Dynamics of Railway Vehicles Movement on Transition Curves
Faculty of Production Engineering, University of Life Sciences in Lublin, ul. Akademicka 13, 20-950 Lublin, Poland
Faculty of Geodesy and Cartography, Warsaw University of Technology, Pl. Politechniki 1, 00-661 Warsaw, Poland
Data publikacji: 01-12-2021
Autor do korespondencji
Agata Basak   

University of Life Sciences in Lublin, Poland
Adv. Sci. Technol. Res. J. 2021; 15(4):21-29
Transition curves are an integral part of a route. They connect a straight section with a circular curve or two circular curves with different radii. Due to the forced path, the size and stiffness of the rail vehicle, their correct design is particularly important when constructing rail roads. Basing on the limits of lateral acceleration increment, non-equilibrium centripetal acceleration and wheel lift velocity, set in accordance with the model of motion of a material point moving along a trajectory determined by the track axis, the initial parameters of the considered transition curves were selected: radius of the curve, design speed of the train, length of the transition curve and track cant. The scope of research covered basic dynamic parameters: curvature and its increment, speed and acceleration of wheel lift, track twist and lateral acceleration increment. As a result of conducted analysis it can be stated that polynomial curves deserve special attention in the design of railway routes. By appropriate modification of their equation, it is possible to change easily positions of extremes of particular dynamic parameters and thus to adjust their values to terrain conditions, direction of movement and type of rail vehicle.
Journals System - logo
Scroll to top