PL EN
CONTROL OF THE PROCESS OF SCREWING IN THE INDUSTRIAL SCREWDRIVERS
 
Więcej
Ukryj
1
Lublin University of Technology, Faculty of Mechanical Engineering, Nadbystrzycka Str. 36, 20-618 Lublin, Poland
 
 
Data publikacji: 01-06-2016
 
 
Autor do korespondencji
Aleksander Nieoczym   

Lublin University of Technology, Nadbystrzycka 36, 20-618 Lublin, Poland
 
 
Adv. Sci. Technol. Res. J. 2016; 10(30):202-206
 
SŁOWA KLUCZOWE
DZIEDZINY
 
STRESZCZENIE
The article presents the results of research on the original screwdriver for industrial applications in the event of the need to obtain the value of tightening torque in narrower tolerances. The operating of the screwdriver is supervised by the control program, which has algorithms implemented for selecting the operating mode. The program also allows archiving operating parameters and visualization of on-line characteristics of screwing. The results allowing to verify the adequacy of the mathematical model of screwdriver operation with actual operating conditions are also presented.
Journals System - logo
Scroll to top