PL EN
DETERMINATION OF CALIBRATION SPHERE PARAMETERS INFLUENCE ON THE RESULTS OF ARTICULATING PROBE HEAD QUALIFICATION
,
 
,
 
,
 
 
 
Więcej
Ukryj
1
Laboratory of Coordinate Metrology, Cracow University of Technology, al. Jana Pawła II 37, 31-864 Cracow, Poland
AUTOR DO KORESPONDENCJI
Maciej Gruza   

Laboratory of Coordinate Metrology, Cracow University of Technology, al. Jana Pawła II 37, 31-864 Cracow, Poland
Data publikacji: 01-06-2018
 
Adv. Sci. Technol. Res. J. 2018; 12(2):252–259
 
SŁOWA KLUCZOWE
DZIEDZINY
 
STRESZCZENIE
The qualification of probe heads before the measurements performed with their usage is now a standard procedure. It is used for correction of probe head's and measuring tip systematic errors. The calibration sphere which is used for this process should have adequately small form errors. However, it is not always possible to use a highly accurate spheres and a common practice is to use for a long time, a sphere that was provided by the manufacturer of the CMM. This is why, the authors have tried to answer the question about the impact of the calibration sphere inaccuracies on the results of probe head qualification process.