PL EN
Analysis of Mechanical Stability for External Fixation Device in the Case of Anterior-Posterior Bending
 
Więcej
Ukryj
1
Faculty of Mechanical Engineering, University of Sarajevo, Vilsonovo šetalište 9, Sarajevo, Bosnia and Herzegovina
AUTOR DO KORESPONDENCJI
Nedim Pervan   

Faculty of Mechanical Engineering, University of Sarajevo, Vilsonovo šetalište 9, Sarajevo, Bosnia and Herzegovina
 
Adv. Sci. Technol. Res. J. 2022; 16(3):136–142
 
SŁOWA KLUCZOWE
DZIEDZINY
 
STRESZCZENIE
Analysis of mechanical stability for external fixation device Orthofix in the case of anterior-posterior bending is carried out in this paper. Device is applied to the lower leg for the case of unstable fracture. Real device is measured and 3D CAD model is developed. CAD model is used for numerical structural stress analysis which is carried out using CATIA V5 software. Results for displacements are obtained for selected critical places on the device and for the place of fracture. In addition, values of principal and von Misses stresses are obtained and analyzed. Using obtained results, conclusions about mechanical stability of device are formulated.