology, Nadbystrzycka 36, 20-618 Lublin, Poland
 
 
Data publikacji: 03-09-2017
 
 
Autor do korespondencji
Patryk Różyło   

Mechanical Engineering Faculty, Lublin University of Technology, Nadbystrzycka 36, 20-618 Lublin, Poland
 
 
Adv. Sci. Technol. Res. J. 2017; 11(3):94-101
 
SŁOWA KLUCZOWE
DZIEDZINY
 
STRESZCZENIE
The subject of the study was aluminum samples of varying thickness. The aim of the study was to perform the experimental stamping process of the samples on a universal testing machine and a numerical analysis on two independent computer systems Abaqus® and Deform-3D. As part of the numerical analysis, bilinear material model was included, taking into account elastic and plastic characteristics. The study was conducted in a dynamic environment with geometric nonlinearity. The results obtained from experimental research were confronted with those obtained by FEM computer simulation. During the research, numerical model of the stamping process has been developed, which was validated with the results of experimental research.
Journals System - logo
Scroll to top