DRAFT JIG STRUCTURE DESIGN FOR MEASURING DEFORMATION OF THIN-WALLED ROBOTIC OR CONVEYOR COMPONENTS
			
	
 
Więcej
Ukryj
	
	
									
				1
				TU Kosice FVT Presov, Slovak Republic
				 
			 
						
				2
				SPSE Presov, Slovak Republic
				 
			 
						
				3
				Kielce Universitu of Technology, Department of Mechanical Technology and Metrology, Kielce, Poland
				 
			 
										
				
				
		
		 
			
			
		
		
		
		
		
			
			 
			Data publikacji: 01-09-2018
			 
		 			
		 
	
							
					    		
    			 
    			
    				    					Autor do korespondencji
    					    				    				
    					Peter  Michalik   
    					TU Kosice FVT Presov, Bayerova1, 08001 Prešov, Slovak Republic
    				
 
    			
				 
    			 
    		 		
			
																											 
		
	 
		
 
 
Adv. Sci. Technol. Res. J. 2018; 12(3):55-60
		
 
 
SŁOWA KLUCZOWE
DZIEDZINY
STRESZCZENIE
The paper presents the general function, the division and the description of the main jig parts. It gives account of the basics and principles of a measuring jig structure using CAD applications. The main part delves into design of individual measurement jig options for measuring deformations of thin-walled robotic and conveyor components. Tension and stress analyses for each option have been performed. Subsequent to stress analysis, a suitable option was selected, with a description of its main parts, the production process and the necessary production equipment. Finally, the jig produced for the purpose of measuring deformation of thin-walled robotic and conveyor components is presented.