PL EN
 
PL EN
Bieżące wydanie
O czasopiśmie
Zespół Redakcyjny
Redakcja i Wydawca
Opłaty za publikacje
Open Access
vol. 11, 4, 2017
Statystyki
Pobierz cytowanie
A Tension Equalizer in Lift Carrying Ropes
Leopold Hrabovský 1
,
 
Peter Michalik 2
 
 
 
Więcej
Ukryj
1
Technical University of Ostrava, Ostrava - Poruba, Czech Republic
 
2
FVT TU Košice, Slovak Republic
 
 
Data publikacji: 05-12-2017
 
 
Autor do korespondencji
Leopold Hrabovský   

Technical University of Ostrava, 17. listopadu 15/2172, 708 33 Ostrava - Poruba, Czech Republic
 
 
Adv. Sci. Technol. Res. J. 2017; 11(4):326-332
DOI: https://doi.org/10.12913/22998624/80936
 
 
Artykuł (PDF)
 
SŁOWA KLUCZOWE
tension equalizer
steel rope
contact forces
 
DZIEDZINY
 
STRESZCZENIE
In many high-rise residential buildings or multi-storey warehouses, machinery, so called lifts, is used for the vertical transportation of people or weights between two or more altitudinally distant places. Carriers used for lifts are steel ropes or sprocket chains, on which a cage or a counterbalance is hinged. Apparatus of all carriers, attached to the hinge of the cage or counterbalance, should be even. This can be hundred percently made only by hammer hinge. Fixed or springe hinge cannot be a perfect equalizing apparatus. This article describes an apparatus, which allows an even distribution of the strain into lift carriers, which use springe hinge of carrier ropes.
Udostępnij
Wyślij mailem
ARTYKUŁ POWIĄZANY
REGRESSION MODEL CHANGE OF NORMAL CONTACT FORCES IN HEXAGONAL IDLER HOUSING FOR PIPE CONVEYOR LOADED WITH TRANSPORTED MATERIAL
Device Designed for Detection and Setting the Required Tensile Force in Ropes
DESIGN OF A CALCULATION FEM MODEL OF THE TEST STATIC STAND OF PIPE CONVEYOR FOR ANALYSIS OF CONTACT FORCES
Journals System - logo
© 2006-2024 Journal hosting platform by Bentus
Scroll to top