PL EN
Effect of Test Velocity on the Energy Absorption Under Progressive Crushing of Composite Tubes
 
Więcej
Ukryj
1
Rzeszow University of Technology, Faculty of Mechanical Engineering and Aeronautics, Powstańców Warszawy Ave. 12, 35-959 Rzeszow, Poland
2
Military University of Technology, Gen. Sylwestra Kaliskiego 2, 00-908 Warsaw 46, Poland
AUTOR DO KORESPONDENCJI
Grażyna Ryzińska   

Rzeszow University of Technology, Faculty of Mechanical Engineering and Aeronautics, Powstańców Warszawy Ave. 12, 35-959 Rzeszow, Poland
Data publikacji: 01-06-2020
 
Adv. Sci. Technol. Res. J. 2020; 14(2):94–102
 
SŁOWA KLUCZOWE
DZIEDZINY
 
STRESZCZENIE
The paper presents the results of compression tests for carbon-epoxy composites in order to assess the amount of energy absorbed depending on the process velocity and content of axial fibres. To prepare specimens with a diameter of 20 mm and a height of 34 mm, two types of prepreg (UD 200 g/m2 and woven 160 g/m2) were used. Specimens were subjected to compression under various speed conditions (static, dynamic and SHPB tests). The calculated SEA values show a 50-60% decrease with increasing process velocity depending on the type of specimens architecture. The highest energy values are absorbed by the specimens with the highest share of axial fibres in the sample.